Faculty practice: advantages and disadvantages

1978 ◽  
Vol 42 (10) ◽  
pp. 576-578
Author(s):  
J Klooster
Keyword(s):  
Advantages And Disadvantages

Cryogenic atomic force microscopy

1991 ◽  
Vol 49 ◽  
pp. 54-55
Author(s):  
K. A. Fisher ◽  
M. G. L. Gustafsson ◽  
M. B. Shattuck ◽  
J. Clarke
Keyword(s):  
Room Temperature ◽  
Rapid Freezing ◽  
Cryogenic Temperatures ◽  
Soft Or ◽  
Electrically Conductive ◽  
Force Microscopy ◽  
Flexible Molecules ◽  
Advantages And Disadvantages ◽  
Atomic Force ◽  
Chemical Perturbation

The atomic force microscope (AFM) is capable of imaging electrically conductive and non-conductive surfaces at atomic resolution. When used to image biological samples, however, lateral resolution is often limited to nanometer levels, due primarily to AFM tip/sample interactions. Several approaches to immobilize and stabilize soft or flexible molecules for AFM have been examined, notably, tethering coating, and freezing. Although each approach has its advantages and disadvantages, rapid freezing techniques have the special advantage of avoiding chemical perturbation, and minimizing physical disruption of the sample. Scanning with an AFM at cryogenic temperatures has the potential to image frozen biomolecules at high resolution. We have constructed a force microscope capable of operating immersed in liquid n-pentane and have tested its performance at room temperature with carbon and metal-coated samples, and at 143° K with uncoated ferritin and purple membrane (PM).

A conduction-cooled stage for high-resolution Cryo-SEM

1992 ◽  
Vol 50 (2) ◽  
pp. 1282-1283
Author(s):  
John G. Sheehan
Keyword(s):  
High Resolution ◽  
Liquid Nitrogen ◽  
Mechanical Stability ◽  
Cooling System ◽  
Cold Trap ◽  
Nitrogen Gas ◽  
Particulate Suspensions ◽  
Advantages And Disadvantages ◽  
Convection Cooling ◽  
Styrene Butadiene

The goal is to examine with high resolution cryo-SEM aqueous particulate suspensions used in coatings for printable paper. A metal-coating chamber for cryo-preparation of such suspensions was described previously. Here, a new conduction-cooling system for the stage and cold-trap in an SEM specimen chamber is described. Its advantages and disadvantages are compared to a convection-cooling system made by Hexland (model CT1000A) and its mechanical stability is demonstrated by examining a sample of styrene-butadiene latex.In recent high resolution cryo-SEM, some stages are cooled by conduction, others by convection. In the latter, heat is convected from the specimen stage by cold nitrogen gas from a liquid-nitrogen cooled evaporative heat exchanger. The advantage is the fast cooling: the Hexland CT1000A cools the stage from ambient temperature to 88 K in about 20 min. However it consumes huge amounts of liquid-nitrogen and nitrogen gas: about 1 ℓ/h of liquid-nitrogen and 400 gm/h of nitrogen gas. Its liquid-nitrogen vessel must be re-filled at least every 40 min.

Computer simulations for the TEM bend contour technique

1996 ◽  
Vol 54 ◽  
pp. 134-135
Author(s):  
Vladimir Yu. Kolosov ◽  
Anders R. Thölén
Keyword(s):  
Computer Simulations ◽  
Real Space ◽  
Advantages And Disadvantages ◽  
Short Overview ◽  
Diffraction Contrast ◽  
Beam Method ◽  
Convergent Beam ◽  
Contour Technique

In this paper we give a short overview of two TEM applications utilizing the extinction bend contour technique (BC) giving the advantages and disadvantages; especially we consider two areas in which the BC technique remains unique. Special attention is given to an approach including computer simulations of TEM micrographs.BC patterns are often observed in TEM studies but are rarely exploited in a serious way. However, this type of diffraction contrast was one of the first to be used for analysis of imperfections in crystalline foils, but since then only some groups have utilized the BC technique. The most extensive studies were performed by Steeds, Eades and colleagues. They were the first to demonstrate the unique possibilities of the BC method and named it real space crystallography, which developed later into the somewhat similar but more powerful convergent beam method. Maybe, due to the difficulties in analysis, BCs have seldom been used in TEM, and then mainly to visualize different imperfections and transformations.

Instrumental Assessment in Cleft Palate Care

2013 ◽  
Vol 23 (2) ◽  
pp. 49-61 ◽  
Author(s):  
Jamie Perry ◽  
Graham Schenck
Keyword(s):  
Cleft Palate ◽  
New Developments ◽  
Perceptual Evaluation ◽  
Advantages And Disadvantages ◽  
Instrumental Assessment ◽  
Speech Language Pathologist ◽  
Hypernasal Speech ◽  
Perceptual Assessment ◽  
Velopharyngeal Function ◽  
And Function

Despite advances in surgical management, it is estimated that 20–30% of children with repaired cleft palate will continue to have hypernasal speech and require a second surgery to create normal velopharyngeal function (Bricknell, McFadden, & Curran, 2002; Härtel, Karsten, & Gundlach, 1994; McWilliams, 1990). A qualitative perceptual assessment by a speech-language pathologist is considered the most important step of the evaluation for children with resonance disorders (Peterson-Falzone, Hardin-Jones, & Karnell, 2010). Direct and indirect instrumental analyses should be used to confirm or validate the perceptual evaluation of an experienced speech-language pathologist (Paal, Reulbach, Strobel-Schwarthoff, Nkenke, & Schuster, 2005). The purpose of this article is to provide an overview of current instrumental assessment methods used in cleft palate care. Both direct and indirect instrumental procedures will be reviewed with descriptions of the advantages and disadvantages of each. Lastly, new developments for evaluating velopharyngeal structures and function will be provided.

Multidisciplinary management of vascular access for haemodialysis: from the preparation of the initial access to the treatment of stenosis and thrombosis

VASA ◽  
2011 ◽  
Vol 40 (3) ◽  
pp. 188-198 ◽  
Author(s):  
Reinhold ◽  
Haage ◽  
Hollenbeck ◽  
Mickley ◽  
Ranft
Keyword(s):  
Vascular Access ◽  
Central Venous ◽  
Advantages And Disadvantages ◽  
Multidisciplinary Study ◽  
First Results ◽  
Lower Complication ◽  
Lower Complication Rate ◽  
Access Problems ◽  
Arteriovenous Grafts ◽  
The Individual

In February 2008 a multidisciplinary study group was established in Germany to improve the treatment of patients with potential vascular access problems. As one of the first results of their work interdisciplinary recommendations for the management of vascular access were provided, from the creation of the initial access to the treatment of complications. As a rule the wrist arteriovenous fistula (AVF) is the access of choice due to its lower complication rate when compared to other types of access. The AVF should be created 3 months prior to the expected start of haemodialysis to allow for sufficient maturation. Second and third choice accesses are arteriovenous grafts (AVG) and central venous catheters (CVC). Ultrasound is a reliable tool for vessel selection before access creation, and also for the diagnosis of complications in AVF and grafts. Access stenosis and thrombosis can be treated surgically and interventionally. The comparison of both methods reveals advantages and disadvantages for each. The therapeutic decision should be based on the individual patients’ constitution, and also on the availability and experience of the involved specialists.

Advantages and Disadvantages of Office Surgery

1983 ◽  
Vol 10 (2) ◽  
pp. 309-312
Author(s):  
Gilbert P. Gradinger
Keyword(s):  
Advantages And Disadvantages
Sign in / Sign up

Export Citation Format

Share Document