scholarly journals Post-Variscan thermal history of the Intra-Sudetic Basin (Sudetes, Bohemian Massif) based on apatite fission track analysis

2019 ◽  
Vol 108 (8) ◽  
pp. 2561-2576 ◽  
Author(s):  
Dariusz Botor ◽  
Aneta A. Anczkiewicz ◽  
Stanisław Mazur ◽  
Tomasz Siwecki
Keyword(s):  
Standard Deviation ◽  
Late Cretaceous ◽  
Bohemian Massif ◽  
Fission Track ◽  
Thermal Evolution ◽  
Vitrinite Reflectance ◽  
Length Distribution ◽  
Track Length ◽  
Second Phase ◽  
Apatite Fission Track

Abstract The Intra-Sudetic Basin, a ~ 12 km deep Variscan intramontane basin, has the best preserved post-orogenic sedimentary record available at the NE margin of the Bohemian Massif. Apatite fission track (AFT) analyses have been performed on 16 sedimentary and volcanic samples of Carboniferous to Cretaceous age from the Intra-Sudetic Basin to improve understanding of the post-Variscan thermal evolution. AFT central ages range from 50.1 ± 8.8 to 89.1 ± 7.1 Ma (Early Eocene to Coniacian), with 13 of them being Late Cretaceous. The mean track length values range from 12.5 ± 0.4 to 13.8 ± 0.5 (except for one sample 14.4 ± 0.2) µm. This relatively short mean track length together with the unimodal track length distributions and rather low standard deviation (0.8 to 1.7 µm) in most samples indicate a long stay in the partial annealing zone during slow cooling. However, in the northern part of the Intra-Sudetic Basin, samples show a wider track length distribution (standard deviation of 1.8 to 2.1 µm) that could indicate a more complex thermal evolution possibly related to Mesozoic reheating. Vitrinite reflectance data combined with thermal models based on the AFT results indicate that the Carboniferous strata reached maximum palaeotemperatures in the latest Carboniferous to Early Permian time, corresponding to a major coalification event. The second phase of temperature rise occurred due to Late Mesozoic sedimentary burial, but it had no influence on maturation of the Carboniferous organic matter. Final cooling phase in the Late Cretaceous–Paleogene was related to tectonic inversion of the Intra-Sudetic Basin, which occurred after deposition of a significant thickness of Cenomanian–Turonian sediments. Thermal modelling demonstrates that ~ 4 km thick cover of Upper Cretaceous sediments is required to obtain a good match between our AFT data and modelled time–temperature paths. This outcome supports a significant amount of Late Cretaceous–Paleogene inversion within the Variscan belt of Central Europe.

Post-Paleocene cooling in the southern Canadian Atlantic region: evidence from apatite fission track models

2003 ◽  
Vol 40 (9) ◽  
pp. 1279-1297 ◽  
Author(s):  
Alexander M Grist ◽  
Marcos Zentilli
Keyword(s):  
Nova Scotia ◽  
Late Cretaceous ◽  
Prince Edward Island ◽  
Fission Track ◽  
Thermal Evolution ◽  
Vitrinite Reflectance ◽  
Traditional View ◽  
Combined Effects ◽  
Apatite Fission Track ◽  
Surface Temperatures

The traditional view of the geomorphic evolution of the southern Canadian Atlantic margin is one of gradual exhumation and peneplanation following Triassic–Jurassic rifting. Thermal modelling of apatite fission track data from pre-Carboniferous granitic basement in Nova Scotia and from Permian and Triassic sandstones from Nova Scotia, New Brunswick, and Prince Edward Island suggest a more complex thermal evolution of the onshore part of the margin. Models clearly indicate significantly elevated regional paleotemperatures during Jurassic time, and as much as 30 °C of post-Paleocene cooling. Model-predicted paleogeothermal gradients for granitic samples from the Digby D-1 well are normal, ranging from 15 to 20 °C/km. Post-Paleocene cooling may be attributable to the combined effects of 13 °C of exhumational cooling from erosion of approximately 700 m of post-Aptian sediments caused by decreased eustatic sea levels, and 8–17 °C of cooling from the propagation to depth of a 10–20 °C decrease in paleo-mean annual surface temperatures between Late Cretaceous time and the present. The combined effects of burial heating related to increased eustatic sea level and the propagation to depth of higher paleo-mean annual surface temperatures in the Late Cretaceous may also explain elevated vitrinite reflectance levels in Cretaceous lignites and in Jurassic strata in the Fundy Basin of Nova Scotia. These models demonstrate that the traditional view of passive peneplanation and slow exhumation of the margin since Early Jurassic time is not tenable.

