Disturbance growth in an unstable three-dimensional boundary layer and its dependence on environmental conditions

1996 ◽  
Vol 316 ◽  
pp. 73-113 ◽  
Author(s):  
H. Deyhle ◽  
H. Bippes
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Environmental Conditions ◽  
Three Dimensional ◽  
Transition Process ◽  
Two Dimensional ◽  
Mean Flow ◽  
Complex Dependence ◽  
Dimensional Boundary ◽  
Disturbance Growth

Experimental investigations in the three-dimensional boundary layer of a swept flat plate with the pressure gradient induced from outside are aimed at enhancing knowledge of the transition process in the presence of pure crossflow instability. The development of disturbances is characterized by the occurrence of both stationary and travelling instability modes, by early nonlinear development and by complex dependence upon the environmental conditions. Experiments under natural conditions of transition showed a good correspondence of the identified modes with those predicted by local linear stability theory. The disturbance growth, however, is generally overpredicted. Controlled excitation of crossflow vortices allowing measurements closer to the linear range of amplification confirmed this result. Nonlinear effects such as interaction between stationary disturbances and base flow and between travelling and stationary modes have already been observed when the naturally excited instabilities become of measurable size.The most striking feature of the disturbance development is the complex dependence on initial conditions. Experiments under systematically varied environments showed that surface roughness represents the key parameter responsible for the initiation of stationary crossflow vortices. In contrast to two-dimensional boundary layers, free-stream turbulence influences the transition process indirectly. Only for turbulence levels Tu > 0.2% and smooth surfaces do the travelling instability waves dominate. The location of the final breakdown of laminar flow is clearly determined by the saturation amplitude of crossflow vortices. The receptivity to sound, two-dimensional surface roughness and non-uniformities of the test-section mean flow was found to be very weak.

Modelling the calmed region behind a spot

2005 ◽  
Vol 363 (1830) ◽  
pp. 1069-1078 ◽  
Author(s):  
S.N Brown ◽  
F.T Smith
Keyword(s):  
Boundary Layer ◽  
Theoretical Model ◽  
Slip Velocity ◽  
Three Dimensional ◽  
Cross Flow ◽  
Two Dimensional ◽  
Turbulent Spot ◽  
Mean Flow ◽  
Flow Surface ◽  
Dimensional Boundary

A theoretical model of the laminar ‘calmed region’ following a three-dimensional turbulent spot within a transitioning two-dimensional boundary layer is formulated and discussed. The flow is taken to be inviscid, and the perturbation mean flow surface streamlines calculated represent disturbances to the basic slip velocity. Available experimental evidence shows a fuller, more stable, streamwise profile in a considerable region trailing the spot, with cross-flow ‘inwash’ towards the line of symmetry. Present results are in qualitative agreement with this evidence.

Acoustic receptivity and evolution of two-dimensional and oblique disturbances in a Blasius boundary layer

2001 ◽  
Vol 432 ◽  
pp. 69-90 ◽  
Author(s):  
RUDOLPH A. KING ◽  
KENNETH S. BREUER
Keyword(s):  
Boundary Layer ◽  
Surface Roughness ◽  
Acoustic Wave ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Surface Waviness ◽  
S Wave ◽  
Boundary Layer Instability ◽  
Blasius Boundary Layer ◽  
Tollmien Schlichting

An experimental investigation was conducted to examine acoustic receptivity and subsequent boundary-layer instability evolution for a Blasius boundary layer formed on a flat plate in the presence of two-dimensional and oblique (three-dimensional) surface waviness. The effect of the non-localized surface roughness geometry and acoustic wave amplitude on the receptivity process was explored. The surface roughness had a well-defined wavenumber spectrum with fundamental wavenumber kw. A planar downstream-travelling acoustic wave was created to temporally excite the flow near the resonance frequency of an unstable eigenmode corresponding to kts = kw. The range of acoustic forcing levels, ε, and roughness heights, Δh, examined resulted in a linear dependence of receptivity coefficients; however, the larger values of the forcing combination εΔh resulted in subsequent nonlinear development of the Tollmien–Schlichting (T–S) wave. This study provides the first experimental evidence of a marked increase in the receptivity coefficient with increasing obliqueness of the surface waviness in excellent agreement with theory. Detuning of the two-dimensional and oblique disturbances was investigated by varying the streamwise wall-roughness wavenumber αw and measuring the T–S response. For the configuration where laminar-to-turbulent breakdown occurred, the breakdown process was found to be dominated by energy at the fundamental and harmonic frequencies, indicative of K-type breakdown.

