Host preferences of low-trunk vascular epiphytes in a cloud forest of Veracruz, Mexico

2005 ◽  
Vol 21 (6) ◽  
pp. 651-660 ◽  
Author(s):  
Klaus Mehltreter ◽  
Alejandro Flores-Palacios ◽  
José G. García-Franco
Keyword(s):  
Water Retention ◽  
Cloud Forest ◽  
Water Retention Capacity ◽  
Retention Capacity ◽  
Host Preferences ◽  
Host Group ◽  
Vascular Epiphytes ◽  
Lower Trunk ◽  
Tree Ferns ◽  
Epiphyte Species

The diversity, abundance and frequency of vascular epiphytes on the lower trunk were compared between two host groups of a Mexican cloud forest: angiosperm trees (n = 72) and tree ferns (n = 28). The bark of the five most frequent host trees and the root mantle of the two tree ferns were analysed for their thickness, water content, water retention capacity and pH. A total of 55 epiphyte species and 910 individuals were found on the 27 host species. On hosts with a dbh range of 5–10 cm, epiphytes were significantly more diverse (4.3±0.9 species per host) and more abundant (12.5±2.2 individuals per host) on tree ferns than on angiosperm trees (1.9±0.2 species per host and 3.9±0.6 individuals per host). However, these differences were not significant for the dbh class of 10–20 cm, because epiphyte numbers increased on angiosperm trees with larger host size, but not in tree ferns. Most epiphyte species had no preference for any host group, but four species were significantly more frequent on tree ferns and two species on angiosperm trees. The higher epiphyte diversity and abundance on tree fern trunks of the smallest dbh class is attributed to their presumably greater age and to two stem characteristics, which differed significantly between host groups, the thicker root mantle and higher water retention capacity of tree ferns. These bark characteristics may favour germination and establishment of epiphytes.

scholarly journals Chemical Composition and Functional Properties of Dietary Fibre Concentrates from Winemaking By-Products: Skins, Stems and Lees

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1510
Author(s):  
María Ángeles Rivas ◽  
Rocío Casquete ◽  
María de Guía Córdoba ◽  
Santiago Ruíz-Moyano ◽  
María José Benito ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Functional Properties ◽  
Dietary Fibre ◽  
Water Retention ◽  
Point Of View ◽  
Water Retention Capacity ◽  
Retention Capacity ◽  
Oil Retention ◽  
High Antioxidant Activity ◽  
By Products

The objective of this study was to evaluate, from a technological and nutritional point of view, the chemical composition and functional properties of the industrial winemaking by-products, namely skins, stems and lees. The chemical and physical characteristics, as well as the functional properties (fat and water retention and swelling capacity, antioxidant capacity, and their prebiotic effect), of the dietary fibre of these by-products were studied. The results showed that the skins, stems, and lees are rich in fibre, with the stem fibre containing the highest amounts of non-extractable polyphenols attached to polysaccharides with high antioxidant activity and prebiotic effect. Lee fibre had the highest water retention capacity and oil retention capacity. The results reveal that winemaking by-products could be used as a source of dietary fibre with functional characteristics for food applications.

Effect of boiling on nutritional, antioxidant and physicochemical properties of edible plants (Malva parviflora and Myrtillocactus geometrizans)

2021 ◽  
pp. 510
Author(s):  
Sandoval-Gallegos Eli Mireya ◽  
Arias-Rico José ◽  
Cruz-Cansino Nelly del Socorro ◽  
Ramírez-Ojeda Deyanira ◽  
Zafra-Rojas Quinatzin Yadira ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Physicochemical Properties ◽  
Antioxidant Capacity ◽  
Water Retention ◽  
Nutritional Composition ◽  
Total Phenolic ◽  
Water Retention Capacity ◽  
Total Phenolic Compounds ◽  
Retention Capacity ◽  
Malva Parviflora