The Tectonic and Uplift History of the Kuruketage Area in the North-East Edge of the Tarim Basin, China: Constraints from Detrital Zircon and Apatite Fission Track Data

2013 ◽  
Vol 330 ◽  
pp. 1067-1070
Author(s):  
Hui Xiao ◽  
Wei Han ◽  
Feng Guo
Keyword(s):  
Late Cretaceous ◽  
Tarim Basin ◽  
Fission Track ◽  
Vitrinite Reflectance ◽  
Early Paleozoic ◽  
Apatite Fission Track ◽  
North East ◽  
Zircon Fission Track ◽  
History Of ◽  
Uplift History

This study uses the application of zircon fission track (ZFT) and apatite fission track (AFT) thermochronometry technique to investigate the tectonic and uplift history of the Kuruketage area, north-east edge of the Tarim Basin. Based on measured ZFT, AFT and equivalent vitrinite reflectance measurements of samples in sedimentary rocks in Kuruketage area, the temperature time evolution history from early Paleozoic strata was modeled. The results show that the youngest peaks of ZFT at 371-392Ma and 328 - 305.7Ma record Hercynian tectonic and uplift event; the AFT peaks at 134.5 - 164Ma, 73 - 100Ma and 35.4Ma mainly represent the Late-Cretaceous tectonic and uplift event in Kuruketage area. The AFT thermal modeling results from the early Paleozoic strata indicate that the maximum paleo-temperature (at 140 215°C) experienced in late Silurian to early Devonian, and the strata temperature decreased to about 120°C before the Late-Cretaceous.

scholarly journals New Apatite Fission-Track Data from the Murmansk Craton, NE Fennoscandia: An Echo of Hidden Thermotectonic Events

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1095
Author(s):  
Roman V. Veselovskiy ◽  
Róbert Arató ◽  
Tanya E. Bagdasaryan ◽  
Alexander V. Samsonov ◽  
Alexandra V. Stepanova ◽  
...  
Keyword(s):  
Kola Peninsula ◽  
Fission Track ◽  
Thermal Evolution ◽  
Age Distribution ◽  
Track Length ◽  
Temperature History ◽  
Thermal Resistivity ◽  
Apatite Fission Track ◽  
Thermal Event ◽  
History Of

For a long time, the thermal history of northeastern (NE) Fennoscandia in the Phanerozoic and Precambrian remained unknown, since no thermochronological studies were carried out within the Kola Peninsula area. Two years ago, we developed the first model of tectono-thermal evolution of the Kola Peninsula territory for the last 1.9 Gyr using a set of newly obtained apatite fission-track (AFT) and Ar/Ar thermochronological data. However, the low-temperature history of the most ancient tectonic unit of the northeastern part of the Kola Peninsula—the Archean Murmansk craton—remained poorly constrained due to the lack of AFT data. In this paper, we present the first results of AFT studies of 14 samples representing intrusive and metamorphic Precambrian rocks, located within the Murmansk craton of NE Fennoscandia. AFT ages and track length distributions indicate a similar tectono-thermal evolution of Precambrian tectonic units in NE Fennoscandia over the last 300 Myr. The AFT ages are distributed between ca. 177 and ca. 384 Ma; their median value, ~293 Ma, confirms the presence of a previously identified hidden thermal event that took place at about 300 Ma. However, a detailed analysis of the AFT age distribution shows the presence of three statistically distinguishable age components: 180–190 Ma (C1), 290–320 Ma (C2) and 422 Ma (C3). We assume that the relatively young AFT ages of C1 may originate from apatite crystals with low thermal resistivity. Remarkably, this value coincides with the initial stage of the Barents Sea magmatic province activity during large-scale plume-lithospheric interaction, as well as with the assumed age of an enigmatic remagnetization event throughout the Kola Peninsula. C2 ages can be observed in both the gabbroic and non-gabbroic samples, whereas C3 ages can only be found in gabbro. It is supposed that C2 ages, similarly to the Central Kola terrane, correspond to a cooling event related to the denudation of a thick sedimentary cover, representing a continuation of the Caledonian foreland basin towards NE Fennoscandia. C3 ages may be associated with a thermal event corresponding to the Caledonian collisional orogeny.

