scholarly journals Dimension control of in situ fabricated CsPbClBr2 nanocrystal films toward efficient blue light-emitting diodes

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Chenhui Wang ◽  
Dengbao Han ◽  
Junhui Wang ◽  
Yingguo Yang ◽  
Xinyue Liu ◽  
...  
Keyword(s):  
Quantum Well ◽  
Light Emitting Diodes ◽  
Blue Emission ◽  
Light Emitting ◽  
Mixed Ligands ◽  
Dimension Control ◽  
Nanocrystal Films ◽  
Width Distribution ◽  
Quantum Well Width

AbstractIn the field of perovskite light-emitting diodes (PeLEDs), the performance of blue emissive electroluminescence devices lags behind the other counterparts due to the lack of fabrication methodology. Herein, we demonstrate the in situ fabrication of CsPbClBr2 nanocrystal films by using mixed ligands of 2-phenylethanamine bromide (PEABr) and 3,3-diphenylpropylamine bromide (DPPABr). PEABr dominates the formation of quasi-two-dimensional perovskites with small-n domains, while DPPABr induces the formation of large-n domains. Strong blue emission at 470 nm with a photoluminescence quantum yield up to 60% was obtained by mixing the two ligands due to the formation of a narrower quantum-well width distribution. Based on such films, efficient blue PeLEDs with a maximum external quantum efficiency of 8.8% were achieved at 473 nm. Furthermore, we illustrate that the use of dual-ligand with respective tendency of forming small-n and large-n domains is a versatile strategy to achieve narrow quantum-well width distribution for photoluminescence enhancement.

(In)AlGaN deep ultraviolet light emitting diodes with optimized quantum well width

2010 ◽  
Vol 207 (9) ◽  
pp. 2198-2200 ◽  
Author(s):  
Tim Kolbe ◽  
Toni Sembdner ◽  
Arne Knauer ◽  
Viola Kueller ◽  
Hernan Rodriguez ◽  
...  
Keyword(s):  
Quantum Well ◽  
Ultraviolet Light ◽  
Light Emitting Diodes ◽  
Light Emitting ◽  
Quantum Well Width ◽  
Deep Ultraviolet ◽  
Ultraviolet Light Emitting Diodes

Influence of substrate dislocation density and quantum well width on the quantum efficiency of violet-emitting GaInN/GaN light-emitting diodes

2009 ◽  
Vol 6 (S2) ◽  
pp. S833-S836 ◽  
Author(s):  
Thorsten Passow ◽  
Markus Maier ◽  
Michael Kunzer ◽  
Crenguta-Columbina Leancu ◽  
Shangjing Liu ◽  
...  
Keyword(s):  
Dislocation Density ◽  
Quantum Well ◽  
Quantum Efficiency ◽  
Light Emitting Diodes ◽  
Light Emitting ◽  
Quantum Well Width ◽  
Influence Of Substrate

Low-Temperature Operation of Green, Blue and UV InGaN/GaN Multiple-Quantum-Well Light-Emitting Diodes

2003 ◽  
Vol 764 ◽  
Author(s):  
X. A. Cao ◽  
S. F. LeBoeuf ◽  
J. L. Garrett ◽  
A. Ebong ◽  
L. B. Rowland ◽  
...  
Keyword(s):  
Quantum Well ◽  
Light Emitting Diodes ◽  
Multiple Quantum Well ◽  
Light Output ◽  
Localized States ◽  
Multiple Quantum ◽  
Nonradiative Recombination ◽  
Light Emitting ◽  
Temperature Range ◽  
Green Leds

Absract:Temperature-dependent electroluminescence (EL) of InGaN/GaN multiple-quantum-well light-emitting diodes (LEDs) with peak emission energies ranging from 2.3 eV (green) to 3.3 eV (UV) has been studied over a wide temperature range (5-300 K). As the temperature is decreased from 300 K to 150 K, the EL intensity increases in all devices due to reduced nonradiative recombination and improved carrier confinement. However, LED operation at lower temperatures (150-5 K) is a strong function of In ratio in the active layer. For the green LEDs, emission intensity increases monotonically in the whole temperature range, while for the blue and UV LEDs, a remarkable decrease of the light output was observed, accompanied by a large redshift of the peak energy. The discrepancy can be attributed to various amounts of localization states caused by In composition fluctuation in the QW active regions. Based on a rate equation analysis, we find that the densities of the localized states in the green LEDs are more than two orders of magnitude higher than that in the UV LED. The large number of localized states in the green LEDs are crucial to maintain high-efficiency carrier capture at low temperatures.

scholarly journals Solution-Processed Efficient Blue Phosphorescent Organic Light-Emitting Diodes (PHOLEDs) Enabled by Hole-Transport Material Incorporated Single Emission Layer

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 554
Author(s):  
Taeshik Earmme
Keyword(s):  
Light Emitting Diodes ◽  
Blue Emission ◽  
Hole Transport ◽  
Organic Light Emitting Diodes ◽  
Emission Layer ◽  
Solution Processed ◽  
Light Emitting ◽  
Organic Light ◽  
Single Emission ◽  
Blue Phosphorescent

