Unravelling the development of regional-scale shear zones by a multidisciplinary approach: the case study of the Ferriere-Mollières Shear Zone (Argentera Massif, Western Alps)

2021 ◽  
pp. 104399
Author(s):  
M. Simonetti ◽  
R. Carosi ◽  
C. Montomoli ◽  
R.D. Law ◽  
J.M. Cottle
Keyword(s):  
Shear Zone ◽  
Multidisciplinary Approach ◽  
Regional Scale ◽  
Shear Zones ◽  
Western Alps ◽  
Scale Shear

The role of regional-scale shear zones in paleogeographic reconstructions: the case study of the Variscan belt in the Mediterranean area

2021 ◽  
Author(s):  
Matteo Simonetti ◽  
Rodolfo Carosi ◽  
Chiara Montomoli ◽  
Salvatore Iaccarino
Keyword(s):  
Earth Sciences ◽  
Shear Zone ◽  
Regional Scale ◽  
Shear Zones ◽  
Mediterranean Area ◽  
Variscan Belt ◽  
Metamorphic Evolution ◽  
The Mediterranean ◽  
Scale Shear

<p>Paleogeographic reconstruction and recognition of the tectono-metamorphic evolution of ancient orogenic belt is often complex. The combination of an adequate amount of paleomagnetic, metamorphic, structural and geochronological data is necessary. Fundamental data derive from the study of regional-scale shear zones, that can be directly observed, by combining detailed field work with structural analysis, microstructural analysis and petrochronology. The Southern European Variscan Belt in the Mediterranean area was partially overprinted by the Alpine cycle (Stampfli and Kozur, 2006) and correlations are mainly based on lithological similarities. Little attention has been paid to the compatibility of structures in the dispersed fragments. A main debate is the connection among the Corsica-Sardinia Block (CSB), the Maures-Tanneron Massif (MTM) and the future Alpine External Crystalline Massifs (ECM) (Stampfli et al., 2002; Advokaat et al., 2014) and if these sectors were connected by a network of shear zones of regional extent, known as the East Variscan Shear Zone (EVSZ).</p><p>We present a multidisciplinary study of shear zones cropping out in the CSB (the Posada-Asinara shear zone; Carosi et al., 2020), in the MTM (the Cavalaire Fault; Simonetti et al., 2020a) and in the ECM (the Ferriere-Mollières and the Emosson-Berard shear zones; Simonetti et al., 2018; 2020b).</p><p>Kinematic and finite strain analysis allowed to recognize a transpressional deformation, with a major component of pure shear and a variable component of simple shear, coupled with general flattening deformation. Syn-kinematic paragenesis, microstructures and quartz c-axis fabrics revealed that shear deformation, in all the studied sectors, occurred under decreasing temperature starting from amphibolite-facies up to greenschist-facies. A systematic petrochronological study (U-Th-Pb on monazite collected in the sheared rocks) was conducted in order to constrain the timing of deformation. We obtained ages ranging between ~340 Ma and ~320 Ma. Ages of ~340-330 Ma can be interpreted as the beginning of the activity of the EVSZ along its older branches while ages of ~320 Ma, obtained in all the shear zones, demonstrate that they were all active in the same time span.</p><p>The multidisciplinary approach revealed a similar kinematics and tectono-metamorphic evolution of the studied shear zones contributing to better constrain the extension and timing the EVSZ and to strength the paleogeographic reconstructions of the Southern Variscan belt during Late Carboniferous time, with important implications on the evolution of the Mediterranean area after the Late Paleozoic. This case study demonstrates how paleogeographic reconstructions could benefit from datasets obtained from large-scale structures (i.e., shear zones) that can be directly investigated.</p><p> </p><p>Advokaat et al. (2014). Earth and Planetary Science Letters 401, 183–195</p><p> </p><p>Carosi et al. (2012). Terra Nova 24, 42–51</p><p> </p><p>Carosi and Palmeri (2002). Geological Magazine 139.</p><p> </p><p>Carosi et al. (2020). Geosciences 10, 288.</p><p> </p><p>Simonetti et al (2020a). International Journal of Earth Sciences 109, 2261–2285</p><p> </p><p>Simonetti et al. (2020b). Tectonics 39</p><p> </p><p>Simonetti et al. (2018). International Journal of Earth Sciences. 107, 2163–2189</p><p> </p><p>Stampfli and Kozur (2006). Geological Society, London, Memoirs 32, 57–82</p><p> </p><p>Stampfli et al. (2002). Journal of the Virtual Explorer 8, 77</p>

scholarly journals Eburnean deformation pattern of Burkina Faso and the tectonic significance of shear zones in the West African craton

