scholarly journals Switchable wetting of oxygen-evolving oxide catalysts

2021 ◽  
Author(s):  
Tzu-Hsien Shen ◽  
Liam Spillane ◽  
Jiayu Peng ◽  
Yang Shao-Horn ◽  
Vasiliki Tileli
Keyword(s):  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Catalytic Performance ◽  
Single Particles ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
Phase Transmission ◽  
Oxygen Evolving ◽  
Solid Liquid

AbstractThe surface wettability of catalysts is typically controlled via surface treatments that promote catalytic performance. Here we report on potential-regulated hydrophobicity/hydrophilicity at cobalt-based oxide interfaces with an alkaline solution. The switchable wetting of single particles, directly related to their activity and stability towards the oxygen evolution reaction, was revealed by electrochemical liquid-phase transmission electron microscopy. Analysis of the movement of the liquid in real time revealed distinctive wettability behaviour associated with specific potential ranges. At low potentials, an overall reduction of the hydrophobicity of the oxides was probed. Upon reversible reconstruction towards the surface oxyhydroxide phase, electrowetting was found to cause a change in the interfacial capacitance. At high potentials, the evolution of molecular oxygen, confirmed by operando electron energy-loss spectroscopy, was accompanied by a globally thinner liquid layer. This work directly links the physical wetting with the chemical oxygen evolution reaction of single particles, providing fundamental insights into solid–liquid interfacial interactions of oxygen-evolving oxides.

One-Step Synthesis of Rod-Shaped NiFe-MOF as a Highly Efficient Oxygen Evolution Catalyst

NANO ◽  
2019 ◽  
Vol 14 (08) ◽  
pp. 1950101 ◽  
Author(s):  
Dandan Zhang ◽  
Renxing Huang ◽  
Huaming Xie ◽  
Xingyong Liu ◽  
Ying Lei ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Low Cost ◽  
Metal Organic Framework ◽  
Electrochemical Techniques ◽  
Nitrogen Adsorption ◽  
Catalytic Performance ◽  
Highly Efficient ◽  
Transmission Electron

Development of low-cost, highly active catalyst for efficient oxygen evolution reaction based on earth-abundant metals is still a great challenge. Here, we report that a rod-like bimetallic NiFe metal-organic framework (NiFe-MOF) can directly act as a highly efficient oxygen evolution reaction (OER) catalyst synthesized by a convenient-to-operate hydrothermal method. The rod-like NiFe-MOF can derive 10[Formula: see text]mA[Formula: see text]cm[Formula: see text] with a low overpotential of only 26[Formula: see text]mV, and its Tafel slope is 40.82[Formula: see text]mV[Formula: see text]dec[Formula: see text], which is superior to that of monometallic Ni-MOF or Fe-MOF, and even can be comparable to that of RuO2. To identify the origin of enhancing OER activity, we resorted to X-ray diffraction, scanning electron microscope, transmission electron microscope, high resolution transmission electron microscopy image and nitrogen adsorption–desorption techniques and various electrochemical techniques to probe it gingerly. The results indicate that its high electrochemically active area and the synergistic effect of bimetallic node could be responsible for the surprisingly high catalytic performance of the NiFe-MOF. These results suggest that this kind of bimetallic MOF (NiFe-MOF) could be a promising electrocatalyst for oxygen evolution reaction.

Co2P nanoparticle/multi-doped porous carbon nanosheets for the oxygen evolution reaction

2021 ◽  
Author(s):  
Xinxin Sang ◽  
Hengbo Wu ◽  
Nan Zang ◽  
Huilian Che ◽  
Dongyin Liu ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Porous Carbon ◽  
Oxygen Evolution Reaction ◽  
Catalytic Performance ◽  
Carbon Nanosheets

Co2P hybridized with multi-doped carbon nanoleaves is obtained via direct carbonization of ZIF-L/PEI/PA and show good electro-catalytic performance in OER.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

In situ growth of ultrathin Ni–Fe LDH nanosheets for high performance oxygen evolution reaction

