N/S-Heterocyclic Contaminant Removal from Fuels by the Mesoporous Metal–Organic Framework MIL-100: The Role of the Metal Ion

2013 ◽  
Vol 135 (26) ◽  
pp. 9849-9856 ◽  
Author(s):  
Ben Van de Voorde ◽  
Mohammed Boulhout ◽  
Frederik Vermoortele ◽  
Patricia Horcajada ◽  
Denise Cunha ◽  
...  
Author(s):  
Simon Krause ◽  
Jack D. Evans ◽  
Volodymyr Bon ◽  
Irena Senkovska ◽  
François-Xavier Coudert ◽  
...  

In this contribution, we present an extensive investigation of adsorption of a range of different gases at various temperatures in DUT-49, a metal-organic framework which features a negative gas adsorption (NGA) transition. Adsorption experiments at temperatures ranging from 21 to 308 K, were used to identify, for each guest, a critical temperature range in which NGA occurs. The experimental results were complemented by molecular simulations that rationalize the absence of NGA at elevated temperatures and the non-monotonic behavior observed upon temperature decrease.


Author(s):  
Simon Krause ◽  
Jack D. Evans ◽  
Volodymyr Bon ◽  
Irena Senkovska ◽  
François-Xavier Coudert ◽  
...  

Adsorption-induced contraction and negative gas adsorption in the mesoporous metal–organic framework DUT-49 for different gases and temperatures.


2020 ◽  
Author(s):  
Simon Krause ◽  
Jack D. Evans ◽  
Volodymyr Bon ◽  
Irena Senkovska ◽  
François-Xavier Coudert ◽  
...  

In this contribution, we present an extensive investigation of adsorption of a range of different gases at various temperatures in DUT-49, a metal-organic framework which features a negative gas adsorption (NGA) transition. Adsorption experiments at temperatures ranging from 21 to 308 K, were used to identify, for each guest, a critical temperature range in which NGA occurs. The experimental results were complemented by molecular simulations that rationalize the absence of NGA at elevated temperatures and the non-monotonic behavior observed upon temperature decrease.


2019 ◽  
Author(s):  
Timothée Stassin ◽  
Ivo Stassen ◽  
Joao Marreiros ◽  
Alexander John Cruz ◽  
Rhea Verbeke ◽  
...  

A simple solvent- and catalyst-free method is presented for the synthesis of the mesoporous metal-organic framework (MOF) MAF-6 (RHO-Zn(eIm)2) based on the reaction of ZnO with 2-ethylimidazole vapor at temperatures ≤ 100 °C. By translating this method to a chemical vapor deposition (CVD) protocol, mesoporous crystalline films could be deposited for the first time entirely from the vapor phase. A combination of PALS and Kr physisorption measurements confirmed the porosity of these MOF-CVD films and the size of the MAF-6 supercages (diam. ~2 nm), in close agreement with powder data and calculations. MAF-6 powders and films were further characterized by XRD, TGA, SEM, FTIR, PDF and EXAFS. The exceptional uptake capacity of the mesoporous MAF-6 in comparison to the microporous ZIF-8 is demonstrated by vapor-phase loading of a molecule larger than the ZIF-8 windows.


2019 ◽  
Vol 142 (2) ◽  
pp. 999-1009 ◽  
Author(s):  
Emil S. Gutterød ◽  
Andrea Lazzarini ◽  
Torstein Fjermestad ◽  
Gurpreet Kaur ◽  
Maela Manzoli ◽  
...  

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
José María Rivera ◽  
Susana Rincón ◽  
Cherif Ben Youssef ◽  
Alejandro Zepeda

Mesoporous metal-organic framework-5 (MOF-5), with the composition Zn4O(BDC)3, showed a high capacity for the adsorptive removal of Pb(II) from 100% aqueous media. After the adsorption process, changes in both morphology and composition were detected using a scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) system, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) analysis. The experimental evidence showed that Zn(II) liberation from MOF-5 structure was provoked by the water effect demonstrating that Pb(II) removal is not due to ionic exchange with Zn. A kinetic study showed that Pb(II) removal was carried out in 30 min with a behavior of pseudo-second-order kinetic model. The experimental data on Pb(II) adsorption were adequately fit by both the Langmuir and BET isotherm models with maximum adsorption capacities of 658.5 and 412.7 mg/g, respectively, at pH 5 and 45°C. The results of this work demonstrate that the use of MOF-5 has great potential for applications in environmental protection, especially regarding the removal of the lead present in industrial wastewaters and tap waters.


Adsorption ◽  
2021 ◽  
Author(s):  
Paulo G. M. Mileo ◽  
Diony N. Gomes ◽  
Daniel V. Gonçalves ◽  
Sebastião M. P. Lucena

2012 ◽  
Vol 48 (27) ◽  
pp. 3297 ◽  
Author(s):  
Daqiang Yuan ◽  
Rachel B. Getman ◽  
Zhangwen Wei ◽  
Randall Q. Snurr ◽  
Hong-Cai Zhou

Sign in / Sign up

Export Citation Format

Share Document