2020 ◽  
Vol 191 ◽  
pp. 2 ◽  
Author(s):  
Dominique Chardon ◽  
Ousmane Bamba ◽  
Kalidou Traoré
Keyword(s):  
Burkina Faso ◽  
Shear Zone ◽  
Regional Scale ◽  
Kinematic Model ◽  
Shear Zones ◽  
West African ◽  
Deformation Pattern ◽  
The West ◽  
West African Craton ◽  
Regional Flow

Shear zones of the Paleoproterozoic Eburnean accretionary Orogen (West African craton) are investigated by means of large-scale structural mapping. Regional scale (10-100 km) mapping was based on the aeromagnetic survey of Burkina Faso and craton-scale (1000 km) mapping on a compilation of fabric data. At both scales, shear zones are arranged as an anastomosed transpressional network that accommodated distributed shortening and lateral flow of the orogenic lithosphere between the converging Kénéma-Man and Congo Archean provinces. Structural interference patterns at both scales were due to three-dimensional partitioning of progressive transpressional deformation and interactions among shear zones that absorbed heterogeneities in the regional flow patterns while maintaining the connectivity of the shear zone network. Such orogen-scale kinematic patterns call for caution in using the deformation phase approach without considering the “bigger structural picture” and interpreting displacement history of individual shear zones in terms of plate kinematics. The West African shear zone pattern is linked to that of the Guiana shield through a new transatlantic correlation to produce an integrated kinematic model of the Eburnean-Transamazonian orogen.

scholarly journals Crystallographic and Seismic Anisotropies of Calcite at Different Depths: A Study Using Quantitative Texture Analysis by Neutron Diffraction

Minerals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 26 ◽  
Author(s):  
Michele Zucali ◽  
Daniel Chateigner ◽  
and Bachir Ouladdiaf
Keyword(s):  
Neutron Diffraction ◽  
Texture Analysis ◽  
Shear Zone ◽  
Shear Zones ◽  
Orientation Distribution ◽  
Western Alps ◽  
S Wave ◽  
Wide Variability ◽  
Fold Belts ◽  
Different Depths

Eight samples of limestones and marbles were studied by neutron diffraction to collect quantitative texture (i.e., crystallographic preferred orientations or CPO) of calcite deforming at different depths in the crust. We studied the different Texture patterns developed in shear zones at different depth and their influence on seismic anisotropies. Samples were collected in the French and Italian Alps, Apennines, and Paleozoic Sardinian basement. They are characterized by isotropic to highly anisotropic (e.g., mylonite shear zone) fabrics. Mylonite limestones occur as shear zone horizons within the Cenozoic Southern Domain in Alpine thrust-and-fold belts (Italy), the Briançonnais domain of the Western Alps (Italy-France border), the Sardinian Paleozoic back-thrusts, or in the Austroalpine intermediate units. The analyzed marbles were collected in the Carrara Marble, in the Austroalpine Units in the Central (Mortirolo) and Western Alps (Valpelline). The temperature and depth of development of fabrics vary from <100 ∘ C, to 800 ∘ C and depth from <10 km to about 30 km, corresponding from upper to lower crust conditions. Quantitative Texture Analysis shows different types of patterns for calcite: random to strongly textured. Textured types may be further separated in orthorhombic and monoclinic (Types A and B), based on the angle defined with the mesoscopic fabrics. Seismic anisotropies were calculated by homogenizing the single-crystal elastic tensor, using the Orientation Distribution Function calculated by Quantitative Texture Analysis. The resulting P- and S-wave anisotropies show a wide variability due to the textural types, temperature and pressure conditions, and dip of the shear planes.

scholarly journals Switching deformation mode and mechanisms during subduction of continental crust: a case study from Alpine Corsica

2017 ◽  
Author(s):  
Giancarlo Molli ◽  
Luca Menegon ◽  
Alessandro Malasoma
Keyword(s):  
Shear Zone ◽  
Continental Crust ◽  
Fluid Pressure ◽  
Deformation Mode ◽  
Shear Zones ◽  
Small Scale ◽  
Plastic Shear ◽  
Stick Slip ◽  
Brittle Ductile Transition