The aim of the present research was to determine the effect of boiling on nutritional composition, total phenolic compounds, antioxidant capacity, physicochemical and morphological characteristics of two edible plants Malva parviflora (mallow leaf) and Myrtillocactus geometrizans (garambullo flower). The plants had an important nutritional composition as carbohydrates (48-70 %), dietary fiber (36-42 %) and protein (13 %), as well as total phenolic compounds (468-750 mg GAE/100 g db) with a high antioxidant capacity. However, boiling originated the decrease of soluble compounds, carbohydrates, total phenolic compounds, antioxidant capacity and physicochemical properties. Plants changed to dark colors and physicochemical properties were affected, except to water retention capacity, oil retention capacity and viscosity, which had the same values in mallow leaves (raw and boiled), but increased water retention capacity in garambullo flowers, it may be by changes in the morphology observed. Therefore, is to suggest the raw consumption or with minimal cooking of these plants to avoid changes caused by thermal treatment.

Effect of Storage Time on the Physicochemical and Sensory Properties of Man-tou (Chinese Steamed Bread)

2007 ◽  
Vol 3 (3) ◽  
Author(s):  
Kun Sha ◽  
Ping Qian ◽  
Li-Jun Wang ◽  
Zhan-hui Lu ◽  
Li-Te Li
Keyword(s):  
Water Retention ◽  
Storage Time ◽  
Soluble Starch ◽  
Prolonged Storage ◽  
Water Retention Capacity ◽  
Study Quality ◽  
Total Water ◽  
Retention Capacity ◽  
Steamed Bread

In this study, quality of Man-tou, the Chinese traditional steamed bread during storage was studied. Values for water retention capacity, total water solubles, soluble starch, and soluble amylose and amylopectin of Man-tou decreased with storage time. Results showed that hardness, chewiness and gumminess of Man-tou increased, while, springiness cohesiveness and resilience decreased along with prolonged storage time (p<0.05). Sensory evaluation results showed that all sensory rating of Man-tou, including softness, stickiness, cohesiveness, elasticity, taste and total score, dropped drastically within 24 h of storage time (p<0.05). Differential Scanning Calorimeter (DSC) was used to determine crystalline structure of amylopectin in Man-tou, and the value for enthalpy of crystallization was found increased with storage time. Amylopectin crystallization was significantly associated to Man-tou firming (p<0.01).

scholarly journals Cowpea bean production under water stress using hydrogels

2017 ◽  
Vol 47 (1) ◽  
pp. 87-92 ◽  
Author(s):  
Marília Barcelos Souza Lopes ◽  
Taynar Coelho de Oliveira Tavares ◽  
Danilo Alves Veloso ◽  
Niléia Cristina da Silva ◽  
Rodrigo Ribeiro Fidelis
Keyword(s):  
Water Stress ◽  
Water Use ◽  
Food Production ◽  
Water Retention ◽  
Block Design ◽  
Population Increase ◽  
Water Retention Capacity ◽  
Yield Losses ◽  
Retention Capacity ◽  
Randomized Block Design

ABSTRACT The population increase and the need of intensifying food production, coupled with the scarcity of water resources, have led to the search of alternatives that reduce consumption and optimize the water use during cultivation. In this context, hydrogels become a strategy in agricultural management, due to their water retention capacity in the soil and availability to plants. This study aimed at evaluating the efficiency of hydrogels on the development and production of cowpea bean ('Sempre-verde' cultivar) under water stress, in a greenhouse. The experiment was performed in a randomized block design, with five replications, in a 4 x 5 factorial scheme, consisting of four types of hydrogel (Hydroplan-EB HyA, with granulometry of 1-3 mm; Hydroplan-EB HyB, with granulometry of 0.5-1 mm; Hydroplan-EB HyC, with granulometry < 0.5 mm; Polim-Agri, with granulometry of 1-0.5 mm) and five concentrations (0 g pot-1; 1.5 g pot-1; 3 g pot-1; 4.5 g pot-1; 6 g pot-1). The following traits were evaluated: number of pods per plant, number of grains per pod and grain yield. The highest concentration (6 g pot-1) resulted in a higher number of pods and yield for all the hydrogels, especially for HyC and Polim-Agro, which presented 7.4 pods plant-1 and 7.0 pods plant-1, with yield of 15.43 g plant-1 and 16.68 g plant-1, respectively. The use of hydrogel shows to be efficient for reducing yield losses under water stress.