Experimental and Theoretical Investigation of the Supersonic Boundary Layer Stability on the Swept Wing

2008 ◽  
Vol 3 (3) ◽  
pp. 34-38
Author(s):  
Sergey A. Gaponov ◽  
Yuri G. Yermolaev ◽  
Aleksandr D. Kosinov ◽  
Nikolay V. Semionov ◽  
Boris V. Smorodsky
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Leading Edge ◽  
Supersonic Boundary Layer ◽  
Mean Flow ◽  
Swept Wing ◽  
Wing Model ◽  
Dimensional Boundary ◽  
The Stability ◽  
Good Agreement

Theoretical and an experimental research results of the disturbances development in a swept wing boundary layer are presented at Mach number М = 2. In experiments development of natural and small amplitude controllable disturbances downstream was studied. Experiments were carried out on a swept wing model with a lenticular profile at a zero attack angle. The swept angle of a leading edge was 40°. Wave parameters of moving disturbances were determined. In frames of the linear theory and an approach of the local self-similar mean flow the stability of a compressible three-dimensional boundary layer is studied. Good agreement of the theory with experimental results for transversal scales of unstable vertices of the secondary flow was obtained. However the calculated amplification rates differ from measured values considerably. This disagreement is explained by the nonlinear processes observed in experiment

Numerical simulation of boundary-layer transition and transition control

1989 ◽  
Vol 199 ◽  
pp. 403-440 ◽  
Author(s):  
E. Laurien ◽  
L. Kleiser
Keyword(s):  
Boundary Layer ◽  
Stokes Equations ◽  
Three Dimensional ◽  
Transition Process ◽  
Numerical Results ◽  
Boundary Layer Transition ◽  
Two Dimensional ◽  
Layer Transition ◽  
Longitudinal Vortices ◽  
Tollmien Schlichting

The laminar-turbulent transition process in a parallel boundary-layer with Blasius profile is simulated by numerical integration of the three-dimensional incompressible Navier-Stokes equations using a spectral method. The model of spatially periodic disturbances developing in time is used. Both the classical Klebanoff-type and the subharmonic type of transition are simulated. Maps of the three-dimensional velocity and vorticity fields and visualizations by integrated fluid markers are obtained. The numerical results are compared with experimental measurements and flow visualizations by other authors. Good qualitative and quantitative agreement is found at corresponding stages of development up to the one-spike stage. After the appearance of two-dimensional Tollmien-Schlichting waves of sufficiently large amplitude an increasing three-dimensionality is observed. In particular, a peak-valley structure of the velocity fluctuations, mean longitudinal vortices and sharp spike-like instantaneous velocity signals are formed. The flow field is dominated by a three-dimensional horseshoe vortex system connected with free high-shear layers. Visualizations by time-lines show the formation of A-structures. Our numerical results connect various observations obtained with different experimental techniques. The initial three-dimensional steps of the transition process are consistent with the linear theory of secondary instability. In the later stages nonlinear interactions of the disturbance modes and the production of higher harmonics are essential.We also study the control of transition by local two-dimensional suction and blowing at the wall. It is shown that transition can be delayed or accelerated by superposing disturbances which are out of phase or in phase with oncoming Tollmien-Schlichting instability waves, respectively. Control is only effective if applied at an early, two-dimensional stage of transition. Mean longitudinal vortices remain even after successful control of the fluctuations.