Abstract. The switching in deformation mode (from distributed to localized) and mechanisms (viscous versus frictional) represent a relevant issue in the frame of crustal deformation, being also connected with the concept of the brittle-ductile transition and seismogenesis. In subduction environment, switching in deformation mode and mechanisms may be inferred along the subduction interface, in a transition zone between the highly coupled (seismogenic zone) and decoupled deeper aseismic domain (stable slip). On the other hand, the role of brittle precursors in nucleating crystal-plastic shear zones has received more and more consideration being now recognized as fundamental in the localization of deformation and shear zone development, thus representing a case in which switching deformation mode and mechanisms interact and relate to each other. This contribution analyzes an example of a crystal plastic shear zone localized by brittle precursor formed within a host granitic-protomylonite during deformation in subduction-related environment. The studied structures, possibly formed by transient instability associated with fluctuations of pore fluid pressure and episodic strain rate variations may be considered as a small scale example of fault behaviour associated with a cycle of interseismic creep and coseismic rupture or a new analogue for episodic tremors and slow slip structures. Our case-study represents, therefore, a fossil example of association of fault structures related with stick-slip strain accomodation during subduction of continental crust.

scholarly journals Early Neoproterozoic Deformation Kinematics in the Chottanagpur Gneiss Complex (Eastern India): Evidence from the Curvilinear Hundru Falls Shear ZoneAnalysis

Lithosphere ◽  
2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Nicole Sequeira ◽  
Abhijit Bhattacharya
Keyword(s):  
Shear Zone ◽  
Regional Scale ◽  
Shear Zones ◽  
Ratio Method ◽  
Strain Partitioning ◽  
Gneiss Complex ◽  
Deformation Kinematics ◽  
Detachment Zone ◽  
The Mean ◽  
Early Neoproterozoic

Abstract Curvilinear steep shear zones originate in different tectonic environments. In the Chottanagpur Gneiss Complex (CGC), the steeply dipping, left-lateral and transpressive Early Neoproterozoic Hundru Falls Shear Zone (HFSZ) with predominantly north-down kinematics comprises two domains, e.g., an arcuate NW-striking (in the west) to W-striking (in the east) domain with gently plunging stretching lineation that curves into a W-striking straight-walled domain with down-dip lineation. The basement-piercing HFSZ truncates a carapace of flat-lying amphibolite facies paraschist and granitoid mylonites, and recumbently folded anatectic gneisses. The carapace—inferred to be a midcrustal regional-scale low-angle detachment zone—structurally overlies an older basement of Early Mesoproterozoic anatectic gneisses intruded by Mid-Mesoproterozoic/Early Neoproterozoic granitoids unaffected by the Early Neoproterozoic extensional tectonics. The mean kinematic vorticity values in the steep HFSZ-hosted granitoids computed using the porphyroclast aspect ratio method are 0.74–0.83 and 0.51–0.65 in domains with shallow and steep lineations, respectively. The granitoid mylonites show a chessboard subgrain microstructure, but lack evidence for suprasolidus deformation. The timing relationship between the two domains is unclear. If the two HFSZ domains were contemporaneous, the domain of steep lineations with greater coaxial strain relative to the curvilinear domain formed due to strain partitioning induced by variations in mineralogy and/or temperature of the cooling granitoid plutons. Alternately, the domain of gently plunging lineations in the HFSZ was a distinct shear zone that curved into a subsequent straight-walled shear zone with steeply plunging lineation due to a northward shift in the convergence direction during deformation contemporaneous with the Early Neoproterozoic accretion of the CGC and the Singhbhum Craton.

Complex kinematics in a major ductile shear zone, NW Shetland: Evidence of ductile extrusion during Caledonian transpression

2021 ◽  
Author(s):  
Timothy Armitage ◽  
Robert Holdsworth ◽  
Robin Strachan ◽  
Thomas Zach ◽  
Diana Alvarez-Ruiz ◽  
...  
Keyword(s):  
Shear Zone ◽  
Hanging Wall ◽  
Regional Scale ◽  
Shear Zones ◽  
White Mica ◽  
Strike Slip ◽  
Amphibolite Facies ◽  
Lateral Extrusion ◽  
Shear Sense ◽  
Ductile Shear

