Blockchain-Empowered Halal Fashion Traceability System in Indonesia

Author(s):  
Eli Sumarliah ◽  
Tieke Li ◽  
Bailin Wang ◽  
Fauziyah Fauziyah ◽  
Indriya Indriya

Incorporating blockchain into Halal traceability systems is developing in nature; the research aspires to examine the participation intent in blockchain-empowered Halal fashion traceability (BHFT) system via a joint framework that includes diffusion of innovation theory, institutional theory, and Halal-oriented approach. The study uses a simple random sampling method to collect the data from 165 Indonesian Halal fashion manufacturing companies. PLS-SEM is employed to examine the conceptual framework. Findings show that Halal-oriented approach significantly affects institutional pressures, while institutional pressures significantly affects perceived desirability, and perceived desirability significantly affects the participation intent. The companies operating an inclusive Halal-oriented approach will be more aware of the institutional pressures that expect them to partake in a BHFT. The paper enhances the existing literature in Halal supply chains, blockchain, operation management, and information systems via a cohesive framework and empirical insight.

2020 ◽  
Vol 25 (6) ◽  
pp. 863-879 ◽  
Author(s):  
Jun-Jie Hew ◽  
Lai-Wan Wong ◽  
Garry Wei-Han Tan ◽  
Keng-Boon Ooi ◽  
Binshan Lin

Purpose Given the emerging nature of integrating blockchain into food traceability systems, this study aims to investigate the intention to participate in a blockchain-based Halal traceability system through a united model that consists of Halal orientation strategy, institutional theory and diffusion of innovation theory. Design/methodology/approach A sample that consists of 143 Malaysian Halal food and beverage manufacturers was drawn from Halal Malaysia Official Portal using the simple random sampling technique. The responses were collected from the key managerial personnel with experience and knowledge on the Halal supply chain using phone interviews. Subsequently, the partial least squares structural equation modelling approach was then used to analyse the theoretical model. Findings The manufacturers would go through a chain of the process before deciding to participate in the traceability system. Firstly, the manufacturers which practice a comprehensive Halal orientation strategy will be more perceptive towards the institutional pressures that demand them to participate in a traceability system. Secondly, in response to the pressures, the manufacturers would evaluate the technological characteristics of the system and subsequently develop their perceived desirability. Thirdly, the manufacturers with favourable perceived desirability shall decide to participate in the system. Originality/value This study advances the current literature of Halal supply chain, information systems, operations management and blockchain through an integrated model that could explain 73.19% of the variance in intention to participate.


2020 ◽  
Vol 3 (4) ◽  
Author(s):  
Lauw Tjun Tjun ◽  
◽  
Regina Jansen Arsjah

This paper wants to investigate the impact of board control on social responsibility disclosure. The duration of this study covers three years, i.e., from 2014 until 2016. The population is from public manufacturing companies in Indonesia, and the samples are taken by a simple random sampling method. To analyze the data, the regression model gets used. This research concludes that a positive influence of the supervising board size and the woman portion in this board on the firm social responsibility disclosure is available. Also, business ethics positively affect it.


2019 ◽  
Vol 8 (1) ◽  
pp. 17-24
Author(s):  
Siti Suharni ◽  
Arini Wildaniyati ◽  
Dea Andreana

This study is aimed at examining the effects of the Number of Board of Commissioners, Leverage, Profitability, Capital Intensity, Cash Flow, and Company Size toward Conservatism in the manufacturing companies listed on the Indonesian Stock Exchange (IDX). The population used in this study is the yearly financial statements on firm of manufacturing listed at BEI period 2012-2017, using purposive sampling method. The type of data used is secondary data obtained from yerly financial reports published and downloaded through the official BEI website. Data analyzed with Descriptive statistics, test of classic assumption and exmination of hypothesis with multiple linier regression method. The result of hypothesis research shows variable Profitability and Cash Flow have a significant effect on the ability of Conservatism, while the Number of Board of Commissioners, Leverage, Capital Intensity, and Company Size has no effect on the ability of Conservatism.


MBIA ◽  
2019 ◽  
Vol 17 (2) ◽  
pp. 1-10
Author(s):  
Rolia Wahasusmiah

This study aims to determine the effect of financial performance and good corporate governance (GCG) on the value of companies in manufacturing companies listed on the stock exchange Indonesia. The type of data used is secondary data in the form of annual report 2016. Population used in this study are all companies listed on the Indonesia Stock Exchange (BEI). This research uses purposive sampling method with total population of 144 companies and sample of 31 companies. The results show that simultaneously ROA, OPM, NPM, KM, and KI have a positive influence on firm value. While partially ROA  have a positive influence on firm value. While OPM, NPM, KM, and KI have no positive influence on firm value).


Author(s):  
Fikret GÜMÜŞBUĞA

This study mainly focuses on customer care management and customer loyalty. Even though there are many experiential studies about customer care management and customer loyalty system, the lack of studies on customers in Karabük and Safranbolu locally, has leaded to focus on this study. Thus, this study mainly focuses on the influence of customer care treatments of banks in Karabük and Safranbolu on customer loyalty. Descriptive research type was used in the study. In this study simple random sampling method was used which is one of the probability sampling method, face to face surwey to all 726 participants was used for the study. As the result of the experiential study, the attendance and influence of customer care management and loyalty systems have been comparatively low, but it has been figured out that customer care management system influences customer loyalty level.


