A terahertz time-domain study on the estimation of opto-mechanical properties of pharmaceutical tablets using the Hashin–Shtrikman bounds for refractive index: a case study of microcrystalline cellulose and starch acetate compacts

2016 ◽  
Vol 23 (3) ◽  
pp. 502-509 ◽  
Author(s):  
Prince Bawuah ◽  
Kai-Erik Peiponen
2019 ◽  
Vol 629 ◽  
pp. A112 ◽  
Author(s):  
B. M. Giuliano ◽  
A. A. Gavdush ◽  
B. Müller ◽  
K. I. Zaytsev ◽  
T. Grassi ◽  
...  

Context. Reliable, directly measured optical properties of astrophysical ice analogues in the infrared and terahertz (THz) range are missing from the literature. These parameters are of great importance to model the dust continuum radiative transfer in dense and cold regions, where thick ice mantles are present, and are necessary for the interpretation of future observations planned in the far-infrared region. Aims. Coherent THz radiation allows for direct measurement of the complex dielectric function (refractive index) of astrophysically relevant ice species in the THz range. Methods. We recorded the time-domain waveforms and the frequency-domain spectra of reference samples of CO ice, deposited at a temperature of 28.5 K and annealed to 33 K at different thicknesses. We developed a new algorithm to reconstruct the real and imaginary parts of the refractive index from the time-domain THz data. Results. The complex refractive index in the wavelength range 1 mm–150 μm (0.3–2.0 THz) was determined for the studied ice samples, and this index was compared with available data found in the literature. Conclusions. The developed algorithm of reconstructing the real and imaginary parts of the refractive index from the time-domain THz data enables us, for the first time, to determine the optical properties of astrophysical ice analogues without using the Kramers–Kronig relations. The obtained data provide a benchmark to interpret the observational data from current ground-based facilities as well as future space telescope missions, and we used these data to estimate the opacities of the dust grains in presence of CO ice mantles.


1997 ◽  
Vol 12 (4) ◽  
pp. 1091-1101 ◽  
Author(s):  
Seunggu Kang ◽  
Hongy Lin ◽  
Delbert E. Day ◽  
James O. Stoffer

The dependence of the optical and mechanical properties of optically transparent polymethyl methacrylate (PMMA) composites on the annealing temperature of BK10 glass fibers was investigated. Annealing was used to modify the refractive index (R.I.) of the glass fiber so that it would more closely match that of PMMA. Annealing increased the refractive index of the fibers and narrowed the distribution of refractive index of the fibers, but lowered their mechanical strength so the mechanical properties of composites reinforced with annealed fibers were not as good as for composites containing as-pulled (chilled) glass fibers. The refractive index of as-pulled 17.1 μm diameter fibers (R.I. = 1.4907) increased to 1.4918 and 1.4948 after annealing at 350 °C to 500 °C for 1 h or 0.5 h, respectively. The refractive index of glass fibers annealed at 400 °C/1 h best matched that of PMMA at 589.3 nm and 25 °C, so the composite reinforced with those fibers had the highest optical transmission. Because annealed glass fibers had a more uniform refractive index than unannealed fibers, the composites made with annealed fibers had a higher optical transmission. The mechanical strength of annealed fiber/PMMA composites decreased as the fiber annealing temperature increased. A composite containing fibers annealed at 450 °C/1 h had a tensile strength 26% lower than that of a composite made with as-pulled fibers, but 73% higher than that for unreinforced PMMA. This decrease was avoided by treating annealed fibers with HF. Composites made with annealed and HF (10 vol. %)-treated (for 30 s) glass fibers had a tensile strength (∼200 MPa) equivalent to that of the composites made with as-pulled fibers. However, as the treatment time in HF increased, the tensile strength of the composites decreased because of a significant reduction in diameter of the glass fiber which reduced the volume percent fiber in the composite.


2019 ◽  
Vol 105 ◽  
pp. 123-132 ◽  
Author(s):  
Gelayol Golkarnarenji ◽  
Minoo Naebe ◽  
Khashayar Badii ◽  
Abbas S. Milani ◽  
Reza N. Jazar ◽  
...  

2018 ◽  
Vol 778 ◽  
pp. 28-32
Author(s):  
Muhammad Shahzad ◽  
Tanveer Manzoor ◽  
Qanita Tayyaba ◽  
Ammad Hussain Qureshi

Presented results report the findings of a case study carried out to determine the possible factors that lead to the twisting of tail rotor shaft. The structural materials of the shaft was evaluated in terms of microstructural analysis and mechanical properties to rule out any material fault. The SEM images showed that the localized fractures at twist ends occurred without any significant plastic deformation. Moreover, there was no evidence of fatigue. Such behavior suggests that twist occurred under impact / high strain rate loading. Such loading conditions are not possible during the event to ground hitting. The Ansys simulation confirmed that the observed twisting can increase the stress at localized point in excess of UTS and cause fracture.


Sign in / Sign up

Export Citation Format

Share Document