&lt;p&gt;Ductile shear zones are heterogeneous areas of strain localisation which often display variation in strain geometry and combinations of coaxial and non-coaxial deformation. One such heterogeneous shear zone is the c. 2 km thick Uyea Shear Zone (USZ) in northwest Mainland Shetland (UK), which separates variably deformed Neoarchaean orthogneisses in its footwall from Neoproterozoic metasediments in its hanging wall (Fig. a). The USZ is characterised by decimetre-scale layers of dip-slip thrusting and extension, strike-slip sinistral and dextral shear senses and interleaved ultramylonitic coaxially deformed horizons. Within the zones of transition between shear sense layers, mineral lineations swing from foliation down-dip to foliation-parallel in kinematically compatible, anticlockwise/clockwise-rotations on a local and regional scale (Fig. b). Rb-Sr dating of white mica grains via laser ablation indicates a c. 440-425 Ma Caledonian age for dip-slip and strike-slip layers and an 800 Ma Neoproterozoic age for coaxial layers. Quartz opening angles and microstructures suggest an upper-greenschist to lower-amphibolite facies temperature for deformation. We propose that a Neoproterozoic, coaxial event is overprinted by Caledonian sinistral transpression under upper greenschist/lower amphibolite facies conditions. Interleaved kinematics and mineral lineation swings are attributed to result from differential flow rates resulting in vertical and lateral extrusion and indicate regional-scale sinistral transpression during the Caledonian orogeny in NW Shetland. This study highlights the importance of linking geochronology to microstructures in a poly-deformed terrane and is a rare example of a highly heterogeneous shear zone in which both vertical and lateral extrusion occurred during transpression.&lt;/p&gt;&lt;p&gt;&lt;img src=&quot;https://contentmanager.copernicus.org/fileStorageProxy.php?f=gepj.0cf6ef44e5ff57820599061/sdaolpUECMynit/12UGE&amp;app=m&amp;a=0&amp;c=d96bb6db75eed0739f2a6ee90c9ad8fd&amp;ct=x&amp;pn=gepj.elif&amp;d=1&quot; alt=&quot;&quot;&gt;&lt;/p&gt;

Upper Carboniferous-Permian tectonics in Central Mediterranean: an updated revision

2020 ◽  
Author(s):  
Giancarlo Molli ◽  
Andrea Brogi ◽  
Alfredo Caggianelli ◽  
Enrico Capezzuoli ◽  
Domenico Liotta ◽  
...  
Keyword(s):  
Shear Zone ◽  
Regional Scale ◽  
Sedimentary Basins ◽  
Sedimentary Facies ◽  
Shear Zones ◽  
Low Grade ◽  
Central Mediterranean ◽  
Upper Carboniferous ◽  
Fold And Thrust Belt ◽  
Splay Faults

&lt;p&gt;An updated revision of the upper Carboniferous-Permian tectonics recorded in Corsica, Calabria and Tuscany is here proposed. We combine our and literature data to document how the sedimentary, tectono-metamorphic and magmatic upper Carboniferous-Permian record fits with a regional-scale tectonic scenario characterized by trascurrent fault systems associated with stretched crustal domains in which extensional regional structures, magmatism and transtensional basins developed. In Corsica, altogether with well-known effusive and intrusive Permian magmatism, the alpine S.Lucia nappe exposes a kilometer-scale portion of the Permian lower to mid-crust, with many similarities to the Ivrea-Verbano zone. The two distinct Mafic and Leucogranitic complexes, which characterize this crustal domain are juxtposed by an oblique-slip shear zone named as S.Lucia Shear Zone. Structural and petrological data document interaction between magmatism, metamorphism and shearing during Permian in the c. 800-400 &amp;#176;C temperature range. In Calabria (Sila, Serre and Aspromonte), a continuous pre-Mesozoic crustal section is exposed. The lower crust portion of such section is mainly made up of granulites and migmatitic paragneisses with subordinate marbles and metabasites. The mid-crustal section includes an up to 13 km thick sequence of granitoids of tonalitic to granitic composition, emplaced between 306 and 295 Ma and progressively deformed during retrograde extensional shearing to end with a final magmatic activity between 295 and 277 Ma, consisting in the injection of shallower dykes in a transtensional regime. The section is completed by an upper crustal portion mainly formed by a Paleozoic succession deformed as a low-grade fold and thrust belt, locally overlaying medium-grade paragneiss units, and therefore as a whole reminiscent of the external/nappe zone domains of Sardinia Hercynian orogen. In Tuscany we document, how late Carboniferous/Permian shallow marine to continental sedimentary basins characterized by unconformity and abrupt change in sedimentary facies (coal-measures, red fanglomerate deposits) and acid magmatism well fit a transtensional setting with a mid-crustal shear zone linked with a system of E-W trending (in present orientation) upper crust splay faults. We will frame the whole dataset in a regional framework of first-order transcurrent shear zones network which includes a westernmost S.Lucia Shear Zone and an easternmost East Tuscan Shear Zone, with intervening crustal domains in which extensional to transtensional shearing occured.&lt;/p&gt;

Sign in / Sign up

Export Citation Format

Share Document