scholarly journals Degradation of PVDF-Coated Fabrics after Engineering Applications: Correlations between Surface Microstructure, Physical Properties, and Mechanical Properties Based on Statistical Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Yingying Shang ◽  
Bin Yang ◽  
Minger Wu ◽  
Youji Tao ◽  
Jiaxiang Qin
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Polyvinylidene Fluoride ◽  
Degradation Mechanism ◽  
Uniaxial Tensile ◽  
Surface Microstructure ◽  
Membrane Structures ◽  
Engineering Applications ◽  
Design Qualification ◽  
Coated Fabrics

Material degradation has marked impact on the long-term properties and service life of membrane structures. This study is aimed at assessing and understanding the deterioration in visual aspect, surface microstructure, and mechanical properties of a polyvinylidene fluoride (PVDF) polymer after engineering applications. Three groups of PVDF-coated fabrics were removed from different membrane structures in China, which have been used for 15, 16, and 19 years, respectively. Firstly, spectrocolorimetry tests were carried out to determine the evolution of chromaticity and lightness. Other methods such as contact angle and thickness measurements were used to characterize the physical properties. Then, surface morphology was observed by using scanning electron microscope (SEM) technology. Moreover, a series of uniaxial tensile tests and tearing tests were performed to obtain the mechanical indicators including uniaxial tensile strength, strain at break, tearing strength, and uniaxial elastic modulus. In order to further study the degradation mechanism, infrared spectroscopy was used to characterize the molecular structure of aged fabrics. Finally, Principal Component Analysis (PCA) provided a comprehensive description of correlations between surface microstructure, physical properties, and mechanical properties. This paper offers a further understanding of the design, qualification, and durability evaluation of membrane structures.

Mechanical properties of PVDF-coated fabric under tensile tests

2015 ◽  
Vol 35 (4) ◽  
pp. 377-390 ◽  
Author(s):  
Andrzej Ambroziak
Keyword(s):  
Mechanical Properties ◽  
Polyvinylidene Fluoride ◽  
Cyclic Load ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Uniaxial Tensile ◽  
Cyclic Tests ◽  
Comprehensive Investigation ◽  
Coated Fabric ◽  
Coated Fabrics

Abstract This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1 biaxial and the uniaxial tensile tests results is also given. Additionally, biaxial cyclic tests were performed to observe the change of immediate mechanical properties under cyclic load. The article is aimed as an introduction to a comprehensive investigation of the mechanical properties of coated fabrics.

scholarly journals Water Influence on the Uniaxial Tensile Behavior of Polytetrafluoroethylene-Coated Glass Fiber Fabric

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 846
Author(s):  
Hastia Asadi ◽  
Joerg Uhlemann ◽  
Natalie Stranghoener ◽  
Mathias Ulbricht
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Operation Time ◽  
Uniaxial Tensile ◽  
Membrane Structures ◽  
Strength Deterioration ◽  
Coated Glass ◽  
Reversible Loss ◽  
The Impact ◽  
Loss Of Strength

Polytetrafluoroethylene (PTFE)-coated glass fiber fabrics are used for long-lasting membrane structures due to their outstanding mechanical properties, chemical stabilities, and satisfying service life. During their operation time, different environmental impacts might influence their performance, especially regarding the mechanical properties. In this contribution, the impact of water on the tensile strength deterioration was assessed experimentally, providing evidence of considerable but partially reversible loss of strength by up to 20% among the various types of investigated industrially established fabrics.

Comprehensive study on mechanical properties of coated biaxial warp-knitted fabrics

2021 ◽  
pp. 073168442110204
Author(s):  
Bin Yang ◽  
Yingying Shang ◽  
Zeliang Yu ◽  
Minger Wu ◽  
Youji Tao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Failure Modes ◽  
Least Squares Method ◽  
Tensile Tests ◽  
Tensile Creep ◽  
Base Layer ◽  
Sustained Load ◽  
Uniaxial Tensile ◽  
Membrane Structures ◽  
Knitted Fabrics