Solution-processed blue phosphorescent organic light-emitting diodes (PHOLEDs) based on a single emission layer with small-molecule hole-transport materials (HTMs) are demonstrated. Various HTMs have been readily incorporated by solution-processing to enhance hole-transport properties of the polymer-based emission layer. Poly(N-vinylcarbazole) (PVK)-based blue emission layer with iridium(III) bis(4,6-(di-fluorophenyl)pyridinato-N,C2′)picolinate (FIrpic) triplet emitter blended with solution-processed 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) gave luminous efficiency of 21.1 cd/A at a brightness of 6220 cd/m2 with an external quantum efficiency (EQE) of 10.6%. Blue PHOLEDs with solution-incorporated HTMs turned out to be 50% more efficient compared to the reference device without HTMs. The high hole mobility, high triplet energy of HTM, and favorable energy transfer between HTM blended PVK host and FIrpic blue dopant were found to be important factors for achieving high device performance. The results are instructive to design and/or select proper hole-transport materials in solution-processed single emission layer.

High-Bright InGaN Multiple-Quantum-Well Blue Light-Emitting Diodes on Si (111) Using AlN/GaN Multilayers with a Thin AlN/AlGaN Buffer Layer

2003 ◽  
Vol 42 (Part 2, No. 3A) ◽  
pp. L226-L228 ◽  
Author(s):  
Baijun Zhang ◽  
Takashi Egawa ◽  
Hiroyasu Ishikawa ◽  
Yang Liu ◽  
Takashi Jimbo
Keyword(s):  
Quantum Well ◽  
Buffer Layer ◽  
Blue Light ◽  
Light Emitting Diodes ◽  
Multiple Quantum Well ◽  
Multiple Quantum ◽  
Light Emitting ◽  
Algan Buffer

Four color stacked white organic light-emitting diodes utilizing the concept of triplet harvesting

2011 ◽  
Vol 1286 ◽  
Author(s):  
Th. C. Rosenow ◽  
S. Olthof ◽  
S. Reineke ◽  
B. Lüssem ◽  
K. Leo
Keyword(s):  
Light Emitting Diodes ◽  
Blue Emission ◽  
Organic Light Emitting Diodes ◽  
Light Sources ◽  
Emission Layer ◽  
Light Emitting ◽  
Organic Light ◽  
Blue Emitters ◽  
Color Rendering ◽  
Triplet Harvesting

ABSTRACTOrganic light-emitting diodes (OLEDs) are developing into a competitive alternative to conventional light sources. Nevertheless, OLEDs need further improvement in terms of efficiency and color rendering for lighting applications. Fluorescent blue emitters allow deep blue emission and high stability, while phosphorescent blue emitter still suffer from insufficient stability. The concept of triplet harvesting is the key for achieving internal quantum efficiencies up to 100 % and simultaneously benefiting from the advantages of fluorescent blue emitters. Here, we present a stacked OLED consisting of two units comprising four different emitters in total. The first unit takes advantage of the concept of triplet harvesting and combines the light emission of a fluorescent blue and a phosphorescent red emitter. The second unit emits light from a single emission layer consisting of a matrix doped with phosphorescent green and yellow emitters. With this approach, we reach white color coordinates close to the standard illuminant A and a color rendering index of above 75. The presented devices are characterized by high luminous efficacies of above 30 lm/W on standard glass substrates without outcoupling enhancement.

Pyridine-Incorporated Dihexylquaterthiophene: A Novel Blue Emitter for Organic Light Emitting Diodes (OLEDs)

2012 ◽  
Vol 65 (9) ◽  
pp. 1244 ◽  
Author(s):  
Prashant Sonar ◽  
Sonsoles Garcia Santamaria ◽  
Ting Ting Lin ◽  
Alan Sellinger ◽  
Henk Bolink
Keyword(s):  
Light Emitting Diodes ◽  
Blue Emission ◽  
Organic Light Emitting Diodes ◽  
High Yield ◽  
Device Performance ◽  
Host Matrix ◽  
Maximum Brightness ◽  
Light Emitting ◽  
Organic Light ◽  
Processing Techniques

The synthesis and characterisation of 2,5-bis(5′-hexyl-[2,2′-bithiophen]-5-yl)pyridine (Th4PY) and its use as a blue emitter in organic light emitting diodes (OLEDs) is reported. Th4PY was synthesised in high yield using a straightforward Suzuki coupling route with commercially available starting materials. As Th4PY is both soluble and has low molecular weight, blue OLEDs were fabricated using both spin-coating and vacuum deposition thin film processing techniques to study the effect of processing on device performance. OLED devices using a spin-coated layer consisting of 4′,4′′-tris(N-carbazolyl)triphenylamine (TCTA) and 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) as a host matrix together with Th4PY as emitter exhibited highly efficient sky-blue emission with a low turn-on voltage of 3 V, a maximum brightness close to 15000 cd m–2 at 8 V, and a maximum luminous efficiency of 7.4 cd A–1 (6.3 lm W–1) with CIE coordinates of x = 0.212, y = 0.320. The device performance characteristics are compared using various matrices and processing techniques. The promising sky-blue OLED performance, solution processability, and ambient stability make Th4PY a promising blue emitter for application in OLEDs.

Sign in / Sign up

Export Citation Format

Share Document