Analysis and Optimization of SM and TES Hours of Central Receiver Concentrated Solar Thermal with Two-Tank Molten Salt Thermal Storage

Author(s):  
Hanane Ait Lahoussine Ouali ◽  
Benyounes Raillani ◽  
Samir Amraqui ◽  
Mohammed Amine Moussaoui ◽  
Abdelhamid Mezrhab ◽  
...  
2008 ◽  
Vol 130 (2) ◽  
Author(s):  
J. Ignacio Ortega ◽  
J. Ignacio Burgaleta ◽  
Félix M. Téllez

Of all the technologies being developed for solar thermal power generation, central receiver systems (CRSs) are able to work at the highest temperatures and to achieve higher efficiencies in electricity production. The combination of this concept and the choice of molten salts as the heat transfer fluid, in both the receiver and heat storage, enables solar collection to be decoupled from electricity generation better than water∕steam systems, yielding high capacity factors with solar-only or low hybridization ratios. These advantages, along with the benefits of Spanish legislation on solar energy, moved SENER to promote the 17MWe Solar TRES plant. It will be the first commercial CRS plant with molten-salt storage and will help consolidate this technology for future higher-capacity plants. This paper describes the basic concept developed in this demonstration project, reviewing the experience accumulated in the previous Solar TWO project, and present design innovations, as a consequence of the development work performed by SENER and CIEMAT and of the technical conditions imposed by Spanish legislation on solar thermal power generation.


2016 ◽  
Vol 99 ◽  
pp. 852-866 ◽  
Author(s):  
Cristina Prieto ◽  
Rafael Osuna ◽  
A. Inés Fernández ◽  
Luisa F. Cabeza

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
T. O. Dunlop ◽  
D. J. Jarvis ◽  
W. E. Voice ◽  
J. H. Sullivan

2017 ◽  
Vol 4 ◽  
pp. 46-58
Author(s):  
Jonathan Kotyla

The growing concern over nonrenewable fuel sources, coupled with the continued increase of global energy demand has incentivised research into numerous new and pre-existing renewable energy sources. Concentrated solar thermal (CST) takes advantage of the high heat capacity of molten salts to provide an alternative solar solution to photovoltaic cells that allows reduced downtime through heat storage for use during suboptimal conditions. This meta-study examines the effectiveness of various eutectic Molten Salt compositions and materials as thermo-physical augmenters, with a focus on improved thermal conductivity when composited with molten salts as a method of enhancing the efficiency of concentrated solar thermal storage technology. The study is based on literature retrieved from scientific databases to investigate information available about enhancing LHTES technology. Research into carbon composites such as Expanded Graphite (EG) exhibits promising results revealing thermal conductivity increases as high as 40% in eutectic salt materials, however inconsistencies in measurements and materials used reveal a need for a greater analysis. Although molten salt thermal storage systems are not optimal in their current state, indication was found that composite storage mediums could potentially solidify their spot as a viable renewable energy source.


2013 ◽  
Vol 805-806 ◽  
pp. 63-69 ◽  
Author(s):  
Di Wu ◽  
Shi Liu

Solar thermal power generation technology is the most feasible technology to compete with fossil fuels in the economy, and is considered to be one of the most promising candidates for providing a major share of the clean and renewable energy needed in the future. The appropriate heat transfer fluid and storage medium is a key technological issue for the future success of solar thermal technologies. Molten salt is one of the best heat transfer and thermal storage fluid for both parabolic trough and tower solar thermal power system. It is very important that molten salt heat transfer mechanisms are understood and can be predicted with accuracy. But studies on molten salts heat transfer are rare. This study will lay a foundation for the application of carbon nanotubes in molten salt which can remarkably improve the stability and capacity of thermal storage. Thermal analysis methods and scanning electron microscope (SEM) are utilized to provide a review of thermophysical properties and thermochemical characteristics of the MWCNTs-salt composite materials.


2013 ◽  
Vol 827 ◽  
pp. 176-180 ◽  
Author(s):  
Di Wu ◽  
Shi Liu

Concentrated solar thermal power generation is becoming a very attractive renewable energy production system among all the different renewable options, as it has have a better potential for dispatchability. Thus, of all components, thermal storage is a key one. However, it is also one of the less developed. The appropriate heat transfer fluid and storage medium is a key technological issue for the future success of solar thermal technologies. Molten salt as the most promising thermal energy storage medium in large-scale industrial application, the method which can improve the thermal storage ability should be proposed. But studies on this area are rare.This study will lay a foundation for the application of gold nanoparticles in molten salt which can remarkably improve the thermodynamic property. Thermal analysis methods and scanning electron microscope (SEM) are utilized to provide a review of the gold-salt composite materials microstructure.


Sign in / Sign up

Export Citation Format

Share Document