A High Angle, Double Tilting Cold Stage for the AEI EM7

1974 ◽  
Vol 32 ◽  
pp. 450-451
Author(s):  
P.R. Swann ◽  
A.E. Lloyd
Keyword(s):  
Habit Plane ◽  
Temperature Control ◽  
Tilt Angle ◽  
Cooling System ◽  
Thermal Drift ◽  
High Angle ◽  
Cold Stage ◽  
High Degree ◽  
Better Than

Figure 1 shows the design of a specimen stage used for the in situ observation of phase transformations in the temperature range between ambient and −160°C. The design has the following features a high degree of specimen stability during tilting linear tilt actuation about two orthogonal axes for accurate control of tilt angle read-out high angle tilt range for stereo work and habit plane determination simple, robust construction temperature control of better than ±0.5°C minimum thermal drift and transmission of vibration from the cooling system.

Water accumulation as a function of temperature on specimens in an electron microscope cold stage

1986 ◽  
Vol 44 ◽  
pp. 114-115 ◽  
Author(s):  
M.K. Lamvik ◽  
D.A. Kopf ◽  
S.D. Davilla ◽  
J.D. Robertson
Keyword(s):  
Electron Microscope ◽  
Mass Loss ◽  
Liquid Helium ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Liquid Helium Temperature ◽  
Helium Temperature ◽  
Cold Stage ◽  
Water Accumulation ◽  
Better Than

Last year we reported1 that there is a striking reduction in the rate of mass loss when a specimen is observed at liquid helium temperature. It is important to determine whether liquid helium temperature is significantly better than liquid nitrogen temperature. This requires a good understanding of mass loss effects in cold stages around 100K.

STUDIES ON THE AROMATISATION OF NEUTRAL STEROIDS IN PREGNANT WOMEN

1964 ◽  
Vol 45 (4) ◽  
pp. 535-559 ◽  
Author(s):  
E. Bolté ◽  
S. Mancuso ◽  
G. Eriksson ◽  
N. Wiqvist ◽  
E. Diczfalusy
Keyword(s):  
Pregnant Women ◽  
Comparative Studies ◽  
Chorionic Gonadotrophin ◽  
Human Chorionic Gonadotrophin ◽  
Radioactive Material ◽  
Placental Barrier ◽  
Therapeutic Abortion ◽  
Limited Ability ◽  
Better Than

ABSTRACT In 15 cases of therapeutic abortion by laparotomy the placenta was disconnected from the foetus and perfused in situ with tracer amounts of radioactive dehydroepiandrosterone (DHA), dehydroepiandrosterone sulphate (DHAS), androst-4-ene-3,17-dione (A), testosterone (T) and 17β-oestradiol (OE2). Analysis of the placentas, perfusates and urine samples revealed an extensive aromatisation of DHA, A and T; more than 70% of the radioactive material recovered was phenolic, and at least 80 % of this phenolic material was identified as oestrone (OE1), 17β-oestradiol (OE2) and oestriol (OE3), the latter being detected only in the urine. Comparative studies indicated that A and T were aromatised somewhat better than DHA and that all three unconjugated steroids were aromatised to a much greater extent than DHAS. Radioactive OE1 and OE2 were isolated and identified in the placentas and perfusates, but no OE3, epimeric oestriols, or ring D ketols could be detected in these sources, not even when human chorionic gonadotrophin (HCG) was added to the blood prior to perfusion. Lack of placental 16-hydroxylation was also apparent when OE2 was perfused. Regardless of the precursor perfused, there was three times more OE2 than OE1 in the placenta and three times more OE1 than OE2 in the perfusate. This was also the case following perfusion with OE2. The results are interpreted as suggesting the existence in the pregnant human of a placental »barrier« limiting the passage of circulating androgen. The barrier consists of a) limited ability to transfer directly DHAS and b) an enzymic mechanism resulting in the rapid and extensive aromatisation of the important androgens DHA, A and T.

TRACERS DERIVED IN SITU REPLICATE AND MIX BETTER THAN FALLOUT TRACERS INCORPORATED INTO GRAIN COATINGS

2017 ◽  
Author(s):  
Amanda H. Schmidt ◽  
◽  
Paul R. Bierman ◽  
Veronica Sosa-Gonzalez ◽  
Thomas B. Neilson ◽  
...  
Keyword(s):  
Better Than

A simplified method of temperature control maximizing productivity of the batch reactor; The effect of inertia of the cooling system

1982 ◽  
Vol 47 (2) ◽  
pp. 454-464 ◽  
Author(s):  
František Jiráček ◽  
Josef Horák
Keyword(s):  
Mathematical Model ◽  
Temperature Control ◽  
Cooling System ◽  
Batch Reactor ◽  
Exothermic Reaction ◽  
Cooling Capacity ◽  
Variable Activity ◽  
Simplified Method ◽  
Opening And Closing ◽  
Time Of Operation

