scholarly journals Research on Novel Denoising Method of Variational Mode Decomposition in MEMS Gyroscope

2021 ◽  
Vol 21 (1) ◽  
pp. 19-24
Author(s):  
Xiaolei Wang ◽  
Huiliang Cao ◽  
Yuzhao Jiao ◽  
Taishan Lou ◽  
Guoqiang Ding ◽  
...  
Keyword(s):  
Resonant Frequency ◽  
Reduction Method ◽  
Noise Signal ◽  
Sampling Frequency ◽  
Variational Mode Decomposition ◽  
Denoising Method ◽  
Mems Gyroscope ◽  
Frequency Level ◽  
Mode Decomposition ◽  
Four Levels

Abstract The noise signal in the gyroscope is divided into four levels: sampling frequency level, device bandwidth frequency level, resonant frequency level, and carrier frequency level. In this paper, the signal in the dual-mass MEMS gyroscope is analyzed. Based on the variational mode decomposition (VMD) algorithm, a novel dual-mass MEMS gyroscope noise reduction method is proposed. The VMD method with different four-level center frequencies is used to process the original output signal of the MEMS gyroscope, and the results are analyzed by the Allan analysis of variance, which shows that the ARW of the gyroscope is increased from 1.998*10−1°/√h to 1.552*10−4°/√h, BS increased from 2.5261°/h to 0.0093°/h.

scholarly journals Crow Search Algorithm for MEMS Gyroscope Temperature Drift Signal and Processing for Denoising

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Xichen Wang ◽  
Huiliang Cao ◽  
Xiaomin Duan
Keyword(s):  
Search Algorithm ◽  
Noise Signal ◽  
Sample Entropy ◽  
Least Square ◽  
Effect Of Temperature ◽  
Support Vector ◽  
Variational Mode Decomposition ◽  
Temperature Drift ◽  
Mems Gyroscope ◽  
Mode Decomposition

To solve the problem of micro-electro-mechanical system (MEMS) gyroscope noise, this paper presents a variational mode decomposition (VMD) method based on crow search algorithm. First, the signal was decomposed by variational mode decomposition for optimization of crow search algorithm (CSA-VMD) method. The parameters required by the VMD method (penalty parameter α and decomposition number K) are given by the crow search algorithm, and then the signal is decomposed into the superposition of multiple subsignals, called intrinsic mode functions (IMFs). The sample entropy (SE) corresponding to each IMF is then obtained. By calculating the sample entropy, the noise signal can be divided into pure noise part, mixing part, and temperature drift part. Second, Savitzky–Golay smoothing denoising (SG) is used to filter the mixed noise signal to eliminate the influence of noise. Third, for the filtering of the drift part, the least square support vector machine optimized by the crow search algorithm (CSA-LSSVM) was used to filter, so as to reduce the effect of temperature drift. Finally, the processed signal is reconstructed to achieve the goal of denoising. Through the results, it can be found that the optimized VMD and LSSVM using CSA algorithm can achieve more effective denoising. After using the method proposed in this paper, the angular random walk value is 1.1175    ∗  10−4°/h/√Hz, and the bias stability is 0.0017°/h. Compared with the original signal, the two signals are optimized by 98.1% and 98.2%, respectively. It can be seen from the experimental results that the proposed CSA-VMD method, SG method, and CSA-LSSVM method can effectively eliminate noise effects.

scholarly journals A Denoising Method of Ship Radiated Noise Signal Based on Modified CEEMDAN, Dispersion Entropy, and Interval Thresholding

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 597 ◽  
Author(s):  
Guohui Li ◽  
Zhichao Yang ◽  
Hong Yang
Keyword(s):  
Signal To Noise Ratio ◽  
Noise Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Measurement Technology ◽  
Signal Denoising ◽  
Frequency Noise ◽  
Denoising Method ◽  
Radiated Noise ◽  
Mode Decomposition ◽  
Adaptive Noise

