scholarly journals Mussel‐Inspired Liquid‐Infused Slippery Surfaces: Substrate‐Independent Design of Liquid‐Infused Slippery Surfaces via Mussel‐Inspired Chemistry (Adv. Mater. Interfaces 12/2021)

2021 ◽  
Vol 8 (12) ◽  
pp. 2170066
Author(s):  
Salvatore Chiera ◽  
Carina Bittner ◽  
Nicolas Vogel
Author(s):  
Jerome Hall ◽  
Daniel Turner

The conception, development, and adoption of early AASHO highway design criteria are documented. Examining the early efforts states used to select a design vehicle and develop horizontal curve design criteria illustrates why AASHO’s leadership was necessary. AASHO’s slow and somewhat haphazard criteria development, and the disparity from state to state, demonstrated the need for a national consensus in highway design parameters. AASHO’s role in providing these criteria is outlined through its initial development of policy booklets, followed by its 1954 publication of the landmark Blue Book. The processes by which nine states adopted the AASHO guidance are briefly reviewed. In several cases, the AASHO policy was embraced immediately, and in others it was accepted slowly as states clung to their independent design processes and only gradually updated their design criteria. A few simple conclusions are drawn about the development and adoption process, particularly as it may relate to tomorrow’s highway design criteria.


2021 ◽  
Author(s):  
Cheol Hun Park ◽  
Eun Min Go ◽  
Kyung Min Lee ◽  
Chang Soo Lee ◽  
Sang Kyu Kwak ◽  
...  

Unprecedented substrate-independent polymeric 3D nanosheets were induced via simple solution casting using PEGBEM–POEM comb copolymer. A possible mechanism is the change in the polymer–solvent interactions on the surface.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jay Prakash Bijarniya ◽  
Jahar Sarkar ◽  
Pralay Maiti

AbstractPassive radiative cooling is an emerging field and needs further development of material. Hence, the computational approach needs to establish for effective metamaterial design before fabrication. The finite difference time domain (FDTD) method is a promising numerical strategy to study electromagnetic interaction with the material. Here, we simulate using the FDTD method and report the behavior of various nanoparticles (SiO2, TiO2, Si3N4) and void dispersed polymers for the solar and thermal infrared spectrums. We propose the algorithm to simulate the surface emissive properties of various material nanostructures in both solar and thermal infrared spectrums, followed by cooling performance estimation. It is indeed found out that staggered and randomly distributed nanoparticle reflects efficiently in the solar radiation spectrum, become highly reflective for thin slab and emits efficiently in the atmospheric window (8–13 µm) over the parallel arrangement with slight variation. Higher slab thickness and concentration yield better reflectivity in the solar spectrum. SiO2-nanopores in a polymer, Si3N4 and TiO2 with/without voids in polymer efficiently achieve above 97% reflection in the solar spectrum and exhibits substrate independent radiative cooling properties. SiO2 and polymer combination alone is unable to reflect as desired in the solar spectrum and need a highly reflective substrate like silver.


Author(s):  
Dongqin Li ◽  
Yifeng Guan ◽  
Qingfeng Wang ◽  
Zhitong Chen

The design of ship is related to several disciplines such as hydrostatic, resistance, propulsion and economic. The traditional design process of ship only involves independent design optimization within each discipline. With such an approach, there is no guarantee to achieve the optimum design. And at the same time improving the efficiency of ship optimization is also crucial for modem ship design. In this paper, an introduction of both the traditional ship design process and the fundamentals of Multidisciplinary Design Optimization (MDO) theory are presented and a comparison between the two methods is carried out. As one of the most frequently applied MDO methods, Collaborative Optimization (CO) promotes autonomy of disciplines while providing a coordinating mechanism guaranteeing progress toward an optimum and maintaining interdisciplinary compatibility. However there are some difficulties in applying the conventional CO method, such as difficulties in choosing an initial point and tremendous computational requirements. For the purpose of overcoming these problems, Design Of Experiment (DOE) and a new support vector regression algorithm are applied to CO to construct statistical approximation model in this paper. The support vector regression algorithm approximates the optimization model and is updated during the optimization process to improve accuracy. It is shown by examples that the computing efficiency and robustness of this CO method are higher than with the conventional CO method. Then this new Collaborative Optimization (CO) method using approximate technology is discussed in detail and applied in ship design which considers hydrostatic, propulsion, weight and volume, performance and cost. It indicates that CO method combined with approximate technology can effectively solve complex engineering design optimization problem. Finally, some suggestions on the future improvements are proposed.


2014 ◽  
Vol 312 ◽  
pp. 19-30 ◽  
Author(s):  
Kentaro Izumi ◽  
Francisco J. Rodríguez-Tovar ◽  
Laura Piñuela ◽  
José Carlos García-Ramos

2001 ◽  
Vol 711 ◽  
Author(s):  
Alexander Zelikin ◽  
Venkatram Shastri ◽  
David Lynn ◽  
Jian Farhadi ◽  
Ivan Martin ◽  
...  

ABSTRACTConductive polymers such as polypyrrole (Ppy) are potentially useful as an active interface for altering cellular processes and function. Their utilization in medically related applications however have been substantially held back by their non-degradable nature. Herein we report a novel approach to creation of bioerodible polypyrroles via modification of pyrrole beta-carbon with an ionizable moiety. It has been shown that the erosion rate of acid-bearing derivative of polypyrrole increases with pH, which is consistent with the pH dependent ionization of carboxylic acid group. The novel paradigm proposed for the creation of bioerodible polypyrroles allows for simple and efficient control over the erosion rate of the substrate independent of the polymer chain length, via the choice of the terminal ionizable group and its concentration along the polymer backbone.


Author(s):  
Harrison J. Cox ◽  
Colin P. Gibson ◽  
Gary J. Sharples ◽  
Jas Pal S. Badyal

Sign in / Sign up

Export Citation Format

Share Document