Direct pore scale numerical simulation of colloid transport and retention. Part I: Fluid flow velocity, colloid size, and pore structure effects

2020 ◽  
Vol 144 ◽  
pp. 103694
Author(s):  
Mandana Samari Kermani ◽  
Saeed Jafari ◽  
Mohammad Rahnama ◽  
Amir Raoof
2009 ◽  
Vol 56 (11) ◽  
pp. 2065-2074 ◽  
Author(s):  
J. Sarrazin ◽  
P. Rodier ◽  
M.K. Tivey ◽  
H. Singh ◽  
A. Schultz ◽  
...  

Author(s):  
Dwi Listriana Kusumastuti

Water, oil and gas inside the earth are stored in the pores of the reservoir rock. In the world of petroleum industry, calculation of volume of the oil that can be recovered from the reservoir is something important to do. This calculation involves the calculation of the velocity of fluid flow by utilizing the principles and formulas provided by the Fluid Dynamics. The formula is usually applied to the fluid flow passing through a well defined control volume, for example: cylinder, curved pipe, straight pipes with different diameters at the input and output, and so forth. However, because of reservoir rock, as the fluid flow medium, has a wide variety of possible forms of the control volumes, hence, calculation of the velocity of the fluid flow is becoming difficult as it would involve calculations of fluid flow velocity for each control volume. This difficulties is mainly caused by the fact that these control volumes, that existed in the rock, cannot be well defined. This paper will describe a method for calculating this fluid flow velocity of the control volume, which consists of a combination of laboratory measurements and the use of some theories in the Fluid Dynamics. This method has been proofed can be used for calculating fluid flow velocity as well as oil recovery in reservoir rocks, with fairly good accuration.


2013 ◽  
Vol 821-822 ◽  
pp. 1418-1421
Author(s):  
Tie Yan ◽  
Li Wang ◽  
Xiao Feng Sun ◽  
Jun Bo Qu

Drilling string lateral vibration is a severe damage,which is influenced by many complex factors. This paper makes a theoretical analysis of the drilling string lateral vibration frequency caused by drilling fluid flow velocity inside and outside the drilling string, which supplies some evidence for calculating rotation speed of rotary table and reduces the times of drill string resonance. The influence of drilling fluid flow velocity inside the drilling string on lateral vibration frequency is analyzed by Euler method. Besides,through the use of mechanical analysis method and the introduction of additional mass coefficient. A differential equation of drilling string lateral vibration with the consideration of drilling fluid flow velocity inside and outside the drilling string is built up, and a mathematical model of drilling string lateral vibration under the influence of drilling fluid flow velocity is obtained. Field applications indicate that this model is in agreement with the field condition. Key words: mass coefficient;differential equation; drilling fluid flow velocity; lateral vibration frequency;


Sign in / Sign up

Export Citation Format

Share Document