Well-dispersed nanoscale zero-valent iron (NZVI) supported inside the pores of macroporous silica foams (MOSF) composites (Mx-NZVI) has been prepared as the Cr(VI) adsorbent by simply impregnating the MOSF matrix with ferric chloride, followed by the chemical reduction with NaHB4 in aqueous solution at ambient atmosphere. Through the support of MOSF, the reactivity and stability of NZVI are greatly improved. Transmission electron microscopy (TEM) results show that NZVI particles are spatially well-dispersed with a typical core-shell structure and supported inside MOSF matrix. The N2 adsorption-desorption isotherms demonstrate that the Mx-NZVI composites can maintain the macroporous structure of MOSF and exhibit a considerable high surface area (503 m2·g−1). X-ray photoelectron spectroscopy (XPS) and powder X-ray diffraction (XRD) measurements confirm the core-shell structure of iron nanoparticles composed of a metallic Fe0 core and an Fe(II)/Fe(III) species shell. Batch experiments reveal that the removal efficiency of Cr(VI) can reach 100% when the solution contains 15.0 mg·L−1 of Cr(VI) at room temperature. In addition, the solution pH and the composites dosage can affect the removal efficiency of Cr(VI). The Langmuir isotherm is applicable to describe the removal process. The kinetic studies demonstrate that the removal of Cr(VI) is consistent with pseudo-second-order kinetic model.
Well-Dispersed Nanoscale Zero-Valent Iron Supported in Macroporous Silica Foams: Synthesis, Characterization, and Performance in Cr(VI) Removal