Thermal history modelling of the western margin of the Bohemian Massif using high-resolution apatite fission-track thermochronology

2020 ◽  
Author(s):  
Lucie Novakova ◽  
Raymond Jonckheere ◽  
Bastian Wauschkuhn ◽  
Lothar Ratchbacher
Keyword(s):  
High Resolution ◽  
Bohemian Massif ◽  
Thermal History ◽  
Fission Track ◽  
Track Length ◽  
Apatite Fission Track ◽  
Fission Track Thermochronology ◽  
Length Measurements ◽  
Thermal Histories ◽  
Fission Track Ages

<p>The Naab area is situated on the western border of the Bohemian Massif, 60 km south of the KTB (Kontinentalen Tiefbohrung). The main super-deep borehole of the KTB reached a depth of 9,101 meters in the Earth's continental crust. The fission-track data for the KTB and the Naab area present contrasting signatures. The apatite fission-track ages in the upper section of the KTB borehole and surrounding area are in the range 50-70 Ma (Wagner et al., 1994; Wauschkuhn et al., 2015). The apatite fission-track ages of the Naab basement are older than those of the KTB area, and span a broader range: 120-200 Ma (Vercoutere, 1994). The distributions of the confined-track lengths range from unimodal over skewed and mixed to bimodal, with mean lengths in the range 11-13 µm. In broad terms, this can be interpreted as that the Naab samples contain both an older and younger (in particular pre- and post-late Cretaceous) fission-track population. The aim of our research is to investigate the applicability of lab-based models to geological data, using improved measurement techniques.</p><p>We studied eighteen samples dated by Vercoutere (1994) from the Palaeozoic basement and seven large rock samples from the Rotliegend strata north of the Luhe fault.  We intend to extend the confined-track length measurements of Vercoutere (1994), aiming to achieve higher resolution through methodological innovations made possible by computer-controlled motorized microscopes. Improved statistics increase the resolution of the modelled thermal histories, which permits to better distinguish systematic from statistical differences between the modelled palaeotemperatures and geological estimates. Experiments have shown that the rate of length increase permits to distinguish older from younger tracks (Jonckheere et al., 2017). This allows us to distinguish between tracks formed before and after the Late Cre­taceous to Palaeocene exhumation. The etch rate of a confined track is also an indicator of its individual thermal history, supplementing the information gleaned from its etchable length under fixed conditions. We compiled a comprehensive, high-resolution confined-track-length dataset. The Naab thermal histories were determined using modern modelling algorithms, implementing the most recent empirical equations.</p><p><strong>References</strong></p><p>Jonckheere R., Tamer M., Wauschkuhn F., Wauschkuhn B., Ratschbacher L., 2017. Single-track length measurements of step-etched fission tracks in Durango apatite: Vorsprung durch Technik.American Mineralogist 102, 987-996.</p><p>Vercoutere C., 1994. The thermotectonic history of the Brabant Massif (Belgium) and the Naab Basement (Germany):   an apatite fission track analysis. Ph. D. thesis, Universiteit Gent, pp. 191.</p><p>Wagner G.A., Hejl E., Van Den Haute P., 1994. The KTB fission-track project: Methodical aspects and geological implications. Radiation Measurements 23, 95-101.</p><p>Wauschkuhn B., Jonckheere R., Ratschbacher L., 2015. The KTB apatite fission-track profiles: building on a firm foundation? Geochimica et Cosmochimica Acta 167, 27-62.</p>

scholarly journals Burial and Exhumation History of the Lujing Uranium Ore Field, Zhuguangshan Complex, South China: Evidence from Low-Temperature Thermochronology

