Electroless formation of conductive polymer–metal nanostructured composites at boundary of two immiscible solvents. Morphology and properties

2010 ◽  
Vol 55 (26) ◽  
pp. 7737-7744 ◽  
Author(s):  
Marianna Gniadek ◽  
Mikolaj Donten ◽  
Zbigniew Stojek
2008 ◽  
Vol 56 ◽  
pp. 111-115 ◽  
Author(s):  
Byung Geun Ko ◽  
Hyok Chon Kwon ◽  
Song Jun Lee

This paper describes a novel method of self-sensing Ion-conductive Polymer Metal Composite (IPMC) actuator. Unlike the previous self-sensing technique, the proposed principle is based on the electric charge of the IPMC itself, which is correlated with its curvature. At the normal state, IPMC is electrically charged, and the amount varies according to the status of IPMC. While it is operated as an actuator, it also gives position information in the form of the electric charge amount, which is utilized for fast and accurate position control. In order to get the bending status of the actuator, the instantaneous voltage of IPMC is measured during the open state for input signal. The uncomplicated system is constructed to verify if the developed method is effective for the selfsensing actuator and evaluated by the experimental basis. The way to actuate the IPMC with selfsensing is a supplying discrete signal as an input, and it is also evaluated experimentally. This research also represents relatively simple structure for both actuation and sensing, which is very important factor to be implemented as a controller circuit for various applications.


2017 ◽  
Vol 80 (4) ◽  
pp. 205-214
Author(s):  
Jin Kawakita ◽  
Toyohiro Chikyow

1997 ◽  
Vol 488 ◽  
Author(s):  
R. J. Racicot ◽  
S. C. Yang ◽  
R. Brown

AbstractDuring the past few years there has been a strong interest in developing conducting polymers as an alternative to the traditional anticorrosion coatings. One of the driving forces for this research comes from the need for an environmentally friendly chromate-free anticorrosion coating for highstrength light weight aluminum alloys. The possibilities for a new scratch-tolerant paint for steel prompted the development of conductive polymer anticorrosion paints. By molecular engineering, we have synthesized a double-strand polymeric complex of polyaniline that is suitable as an anticorrosion paint on metals in low pH environments. In this article, we will discuss (1) the molecular design for solubility and adhesion, (2) the effectiveness of the electroactive coating under electrochemical impedance tests, and (3) a mechanistic study of the anticorrosion mechanism by examining the polymer/metal interfacial interactions.


Author(s):  
Daniele Sassone ◽  
Juqin Zeng ◽  
Marco Fontana ◽  
Adriano Sacco ◽  
M. Amin Farkhondehfal ◽  
...  

AbstractA class of metal-doped polyanilines (PANIs) was synthesized and investigated as electrocatalysts for the carbon dioxide reduction reaction (CO2RR). These materials show good affinity for the electrode substrate and allow to obtain stable binder-free electrodes, avoiding the utilization of expensive ionomer and additives. The emeraldine-base polyaniline (EB-PANI), in absence of metal dopant, shows negligible electrocatalytic activity and selectivity toward the CO2RR. Such behavior significantly improves once EB-PANI is doped with an appropriate cationic metal (Mn, Cu or Sn). In particular, the Sn-PANI outperforms other metal-doped samples, showing a good turnover frequency of 72.2 h−1 for the CO2RR at − 0.99 V vs the reversible hydrogen electrode and thus satisfactory activity of metal single atoms. Moreover, the Sn-PANI also displays impressive stability with a 100% retention of the CO2RR selectivity and an enhanced current density of 4.0 mA cm−2 in a 10-h test. PANI, a relatively low-cost substrate, demonstrates to be easily complexed with different metal cations and thus shows high tailorability. Complexing metal with conductive polymer represents an emerging strategy to realize active and stable metal single-atom catalysts, allowing efficient utilization of metals, especially the raw and precious ones. Graphic abstract


Sign in / Sign up

Export Citation Format

Share Document