2017 ◽  
Vol 4 (7) ◽  
pp. 1173-1181 ◽  
Author(s):  
Haidong Yang ◽  
Sha Luo ◽  
Yun Bao ◽  
Yutong Luo ◽  
Jun Jin ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
High Performance ◽  
Copper Foil ◽  
Catalytic Performance ◽  
In Situ Growth ◽  
Ultrathin Nanosheet

The ultrathin Ni70Fe30LDH nanosheets were successfullyin situgrown on anodic polarized copper foil, denoted as u-Ni70Fe30LDHs/a-CF. Benefiting from the ultrathin nanosheet structure, the catalyst exhibits remarkable catalytic performance for OER in 1 M KOH solution.

scholarly journals Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1332
Author(s):  
Florian Riedlsperger ◽  
Bernadette Gsellmann ◽  
Erwin Povoden-Karadeniz ◽  
Oriana Tassa ◽  
Susanna Matera ◽  
...  
Keyword(s):  
Special Focus ◽  
Scanning Calorimetry ◽  
Transmission Electron Microscopy Analysis ◽  
Computational Framework ◽  
Mobility Data ◽  
Interfacial Energies ◽  
Transmission Electron ◽  
Size Number ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis

A thermokinetic computational framework for precipitate transformation simulations in Ta-containing martensitic Z-steels was developed, including Calphad thermodynamics, diffusion mobility data from the literature, and a kinetic parameter setup that considered precipitation sites, interfacial energies and dislocation density evolution. The thermodynamics of Ta-containing subsystems were assessed by atomic solubility data and enthalpies from the literature as well as from the experimental dissolution temperature of Ta-based Z-phase CrTaN obtained from differential scanning calorimetry. Accompanied by a comprehensive transmission electron microscopy analysis of the microstructure, thermokinetic precipitation simulations with a wide-ranging and well-documented set of input parameters were carried out in MatCalc for one sample alloy. A special focus was placed on modelling the transformation of MX into the Z-phase, which was driven by Cr diffusion. The simulation results showed excellent agreement with experimental data in regard to size, number density and chemical composition of the precipitates, showing the usability of the developed thermokinetic simulation framework.

scholarly journals Morphological changes and bioaccumulation in response to cadmium exposure in Morchella spongiola, a fungus with potential for detoxification

2021 ◽  
Author(s):  
Hongyan Xu ◽  
Jing Guo ◽  
Qing Meng ◽  
Zhanling Xie
Keyword(s):  
Electron Microscopy ◽  
Morphological Changes ◽  
Intracellular Accumulation ◽  
Tolerance Mechanism ◽  
Edible Fungi ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
Microscopy Analysis ◽  
Micro Morphology

<i>Morchella</i> is a genus of edible fungi with strong resistance to Cd and the ability to accumulate it in the mycelium. However, the mechanisms conferring Cd resistance in <i>Morchella</i> are unknown. In the present study, morphological and physiological responses to Cd were evaluated in the mycelia of <i>Morchella spongiola</i>. Variations in hyphal micro-morphology including twisting, folding and kinking in mycelia exposed to different Cd concentrations (0.15, 0.9, 1.5, 2.4, 5.0 mg/L) were observed using scanning electron microscopy. Deposition of Cd precipitates on cell surfaces (at Cd concentrations > 2.4 mg/L) was shown by SEM-EDS. Transmission electron microscopy analysis of cells exposed to different concentrations of Cd revealed the loss of intracellular structures and the localization of Cd depositions inside/outside the cell. FTIR analysis showed that functional groups such as C=O, -OH, -NH and -CH could be responsible for Cd binding on the cell surface of <i>M. spongiola</i>. In addition, intracellular accumulation was observed in cultures at low Cd concentrations (< 0.9 mg/L), while extracellular adsorption occurred at higher concentrations. These results provide valuable information on the Cd tolerance mechanism in <i>M. spongiola</i> and constitute a robust foundation for further studies on fungal bioremediation strategies.

Sign in / Sign up

Export Citation Format

Share Document