Properties and Management of Allophanic Soils

2003 ◽  
Author(s):  
Anthony S. R. Juo ◽  
Kathrin Franzluebbers
Keyword(s):  
Water Content ◽  
Bulk Density ◽  
Water Retention ◽  
Field Capacity ◽  
High Water ◽  
Soil Porosity ◽  
Water Retention Capacity ◽  
Soil Taxonomy ◽  
Retention Capacity ◽  
High Soil

Allophanic soils are dark-colored young soils derived mainly from volcanic ash. These soils typically have a low bulk density (< 0.9 Mg/m3), a high water retention capacity (100% by weight at field capacity), and contain predominantly allophanes, imogolite, halloysite, and amorphous Al silicates in the clay fraction. These soils are found in small, restricted areas with volcanic activity. Worldwide, there are about 120 million ha of allophanic soils, which is about 1% of the Earth's ice-free land surface. In tropical regions, allophanic soils are among the most productive and intensively used agricultural soils. They occur in the Philippines, Indonesia, Papua New Guinea, the Caribbean and South Pacific islands, East Africa, Central America, and the Andean rim of South America. Allophanic soils are primarily Andisols and andic Inceptisols, Entisols, Mollisols, and Alfisols according to the Soil Taxonomy classification. Allophanic soils generally have a dark-colored surface soil, slippery or greasy consistency, a predominantly crumb and granular structure, and a low bulk density ranging from 0.3 to 0.8 Mg/m3. Although allophanic soils are apparently well-drained, they still have a very high water content many days after rain. When the soil is pressed between fingers, it gives a plastic, greasy, but non-sticky sensation of a silty or loamy texture. When dry, the soil loses its greasiness and becomes friable and powdery. The low bulk density of allophanic soils is closely related to the high soil porosity. For example, moderately weathered allophanic soils typically have a total porosity of 78%, with macro-, meso-, and micropores occupying 13%, 33%, and 32%, respectively. Water retained in the mesopores is readily available for plant uptake. Water retained in the micropores is held strongly by soil particles and is not readily available for plant use. The macropores provide soil aeration and facilitate water infiltration. The high water retention capacity is also associated with the high soil porosity. In allophanic soils formed under a humid climate, especially those containing large amounts of allophane, the moisture content at field capacity can be as high as 300%, calculated on a weight basis. Such extremely high values of water content seem misleading.

Short-term steam treatment of MFC gel with and without water-soluble cellulose derivative

2019 ◽  
Vol 34 (1) ◽  
pp. 10-18
Author(s):  
Salla Hiltunen ◽  
Isto Heiskanen ◽  
Kaj Backfolk
Keyword(s):  
Thermal Treatment ◽  
Water Retention ◽  
Crystallinity Index ◽  
Water Soluble ◽  
Steam Treatment ◽  
Water Retention Capacity ◽  
Shear Forces ◽  
Short Term ◽  
Retention Capacity ◽  
Jet Cooking

Abstract Microfibrillated cellulose (MFC) with and without added CMC was exposed to short-term dynamic thermal treatment using a steam jet cooker. The effects of the elevated temperature (130 °C, ∼3 bar) and shear forces on the rheology, crystallinity index, UV/VIS adsorption and water retention were measured. Jet cooking increased the viscosity and gel strength of the MFC and MFC/CMC mixture but with CMC alone a slight decrease in viscosity was observed. The water retention capacity and crystalline indices of the MFC were not greatly affected by the short-term thermal treatment and shear forces, although a slight increase in the UV/VIS absorbance was observed.

Sign in / Sign up

Export Citation Format

Share Document