Due to the non-linear and non-stationary characteristics of ship radiated noise (SR-N) signal, the traditional linear and frequency-domain denoising methods cannot be used for such signals. In this paper, an SR-N signal denoising method based on modified complete ensemble empirical mode decomposition (EMD) with adaptive noise (CEEMDAN), dispersion entropy (DE), and interval thresholding is proposed. The proposed denoising method has the following advantages: (1) as an improved version of CEEMDAN, modified CEEMDAN (MCEEMDAN) combines the advantages of EMD and CEEMDAN, and it is more reliable than CEEMDAN and has less consuming time; (2) as a fast complexity measurement technology, DE can effectively identify the type of intrinsic mode function (IMF); and (3) interval thresholding is used for SR-N signal denoising, which avoids loss of amplitude information compared with traditional denoising methods. Firstly, the original signal is decomposed into a series of IMFs using MCEEMDAN. According to the DE value of IMF, the modes are divided into three types: noise IMF, noise-dominated IMF and pure IMF. After noise IMFs are removed, the noise-dominated IMFs are denoised using interval thresholding. Finally, the pure IMF and the processed noise-dominated IMFs are reconstructed to obtain the final denoised signal. The denoising experiments with the Chen’s chaotic system show that the proposed method has a higher signal-to-noise ratio (SNR) than the other three methods. Applying the proposed method to denoise the real SR-N signal, the topological structure of chaotic attractor can be recovered clearly. It is proved that the proposed method can effectively suppress the high-frequency noise of SR-N signal.

Operation feature extraction of flood discharge structure based on improved variational mode decomposition and variance dedication rate

2019 ◽  
Vol 26 (3-4) ◽  
pp. 229-240
Author(s):  
Jianwei Zhang ◽  
Ge Hou ◽  
Han Wang ◽  
Yu Zhao ◽  
Jinlin Huang
Keyword(s):  
Feature Extraction ◽  
Empirical Mode Decomposition ◽  
Variational Mode Decomposition ◽  
Denoising Method ◽  
Flood Discharge ◽  
Mode Decomposition ◽  
Empirical Wavelet Transform ◽  
Discharge Structure ◽  
Operation Characteristic ◽  
Rate Method

Operation feature extraction of flood discharge structures under ambient excitation has attracted increasing attention in recent years. However, the vibration signal of flood discharge structures is a nonstationary random signal with low signal-to-noise ratio, which is mixed with lots of low-frequency water flow noise and high-frequency white noise. It is difficult to excavate the hidden vibration characteristic information accurately. To solve the problem, we propose a novel denoising method called improved variational mode decomposition. As an improved method of variational mode decomposition, improved variational mode decomposition can effectively determine the decomposition mode number of variational mode decomposition by using the mutual information method. Furthermore, improved variational mode decomposition is combined with a variance dedication rate to extract the overall operation characteristic information of the structure. In order to evaluate the applicability and effectiveness of the proposed improved variational mode decomposition–variance dedication rate method, we compare the denoising results of simulation signals produced by an improved variational mode decomposition–variance dedication rate with those produced by digital filter, wavelet threshold, empirical mode decomposition, empirical wavelet transform, complete ensemble empirical mode decomposition with adaptive noise, and improved variational mode decomposition methods and find a better performance of the improved variational mode decomposition–variance dedication rate method. In addition, the proposed method is applied to the Three Gorges Dam, and the results show that the improved variational mode decomposition–variance dedication rate method can effectively remove heavy background noises and extract the operation characteristic information of the flood discharge structure, which contributes to health monitoring and damage identification of the flood discharge structure.

scholarly journals Denoising of the Fiber Bragg Grating Deformation Spectrum Signal Using Variational Mode Decomposition Combined with Wavelet Thresholding

2019 ◽  
Vol 9 (1) ◽  
pp. 180 ◽  
Author(s):  
Weifang Zhang ◽  
Meng Zhang ◽  
Yan Zhao ◽  
Bo Jin ◽  
Wei Dai
Keyword(s):  
Discrete Wavelet ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Denoising Method ◽  
Mode Decomposition ◽  
Noisy Signals ◽  
Band Limited ◽  
Adaptive Signal Decomposition ◽  
Adaptive Signal ◽  
The Impact

Damage detection using an FBG sensor is a critical process for an assessment of any inspection technology classified as structural health monitoring (SHM). FBG signals containing noise in experiments are developed to detect flaws. In this paper, we propose a novel signal denoising method that combines variational mode decomposition (VMD) and changed thresholding wavelets to denoise experimental and mixed signals. VMD is a recently introduced adaptive signal decomposition algorithm. Compared with traditional empirical mode decomposition (EMD), and it is well founded theoretically and more robust to noise samples. First, input signals were broken down into a given number of K band-limited intrinsic mode functions (BLIMFs) by VMD. For the purpose of avoiding the impact of overbinning or underbinning on VMD denoising, the mixed signals, which were obtained by adding different signal/noise ratio (SNR) noises to the experimental signals, were designed to select the best decomposition number K and data-fidelity constraint parameter α. After that, the realistic experimental signals were processed using four denoising algorithms to evaluate denoising performance. The results show that, upon adding additional noisy signals and realistic signals, the proposed algorithm delivers excellent performance over the EMD-based denoising method and discrete wavelet transform filtering.

