Purpose. Experimental studies of the interaction of blast-furnace and steel-making slags with open pit waters during their direct contact and assessment of the volume of filling of the formed man-made cavities during mining of mineral deposits. Methods. Based on the analysis, the current low level of metallurgical slag and the lack of real and effective directions of their large-scale utilization were determined. The laboratory studies of the interaction of metallurgical slags with open pit water at a certain time of interaction, generally accepted methods for studying the chemical composition and concentration of substances in water, computer-aided design software packages and drawings to determine the volumes of the open pit mined-out area were used. Results. The dynamics of changes in the products of interactions of steel-smelting slags with open-pit waters at a certain ratio and period of interaction was investigated. It was found that the concentration of pollutants upon contact of water with steel-making slag changes according to polynomial dependences on the time of their interaction, decreasing by the 30th day, which eliminates the danger for the aquifer. The safest type of metallurgical slag was recommended for the formation of the bottom layer of the backfill massif. The volumes of the mined-out area of the open pit were determined in detail to assess the volumes of placement of the backfill material based on metallurgical slags. Scientific novelty. The safety of the contact of backfill materials based on steelmaking slags with open pit water was scientifically proven, which is confirmed by the established polynomial patterns of changes in concentrations and pollutants from the ratio and time of interaction. Practical significance. The formation of the backfill massif on the basis of blast-furnace dump and steel-smelting slags will allow achieving an environmental effect, such as their safe disposal as a reclamation of technologically disturbed lands by mining and restoration of the economic value of the land plot, as well as preventing the formation of new dumps.
The influence of technological parameters of smelting on the durability of the lining of an arc steel-smelting furnace under the conditions of Ural Steel JSC