The effect has been studied of the inertia of the cooling system on the reliability of control of the temperature of the reaction mixture. The study has been made using a mathematical model of the batch reactor with an exothermic reaction. The temperature has been controlled by a two-level controller opening and closing the flow of the coolant. The aim of the control has been to maintain a constant value of the degree of utilization of the cooling capacity of the reactor. The instantaneous value of the degree of utilization has been assessed from the ratio of times for which the cooling system is idle to the time of operation. The reliability of control has been studied for variable activity of the catalyst.

scholarly journals Advertising Media Impact in Consumer Buying Behavior

2019 ◽  
Vol 8 ◽  
pp. 54-56
Author(s):  
Ashmita Dahal Chhetri
Keyword(s):  
Consumer Behavior ◽  
Young Male ◽  
Electronic Media ◽  
Buying Behavior ◽  
Media Impact ◽  
High Degree ◽  
The Impact ◽  
Buying Behaviors ◽  
The Relationship ◽  
Better Than

Advertisements have been used for many years to influence the buying behaviors of the consumers. Advertisements are helpful in creating the awareness and perception among the customers of a product. This particular research was conducted on the 100 young male and female who use different brands of product to check the influence of advertisement on their buying behavior while creating the awareness and building the perceptions. Correlation, regression and other statistical tools were used to identify the relationship between these variables. The results revealed that the relationship between media and consumer behavior is positive. The adve1tising impact on sales and there is positive and high degree relationship between advertising and consumer behavior. The impact on advertising of a product of electronic media is better than non-electronic media.

scholarly journals Correction: Temperature control in DRIFT cells used for in situ and operando studies: where do we stand today?

2020 ◽  
Vol 22 (47) ◽  
pp. 27912-27912
Author(s):  
Ignacio Melián-Cabrera
Keyword(s):  
Temperature Control ◽  
Chem Phys ◽  
Phys Chem Chem Phys ◽  
Operando Studies

Correction for ‘Temperature control in DRIFT cells used for in situ and operando studies: where do we stand today?’ by Ignacio Melián-Cabrera, Phys. Chem. Chem. Phys., 2020, DOI: 10.1039/d0cp04352d.

scholarly journals Performance of the SoLid reactor neutrino detector

2019 ◽  
Vol 219 ◽  
pp. 08003
Author(s):  
Maja Verstraeten
Keyword(s):  
Quality Control ◽  
Energy Resolution ◽  
Neutrino Detector ◽  
Channel Response ◽  
In Situ Calibration ◽  
Reactor Neutrino ◽  
Li Isotope ◽  
Better Than

The SoLid Collaboration is currently operating a 1.6 ton neutrino detector near the Belgian BR2 reactor. Its main goal is the observation of the oscillation of electron antineutrinos to previously undetected flavour states. The highly segmented SoLid detector employs a compound scintillation technology based on PVT scintillator in combination with LiF-ZnS(Ag) screens containing the 6Li isotope. The experiment has demonstrated a channel-to-channel response that can be controlled to the level of a few percent, an energy resolution of better than 14% at 1 MeV, and a determination of the interaction vertex with a precision of 5 cm. This contribution highlights the major outcomes of the R&D program, the quality control during component manufacture and integration, the current performance and stability of the full-scale system, as well as the in-situ calibration of the detector with various radioactive sources.

Strategies for data center temperature control during a cooling system outage

2014 ◽  
Vol 73 ◽  
pp. 146-152 ◽  
Author(s):  
Mi Lin ◽  
Shuangquan Shao ◽  
Xuanhang (Simon) Zhang ◽  
James W. VanGilder ◽  
Victor Avelar ◽  
...  
Keyword(s):  
Temperature Control ◽  
Data Center ◽  
Cooling System

Test Methods for Mechanical Properties of Structural Adhesives

2010 ◽  
Vol 97-101 ◽  
pp. 814-817 ◽  
Author(s):  
Jun Deng
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Shear Strength ◽  
Elastic Modulus ◽  
Butt Joint ◽  
Test Methods ◽  
Joint Specimen ◽  
Lap Shear ◽  
Better Than

One of the greatest drawbacks to predicting the behaviour of bonded joints has been the lack of reliable data on the mechanical properties of adhesives. In this study, methods for determining mechanical properties of structural adhesive were discussed. The Young’s modulus, Poisson’s ratio and tensile strength of the adhesive were tested by dogbone specimens (bulk form) and butt joint specimens (in situ form). The shear modulus and shear strength were test by V-notched specimens (bulk form) and thick adherend lap-shear (TALS) joint specimens (in situ form). The test results show that the elastic modulus provided by the manufacturer is too low, the dogbone specimen is better than the butt joint specimen to test the tensile strength and elastic modulus and the TALS joint specimen is better than the V-notched specimen to test the shear strength.

Sign in / Sign up

Export Citation Format

Share Document