scholarly journals Three-Component Microseismic Data Denoising Based on Re-Constrain Variational Mode Decomposition

2021 ◽  
Vol 11 (22) ◽  
pp. 10943
Author(s):  
Zhili Chen ◽  
Peng Wang ◽  
Zhixian Gui ◽  
Qinghui Mao
Keyword(s):  
Signal To Noise Ratio ◽  
Solution Process ◽  
Vertical Component ◽  
Microseismic Monitoring ◽  
Center Frequency ◽  
Variational Mode Decomposition ◽  
Denoising Method ◽  
Microseismic Data ◽  
Mode Decomposition ◽  
Processing Step

Microseismic monitoring is an important technology used to evaluate hydraulic fracturing, and denoising is a crucial processing step. Analyses of the characteristics of acquired three-component microseismic data have indicated that the vertical component has a higher signal-to-noise ratio (SNR) than the two horizontal components. Therefore, we propose a new denoising method for three-component microseismic data using re-constrain variational mode decomposition (VMD). In this method, it is assumed that there is a linear relationship between the modes with the same center frequency among the VMD results of the three-component data. Then, the decomposition result of the vertical component is used as a constraint to the whole denoising effect of the three-component data. On the basis of VMD, we add a constraint condition to form the re-constrain VMD, and deduce the corresponding solution process. According to the synthesis data analysis, the proposed method can not only improve the SNR level of three-component records, it also improves the accuracy of polarization analysis. The proposed method also achieved a satisfactory effect for field data.

scholarly journals A Denoising Method for Fiber Optic Gyroscope Based on Variational Mode Decomposition and Beetle Swarm Antenna Search Algorithm

Entropy ◽  
2020 ◽  
Vol 22 (7) ◽  
pp. 765
Author(s):  
Pengfei Wang ◽  
Yanbin Gao ◽  
Menghao Wu ◽  
Fan Zhang ◽  
Guangchun Li ◽  
...  
Keyword(s):  
Noise Reduction ◽  
Fiber Optic ◽  
Search Algorithm ◽  
Permutation Entropy ◽  
Navigation Systems ◽  
Variational Mode Decomposition ◽  
Fiber Optic Gyroscope ◽  
Denoising Method ◽  
Mode Decomposition ◽  
Penalty Factor

Fiber optic gyroscope (FOG) is one of the important components of Inertial Navigation Systems (INS). In order to improve the accuracy of the INS, it is necessary to suppress the random error of the FOG signal. In this paper, a variational mode decomposition (VMD) denoising method based on beetle swarm antenna search (BSAS) algorithm is proposed to reduce the noise in FOG signal. Firstly, the BSAS algorithm is introduced in detail. Then, the permutation entropy of the band-limited intrinsic mode functions (BLIMFs) is taken as the optimization index, and two key parameters of VMD algorithm, including decomposition mode number K and quadratic penalty factor α , are optimized by using the BSAS algorithm. Next, a new method based on Hausdorff distance (HD) between the probability density function (PDF) of all BLIMFs and that of the original signal is proposed in this paper to determine the relevant modes. Finally, the selected BLIMF components are reconstructed to get the denoised signal. In addition, the simulation results show that the proposed scheme is better than the existing schemes in terms of noise reduction performance. Two experiments further demonstrate the priority of the proposed scheme in the FOG noise reduction compared with other schemes.

scholarly journals Noise Suppression of Microseismic Signals via Adaptive Variational Mode Decomposition and Akaike Information Criterion

2020 ◽  
Vol 10 (11) ◽  
pp. 3790 ◽  
Author(s):  
Jinyong Zhang ◽  
Linlu Dong ◽  
Nuwen Xu
Keyword(s):  
Empirical Mode Decomposition ◽  
Akaike Information Criterion ◽  
Noise Suppression ◽  
Information Criterion ◽  
Ensemble Empirical Mode Decomposition ◽  
Frequency Noise ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Denoising Method ◽  
Mode Decomposition