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 116
Author(s):  
Yue Sun ◽  
Barry P. Kohn ◽  
Samuel C. Boone ◽  
Dongsheng Wang ◽  
Kaixing Wang
Keyword(s):  
Early Cretaceous ◽  
Late Cretaceous ◽  
South China ◽  
Thermal History ◽  
Fission Track ◽  
Thermal Evolution ◽  
Negative Relationship ◽  
The Tibetan Plateau ◽  
Uranium Ore ◽  
Production Area

The Zhuguangshan complex hosts the main uranium production area in South China. We report (U-Th)/He and fission track thermochronological data from Triassic–Jurassic mineralized and non-mineralized granites and overlying Cambrian and Cretaceous sandstone units from the Lujing uranium ore field (LUOF) to constrain the upper crustal tectono-thermal evolution of the central Zhuguangshan complex. Two Cambrian sandstones yield reproducible zircon (U-Th)/He (ZHe) ages of 133–106 Ma and low effective uranium (eU) content (270–776 ppm). One Upper Cretaceous sandstone and seven Mesozoic granites are characterized by significant variability in ZHe ages (154–83 Ma and 167–36 Ma, respectively), which show a negative relationship with eU content (244–1098 ppm and 402–4615 ppm), suggesting that the observed age dispersion can be attributed to the effect of radiation damage accumulation on 4He diffusion. Correspondence between ZHe ages from sandstones and granites indicates that surrounding sedimentary rocks and igneous intrusions supplied sediment to the Cretaceous–Paleogene Fengzhou Basin lying adjacent to the LUOF. The concordance of apatite fission track (AFT) central ages (61–54 Ma) and unimodal distributions of confined track lengths of five samples from different rock units suggest that both sandstone and granite samples experienced a similar cooling history throughout the entire apatite partial annealing zone (~110–60 °C). Apatite (U-Th-Sm)/He (AHe) ages from six non-mineralized samples range from 67 to 19 Ma, with no apparent correlation to eU content (2–78 ppm). Thermal history modeling of data suggests that the LUOF experienced relatively rapid Early Cretaceous cooling. In most samples, this was followed by the latest Early Cretaceous–Late Cretaceous reheating and subsequent latest Late Cretaceous–Recent cooling to surface temperatures. This history is considered as a response to the transmission of far-field stresses, involving alternating periods of regional compression and extension, related to paleo-Pacific plate subduction and subsequent rollback followed by Late Paleogene–Recent India–Asia collision and associated uplift and eastward extrusion of the Tibetan Plateau. Thermal history models are consistent with the Fengzhou Basin having been significantly more extensive in the Late Cretaceous–Early Paleogene, covering much of the LUOF. Uranium ore bodies which may have formed prior to the Late Cretaceous may have been eroded by as much as ~1.2 to 4.8 km during the latest Late Cretaceous–Recent denudation.

Some calculations relevant to thermal annealing of fission tracks in apatite

1988 ◽  
Vol 419 (1857) ◽  
pp. 305-321 ◽  
Keyword(s):  
Conditional Distribution ◽  
Fission Track ◽  
Length Distribution ◽  
Track Length ◽  
Apatite Crystal ◽  
Routine Practice ◽  
Fission Tracks ◽  
Line Segments ◽  
Segment Model ◽  
Arbitrary Plane

Calculations in stochastic geometry are applied to the geological problem of analysing the statistical distribution of fission tracks in an apatite crystal, when information is available only by plane sampling. The feature of particular interest is the effect of anisotropy, in the sense of dependence of track length on orientation. Using a realistic Poisson line-segment model, we obtain formulae for the density of line segments intersecting an arbitrary plane and for the length distributions of confined tracks, semi-tracks and projected semi-tracks in terms of the conditional distribution of length given orientation. These formulae are used to explain and quantify the effect of anisotropy seen in experimental data from fission track annealing studies. We argue that track orientations, in addition to lengths, carry potentially useful information. For confined tracks, we recommend that both length and angle to the c -axis be measured as routine practice. For projected semi-tracks, where it is much harder to extract useful information from the observed length distribution, the measurement of angle, in addition to length, may prove fruitful, particularly when confined tracks are scarce.

Sign in / Sign up

Export Citation Format

Share Document