Improved catalytic performance of GA cross-linking treated Rhizopus oryzae IFO 4697 whole cell for biodiesel production

2010 ◽  
Vol 45 (7) ◽  
pp. 1192-1195 ◽  
Author(s):  
Ting Sun ◽  
Wei Du ◽  
Dehua Liu ◽  
Lingmei Dai
BioResources ◽  
2015 ◽  
Vol 11 (1) ◽  
pp. 850-860 ◽  
Author(s):  
Qiyang He ◽  
Hao Shi ◽  
Huaxiang Gu ◽  
Gilda Naka ◽  
Huaihai Ding ◽  
...  

Whole cell biocatalysts for biodiesel production have garnered significant attention in recent years, as they can help avoid the complex procedures of isolation, purification, and immobilization of extracellular lipase. Because of its renewability and biodegradability, loofah (Luffa cylindrica) sponge is an advantageous substitute for traditional biomass carriers in whole cell immobilization. Rhizopus oryzae mycelia can spontaneously attach onto loofah sponge particles (LSPs) during cell cultivation. The highest immobilized R. oryzae cells concentration can reach up to 1.40 g/1 g of LSPs. The effects of biocatalyst addition and water content on methanolysis for biodiesel production were investigated in this paper. The operational stability of glutaraldehyde-treated biocatalyst at 35 °C, using a 1:1 oil-to-methanol ratio, was assayed, revealing a 3.4-fold increase in half-life compared with the untreated biocatalyst. Under optimized conditions, the yield of methyl esters in the reaction mixture reached 82.2% to 92.2% in each cycle. These results suggested that loofah sponge is a potential fungi carrier for an immobilized whole-cell biocatalyst.


Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 421
Author(s):  
Xiaoxu Yang ◽  
Yan Zhang ◽  
Huimin Pang ◽  
Sheng Yuan ◽  
Xuxia Wang ◽  
...  

In this study, we overcame the limitations of single-enzyme system catalysis by codisplaying Candida rugosa lipase 1 (CRL1) and Rhizopus oryzae lipase (ROL) on the cell surfaces of the whole-cell catalyst Pichia pastoris to produce biodiesel from tallow seed oil. We screened double antibiotic-resistant strains on tributyrin plates, performed second electroporation based on single-displayed ROL on GS115/KpRS recombinants and single-displayed CRL1 on GS115/ZCS recombinants and obtained an ROL/CRL1 codisplay on P. pastoris GS115 surfaces. The maximum activity of the codisplaying GS115/pRCS recombinant was 470.59 U/g dried cells, which was 3.9-fold and 1.3-fold higher than that of single-displayed ROL and CRL1, respectively. When self-immobilized lipases were used as whole-cell catalysts, the rate of methyl ester production from GS115/pRCS harboring ROL and CRL1 was 1.4-fold higher than that obtained with single-displayed ROL. Therefore, biodiesel catalysis by synergetic codisplayed enzymes is an alternative biodiesel production strategy.


2020 ◽  
Vol 16 ◽  
Author(s):  
Anping Wang ◽  
Heng Zhang ◽  
Hu Li ◽  
Song Yang

Background: With the gradual decrease of fossil energy, the development of alternatives to fossil energy has attracted more and more attention. Biodiesel is considered to be the most potent alternative to fossil energy, mainly due to its green, renewable and biodegradable advantages. The stable, efficient and reusable catalysts are undoubtedly the most critical in the preparation of biodiesel. Among them, nanoporous carbon-based acidic materials are very important biodiesel catalysts. Objective: The latest advances of acidic nanoporous carbon catalysts in biodiesel production was reviewed. Methods: Biodiesel is mainly synthesized by esterification and transesterification. Due to the important role of nanoporous carbon-based acidic materials in the catalytic preparation of biodiesel, we focused on the synthesis, physical and chemical properties, catalytic performance and reusability. Results: Acidic catalytic materials have a good catalytic performance for high acid value feedstocks. However, the preparation of biodiesel with acid catalyst requires relatively strict reaction conditions. The application of nanoporous acidic carbon-based materials, due to the support of carbon-based framework, makes the catalyst have good stability and unique pore structure, accelerates the reaction mass transfer speed and accelerates the reaction. Conclusion: Nanoporous carbon-based acidic catalysts have the advantages of suitable pore structure, high active sites, and high stability. In order to make these catalytic processes more efficient, environmentally friendly and low cost, it is an important research direction for the future biodiesel catalysts to develop new catalytic materials with high specific surface area, suitable pore size, high acid density, and excellent performance.


2020 ◽  
Vol 13 (2) ◽  
pp. 4462-4476 ◽  
Author(s):  
António B. Mapossa ◽  
Joelda Dantas ◽  
Manoel R. Silva ◽  
Ruth H.G.A. Kiminami ◽  
Ana Cristina F.M. Costa ◽  
...  

2013 ◽  
Vol 17 (4) ◽  
pp. 331-336 ◽  
Author(s):  
Sneha Athalye ◽  
Ratna Sharma-Shivappa ◽  
Steven Peretti ◽  
Praveen Kolar ◽  
Jack P. Davis

Catalysts ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 527 ◽  
Author(s):  
Gaojian Ma ◽  
Lingmei Dai ◽  
Dehua Liu ◽  
Wei Du

Acidic oil, which is easily obtained and with lower cost, is a potential raw material for biodiesel production. Apart from containing large quantity of FFAs (free fatty acids), acidic oil usually contains some amount of inorganic acid, glycerides and some other complex components, leading to complicated effect on lipase’s catalytic performance. Exploring the efficient process of converting acidic oil for biodiesel production is of great significance to promote the use of acidic oil. A two-step conversion process for acidic soybean oil was proposed in this paper, where sulfuric acid-mediated hydrolysis was adopted first, then the hydrolyzed free fatty acid, collected from the upper oil layer was further subject to the second-step esterification catalyzed by immobilized lipase Novozym435. Through this novel process, the negative effect caused by harmful impurities and by-product glycerol on lipase was eliminated. A fatty acid methyl ester (FAME) yield of 95% could be obtained with the acid value decreased to 4 mgKOH/g from 188 mgKOH/g. There was no obvious loss in lipase’s activity and a FAME yield of 90% could be maintained with the lipase being repeatedly used for 10 batches. This process was found to have a good applicability to different acidic oils, indicating it has great prospect for converting low quality oil sources for biodiesel preparation.


2018 ◽  
Vol 192 ◽  
pp. 03006
Author(s):  
Jakkrapong Jitjamnong

The purpose of this research was to investigate the catalytic activity of Ba loading on calcium oxide (CaO) catalyst by varying the amount of barium added during the synthesis: 5-15 wt%. The waste egg shells were utilized as a CaO heterogeneous catalyst by calcined at 900 °C for 2 h. The Ba/CaO catalysts were prepared by impregnation method and were used as a catalyst in transesterification reaction of canola oil via microwave irradiation under microwave power 300 W. The characterization of catalyst and FAME composition of biodiesel were determined by X-ray fluorescence (XRF), scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), and gas chromatography (GC-FID). The conditions of biodiesel production were operated at 60 °C, 3 wt% of catalyst loading, 9:1 methanol-to-canola oil ratio, and microwave irradiation power was 300W for 2 min. The experimental results found that, the waste egg shells consist mainly of CaCO3, which was decomposed to CaO more than 88 wt% after cacination step. The 15 wt% Ba/CaO catalysts exhibited the best catalytic performance with the FAME conversion higher than 97.68%.


Sign in / Sign up

Export Citation Format

Share Document