In recent years, coated fabrics have become the major material used in membrane structures. Due to the special structure of base layer and mechanical properties, coated biaxial warp-knitted fabrics are increasingly applied in pneumatic structures. In this article, the mechanical properties of coated biaxial warp-knitted fabrics are investigated comprehensively. First, off-axial tensile tests are carried out in seven in-plane directions: 0°, 15°, 30°, 45°, 60°, 75°, and 90°. Based on the stress–strain relationship, tensile strengths are obtained and failure modes are studied. The adaptability of Tsai–Hill criterion is analyzed. Then, the uniaxial tensile creep test is performed under 24-h sustained load and the creep elongation is calculated. Besides, tearing strengths in warp and weft directions are obtained by tearing tests. Finally, the biaxial tensile tests under five different load ratios of 1:1, 2:1, 1:2, 1:0, and 0:1 are carried out, and the elastic constants and Poisson’s ratio are calculated using the least squares method based on linear orthotropic assumption. Moreover, biaxial specimens under four load ratios of 3:1, 1:3, 5:1, and 1:5 are further tensile tested to verify the adaptability of linear orthotropic model. These experimental data offer a deeper and comprehensive understanding of mechanical properties of coated biaxial warp-knitted fabrics and could be conveniently adopted in structural design.

Advances in mechanical properties of coated fabrics in civil engineering

2016 ◽  
Vol 48 (1) ◽  
pp. 255-271 ◽  
Author(s):  
Zhang Yingying ◽  
Xu Junhao ◽  
Zhang Qilin
Keyword(s):  
Mechanical Properties ◽  
Mechanical Behavior ◽  
Civil Engineering ◽  
Constitutive Relations ◽  
Test Methods ◽  
Future Trends ◽  
Spatial Structures ◽  
Membrane Structures ◽  
Coated Fabrics ◽  
Important Basis

Membrane structures are widely used in large span spatial structures due to excellent mechanical behavior and beautiful forms. Mechanical properties of coated fabrics are an important basis of design, analysis, and construction of membrane structures. This paper gives an overview of the research advances in mechanical properties of coated fabrics. First, the basic mechanical indexes of coated fabrics and corresponding test methods are presented. Then, the existing constitutive relations for coated fabrics are discussed. Finally, the effect of environment and other factors on the mechanical properties of coated fabrics are studied. In addition, the future trends on the mechanical behavior of coated fabrics are given, which can be references for design and analysis of coated fabrics in civil engineering.

scholarly journals Comprehensive Analysis of Mechanical Properties of CB/SiO2/PVDF Composites

Polymers ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 146
Author(s):  
Fangyun Kong ◽  
Mengzhou Chang ◽  
Zhenqing Wang
Keyword(s):  
Mechanical Properties ◽  
Silicon Dioxide ◽  
Polyvinylidene Fluoride ◽  
Energy Dispersive Spectrometry ◽  
Comprehensive Analysis ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Notch Angle ◽  
Mixing Method ◽  
Pvdf Matrix

Damage is a key problem that limits the application of polymer membranes. In this paper, conductive carbon black (CB) and silicon dioxide (SiO2)-reinforced polyvinylidene fluoride (PVDF) composites were prepared using a solution mixing method. Through a uniaxial tensile test, the fracture and damage characteristics of the material were analyzed. When the structure had inevitable notch damage, changing the notch angle was very helpful for the material to bear more load. In addition, when there were two kinds of fillers in the PVDF matrix at the same time, there was an interaction between particles. The microstructure of the composite was characterized by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), and thermogravimetric (TG) analysis. The experimental results indicate that, when the ratio of CB:SiO2:PVDF was 1:4:95, the general mechanical properties of the composite were the best.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

ALUMINUM 2011

Alloy Digest ◽  
1978 ◽  
Vol 27 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Screw Machine ◽  
Aluminum Copper Alloy

Abstract ALUMINUM 2011 is an age-hardenable aluminum-copper alloy to which lead and bismuth are added to make it a free-machining alloy. It has good mechanical properties and was designed primarily for the manufacture of screw-machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-32. Producer or source: Various aluminum companies. Originally published October 1955, revised December 1978.

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

REYNOLDS 390 and A390

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Silicon Alloys ◽  
Aluminum Silicon Alloys ◽  
Temperature Performance

Abstract REYNOLDS 390 and A390 are hypereutectic aluminum-silicon alloys having excellent wear resistance coupled with good mechanical properties, high hardness, and low coefficients of expansion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-203. Producer or source: Reynolds Metals Company.

Sign in / Sign up

Export Citation Format

Share Document