Microseismic (MS) signals recorded by sensors are often mixed with various noise, which produce some interference to the further analysis of the collected data. One problem of many existing noise suppression methods is to deal with noisy signals in a unified strategy, which results in low-frequency noise in the non-microseismic section remaining. Based on this, we have developed a novel MS denoising method combining variational mode decomposition (VMD) and Akaike information criterion (AIC). The method first applied VMD to decompose a signal into several limited-bandwidth intrinsic mode functions and adaptively determined the effective components by the difference of correlation coefficient. After reconstructing, the improved AIC method was used to determine the location of the valuable waveform, and the residual fluctuations in other positions were further removed. A synthetic wavelet signal and some synthetic MS signals with different signal-to-noise ratios (SNRs) were used to test its denoising effect with ensemble empirical mode decomposition (EEMD), complete ensemble empirical mode decomposition (CEEMD), and the VMD method. The experimental results depicted that the SNRs of the proposed method were obviously larger than that of other methods, and the waveform and spectrum became cleaner based on VMD. The processing results of the MS signal of Shuangjiangkou Hydropower Station also illustrated its good denoising ability and robust performance to signals with different characteristics.

Application of improved variational mode decomposition method based on two-dimensional sparrow search algorithm in natural gas pipeline leakage signal denoising

2021 ◽  
pp. 014233122110636
Author(s):  
Dongmei Wang ◽  
Lijuan Zhu ◽  
Jikang Yue ◽  
Jingyi Lu ◽  
Gongfa Li
Keyword(s):  
Search Algorithm ◽  
Signal To Noise Ratio ◽  
Decomposition Algorithm ◽  
Signal Denoising ◽  
Two Dimensional ◽  
Variational Mode Decomposition ◽  
Denoising Method ◽  
Mode Decomposition ◽  
Penalty Factor ◽  
Whale Optimization

To eliminate noise interference in pipeline leakage detection, a signal denoising method based on an improved variational mode decomposition algorithm is proposed. This work adopts a standard variational mode decomposition algorithm with decomposition level K and the penalty factor α. The improvements consist of using a two-dimensional sparrow search algorithm to find K and α. To verify the superiority of the sparrow search algorithm to find K and α, it is compared with three earlier studies. These studies used the firefly algorithm, particle swarm optimization, and whale optimization algorithm to perform the optimization. The main result of this study is to demonstrate that the variational mode decomposition improved by sparrow search algorithm gives a much improved signal-to-noise ratio compared to the other methods. In all other respects, the results are comparable.

scholarly journals Enhanced Partial Discharge Signal Denoising Using Dispersion Entropy Optimized Variational Mode Decomposition

Entropy ◽  
2021 ◽  
Vol 23 (12) ◽  
pp. 1567
Author(s):  
Ragavesh Dhandapani ◽  
Imene Mitiche ◽  
Scott McMeekin ◽  
Venkateswara Sarma Mallela ◽  
Gordon Morison
Keyword(s):  
Performance Metrics ◽  
Regularization Parameter ◽  
Signal To Noise Ratio ◽  
Partial Discharge ◽  
Sensor Data ◽  
Variational Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Denoising Method ◽  
Mode Decomposition ◽  
Band Limited

This paper presents a new approach for denoising Partial Discharge (PD) signals using a hybrid algorithm combining the adaptive decomposition technique with Entropy measures and Group-Sparse Total Variation (GSTV). Initially, the Empirical Mode Decomposition (EMD) technique is applied to decompose a noisy sensor data into the Intrinsic Mode Functions (IMFs), Mutual Information (MI) analysis between IMFs is carried out to set the mode length K. Then, the Variational Mode Decomposition (VMD) technique decomposes a noisy sensor data into K number of Band Limited IMFs (BLIMFs). The BLIMFs are separated as noise, noise-dominant, and signal-dominant BLIMFs by calculating the MI between BLIMFs. Eventually, the noise BLIMFs are discarded from further processing, noise-dominant BLIMFs are denoised using GSTV, and the signal BLIMFs are added to reconstruct the output signal. The regularization parameter λ for GSTV is automatically selected based on the values of Dispersion Entropy of the noise-dominant BLIMFs. The effectiveness of the proposed denoising method is evaluated in terms of performance metrics such as Signal-to-Noise Ratio, Root Mean Square Error, and Correlation Coefficient, which are are compared to EMD variants, and the results demonstrated that the proposed approach is able to effectively denoise the synthetic Blocks, Bumps, Doppler, Heavy Sine, PD pulses and real PD signals.

Sign in / Sign up

Export Citation Format

Share Document