The three-dimensional stability of boundary-layer flow over compliant walls

1992 ◽  
Vol 238 ◽  
pp. 537-577 ◽  
Author(s):  
K. S. Yeo
Keyword(s):  
Boundary Layer ◽  
Eigenvalue Problem ◽  
Growth Rates ◽  
Isotropic Material ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Material Anisotropy ◽  
Compliant Walls ◽  
Tollmien Schlichting ◽  
Disturbance Growth

This paper examines the linear stability of the Blasius boundary layer over compliant walls to three-dimensional (oblique) disturbance wave modes. The formulation of the eigenvalue problem is applicable to compliant walls possessing general material anisotropy. Isotropic-material walls and selected classes of anisotropic-material walls are studied. When the properties of the wall are identical with respect to all oblique wave directions, the stability eigenvalue problem for unstable three-dimensional wave modes may be reduced to an equivalent problem for two-dimensional modes. The results for isotropic-material walls show that three-dimensional Tollmien–Schlichting instability modes are more dominant than their two-dimensional counterparts when the walls are sufficiently compliant. The critical Reynolds number for Tollmien-Schlichting instability may be given by three-dimensional modes. Furthermore, for highly compliant walls, calculations based solely on two-dimensional modes are likely to underestimate the maximum disturbance growth factor needed for transition prediction and correlation. However, because the disturbance growth rates on highly compliant walls are much lower than those on a rigid wall, significant delay of transition may still be possible provided compliance-induced instabilities are properly suppressed. Walls featuring material anisotropy which have reduced stiffness to shear deformation in the transverse and oblique planes are also investigated. Such anisotropy is found to be effective in reducing the growth rates of the three-dimensional modes relative to those of the two-dimensional modes.

Turbulence characteristics of the boundary layer on a rotating disk

1994 ◽  
Vol 266 ◽  
pp. 175-207 ◽  
Author(s):  
Howard S. Littell ◽  
John K. Eaton
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Reynolds Stress ◽  
Structural Model ◽  
Rotating Disk ◽  
Two Dimensional ◽  
Mean Flow ◽  
Velocity Correlation ◽  
Dimensional Boundary ◽  
The Mean

Measurements of the boundary layer on an effectively infinite rotating disk in a quiescent environment are described for Reynolds numbers up to Reδ2 = 6000. The mean flow properties were found to resemble a ‘typical’ three-dimensional crossflow, while some aspects of the turbulence measurements were significantly different from two-dimensional boundary layers that are turned. Notably, the ratio of the shear stress vector magnitude to the turbulent kinetic energy was found to be at a maximum near the wall, instead of being locally depressed as in a turned two-dimensional boundary layer. Also, the shear stress and the mean strain rate vectors were found to be more closely aligned than would be expected in a flow with this degree of crossflow. Two-point velocity correlation measurements exhibited strong asymmetries which are impossible in a two-dimensional boundary layer. Using conditional sampling, the velocity field surrounding strong Reynolds stress events was partially mapped. These data were studied in the light of the structural model of Robinson (1991), and a hypothesis describing the effect of cross-stream shear on Reynolds stress events is developed.

A two-dimensional boundary layer encountering a three-dimensional hump

1977 ◽  
Vol 83 (1) ◽  
pp. 163-176 ◽  
Author(s):  
F. T. Smith ◽  
R. I. Sykes ◽  
P. W. M. Brighton
Keyword(s):  
Boundary Layer ◽  
Constant Width ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Flow Properties ◽  
Nonlinear Motion ◽  
Dimensional Boundary ◽  
Incompressible Boundary ◽  
Insight Into ◽  
Steady Laminar

A shallow three-dimensional hump disturbs the two-dimensional incompressible boundary layer developed on an otherwise flat surface. The steady laminar flow is studied by means of a three-dimensional extension of triple-deck theory, so that there is the prospect of separation in the nonlinear motion. As a first step, however, a linearized analysis valid for certain shallow obstacles gives some insight into the flow properties. The most striking features then are the reversal of the secondary vortex motions and the emergence of a ‘corridor’ in the wake of the hump. The corridor stays of constant width downstream and within it the boundary-layer displacement and skin-friction perturbation are much greater than outside. Extending outside the corridor, there is a zone where the surface fluid is accelerated, in contrast with the deceleration near the centre of the corridor. The downstream decay (e.g. of displacement) here is much slower than in two-dimensional flows.

Sign in / Sign up

Export Citation Format

Share Document