Author(s):  
Nyimas Ayu Dillashandy ◽  
Nurmala K Panjaitan

Mount Merapi eruption has occurred several times in Indonesia and the biggest eruption that last occurred in 2010. The community were suffered losses and were affected by eruptions. The purposes of this research are to analyze community resilience, to analyze the level of vulnerability, and to analize the community adaptive capacity. The research using a quantitative approach supported by qualitative data. Simple random sampling technique is used as the sampling method and the informant was taken purposively. The results of this research showed that when the eruption occurred the community has a high vulnerability. The adaptive capacity is also high with innovative learning based on institutional memory and supported by the connectedness. Communities achieve resilience and can adapt to changes with high adaptive capacity.  Keywords: adaptive capacity, community resilience, eruption, vulnerability ABSTRAK Erupsi Gunung Merapi sudah terjadi beberapa kali di Indonesia dan erupsi terbesar yang terjadi terakhir kalinya yaitu pada tahun 2010. Komunitas mengalami berbagai kerugian dan terkena dampak dari erupsi. Tujuan dari penelitian ini adalah untuk menganalisis resiliensi komunitas, menganalisis tingkat kerentanan komunitas, dan menganalisis kapasitas adaptasi komunitas. Penelitian ini dilaksanakan dengan menggunakan pendekatan kuantitatif yang didukung oleh data kualitatif. Pemilihan responden dilakukan dengan teknik sampel acak sederhana sedangkan pemilihan terhadap informan dilakukan secara sengaja. Hasil penelitian ini menunjukkan bahwa saat erupsi terjadi komunitas memiliki kerentanan yang tinggi. Kapasitas adaptasi komunitas tinggi dengan adanya innovative learning yang didasari oleh pengetahuan dan pengalaman dan didukung oleh jaringan yang dimiliki. Komunitas berhasil mencapai resiliensi dan dapat beradaptasi dengan perubahan-perubahan dengan kapasitas adaptasi yang tinggi.Kata kunci : kapasitas adaptasi, kerentanan, erupsi, resiliensi komunitas


2020 ◽  
Vol 21 (1) ◽  
pp. 61-70
Author(s):  
Toncerius M. Lesu ◽  
S.P.N. Nainiti ◽  
Serman Nikolaus

The aim of this research is to find out how big the role of the farmer group members in increasing rice production at Korobhera Village, Meggo Subdistrict, Sikka District. The research has been done on April to May 2019. This is a qualitative study with purposive sampling considering the site was one of rice central production. The objectives of the study were to know : 1) how big the role of the farmer group members to productivity increasing in the area of research ; 2) the constraints faced by the members of the farmer group. Sample was done randomly using simple random sampling method with a total sample size of 50 people, who were the members of four farmer groups existed. The results of research indicated that the role of farmer group members in increasing rice production at the location of research was high, shown by the percentage of the accomplishment maximum score from average score in the amount of 75,65% (average score 87). The constraints faced by members of farmer group were quite similar, which were financial capital limits problem, uncaged livestocks and the availability of production tools was often not on time.


2016 ◽  
Vol 1 (2) ◽  
pp. 183-190
Author(s):  
Dwi Urip Wardoyo

This study aims to determine the determination of the cost of production for products produced by PT. DWA. The Company is engaged in the manufacturing industry specialized in automotive components. Its activity is carried out through a series of production processes, so that expenses spent in the production will be calculated into the cost of the production sold. The population in this study were all manufacturing companies in Jakarta. Convenience sampling method selected one of the companies that get the confidence to assemble three national car project in Indonesia, namely Timor, Bakrie and Maleo. Test analysis used in this study is to test the calculation of full costing with job order costing. This study shows that (a) determination of the cost elements associated with the cost of production and (b) determining the cost of production on a product-based job costing with full costing approach. Keywords: cost of production, full costing


Author(s):  
Pupun Tri Wahyuni ◽  
Resti Yulistia Muslim

This research objective is to axamine empirically the influence of earnings management on earnings quality. The study motivated by the controversy of previous study about earnings management and earnings quality. Earnings management was measured by Discretionary Accrual and earnings quality was measured by Earnings Response Coefficient (ERC). The units were 128 (16x8) Quartal financial report in manufacturing companies listed in the Jakarta Stock Exchange, started from the year 2005 up to 2006. The data was collected using purposive sampling method. Statistical method used to test the hypotheses was multiple regressions. The result of the research showed that: the influence of earnings management on earnings quality was negative, sig 0.049. It means that the lower earnings management will be followed by higher earnings quality. This study supported the result of Fetham and Pae (2000), Nelson et al. (2000), Scott (2000), Lobo and Zhou (2001), also Teixeira (2002), Pudjiastuti (2006). 


Sign in / Sign up

Export Citation Format

Share Document