scholarly journals Experimental study of the gaseous and particulate matter emissions from a gas turbine combustor burning butyl butyrate and ethanol blends

2017 ◽  
Vol 195 ◽  
pp. 693-701 ◽  
Author(s):  
Longfei Chen ◽  
Zhichao Zhang ◽  
Yiji Lu ◽  
Chi Zhang ◽  
Xin Zhang ◽  
...  
Author(s):  
Tomohiro Asai ◽  
Hiromi Koizumi ◽  
Shohei Yoshida ◽  
Hiroshi Inoue

The present paper describes particulate-matter (PM) emissions from a model gas turbine combustor at atmospheric pressure, focusing on the effects fuel-nozzle configurations have on PM emissions. In this experiment, three types of fuel nozzles were employed: standard, annular, and multi-type. The annular and multi-type were designed as low-PM-emission fuel nozzles, based on our preliminary experimental results using the standard nozzle. Gas oil and fuel oil containing 0.2 wt% of carbon residue were used as the test fuels. The PM concentrations and particle-size distributions were measured with an electrical low-pressure impactor. The experimental results revealed that the PM concentrations for the annular and multi-type were dramatically reduced compared with that for the standard nozzle, demonstrating their PM-reducing effect. We found that the high-concentration regions seemed to be formed by soot aggregation, from the spatial-profile measurements of PM emissions from gas oil combustion. The high-concentration regions for the low-PM-emission fuel nozzles were located further upstream and they were on a smaller scale than that for the standard nozzle. This suggests that their PM-reducing effect may be due to their upstream location and the smaller-scale of their high-concentration regions.


Fuel ◽  
2019 ◽  
Vol 239 ◽  
pp. 1351-1362 ◽  
Author(s):  
Zhichao Zhang ◽  
Longfei Chen ◽  
Yiji Lu ◽  
Anthony Paul Roskilly ◽  
Xiaoli Yu ◽  
...  

2019 ◽  
Vol 218 ◽  
pp. 116974
Author(s):  
Zhenhong Yu ◽  
Michael T. Timko ◽  
Scott C. Herndon ◽  
Richard, C. Miake-Lye ◽  
Andreas J. Beyersdorf ◽  
...  

1993 ◽  
Vol 89 (1-4) ◽  
pp. 265-273 ◽  
Author(s):  
M. BRANDAUER ◽  
A. SCHULZ ◽  
A. PFEIFFER ◽  
S. WITIIG

1980 ◽  
Vol 23 (184) ◽  
pp. 1655-1662 ◽  
Author(s):  
Hiroyuki HIROYASU ◽  
Masataka ARAI ◽  
Toshikazu KADOTA ◽  
Jiro YOSO

2020 ◽  
Vol 142 (9) ◽  
Author(s):  
Zilong Li ◽  
Guan Huang ◽  
Chenxu Jiang ◽  
Yong Qian ◽  
Zhuoyao He ◽  
...  

Abstract Low NOx and particulate matter (PM) emissions are simultaneously attempted to implement via an experimental study on diesel/butanol isomers binary fuels in premixed-charge compression ignition (PCCI) mode. N-butanol, iso-butanol, sec-butanol, and tert-butanol were blended with diesel in a certain volume ratio of 0.24:0.76, denoted as N24, I24, S24, and T24, respectively. The indicated thermal efficiency (ITE) of binary fuels in PCCI mode decreases slightly than that in direction injection (DI) mode. T24 obtains higher ITE than the other three test fuels with 50% exhaust gas recirculation (EGR). NOx formation is certainly inhibited more than 60% in PCCI mode, especially when the EGR rate is 50%. PCCI mode produces more CO, HC, and carbonyl emissions than DI mode to varying degrees; under these circumstances, T24 tends to have the lowest emissions among four test fuels, reflecting the potential of tert-butanol as a diesel alternative fuel. Butanol isomers have a vital contribution on particulate matter emissions inhibition for both PM total number and total mass. Tert-butanol tends to form accumulation mode particle, and n-butanol tends to form nucleation mode mainly caused by molecular structure diversity of isomers. The geometric mean diameter of diesel/butanol isomers increases in PCCI mode compared with that in DI mode.


Sign in / Sign up

Export Citation Format

Share Document