scholarly journals The effect of simplifications of a numerical mesh on the results of electromagnetic analysis of the Nuclotron-type cable

2018 ◽  
Vol 177 ◽  
pp. 08004
Author(s):  
Łukasz Tomków
Keyword(s):  
Magnetic Field ◽  
Electric Current ◽  
Current Density ◽  
Electric Current Density ◽  
Electromagnetic Analysis ◽  
First Case ◽  
Single Region ◽  
The Magnetic Field

The model of a single Nuclotron-type cable is presented. The goal of this model is to assess the behaviour of the cable under different loads. Two meshes with different simplifications are applied. In the first case, the superconductor in the cable is modelled as single region. Second mesh considers individual strands of the cable. The significant differences between the distributions of the electric current density obtained with both models are observed. The magnetic field remains roughly similar.

scholarly journals Bifurcation of Jovian magnetotail current sheet

2006 ◽  
Vol 24 (6) ◽  
pp. 1479-1481 ◽  
Author(s):  
P. L. Israelevich ◽  
A. I. Ershkovich
Keyword(s):  
Magnetic Field ◽  
Current Sheet ◽  
Electric Current ◽  
Current Density ◽  
Current Density Distribution ◽  
Field Measurements ◽  
Electric Current Density ◽  
Current Layer ◽  
The Magnetic Field ◽  
Magnetotail Current Sheet

Abstract. Multiple crossings of the magnetotail current sheet by a single spacecraft give the possibility to distinguish between two types of electric current density distribution: single-peaked (Harris type current layer) and double-peaked (bifurcated current sheet). Magnetic field measurements in the Jovian magnetic tail by Voyager-2 reveal bifurcation of the tail current sheet. The electric current density possesses a minimum at the point of the Bx-component reversal and two maxima at the distance where the magnetic field strength reaches 50% of its value in the tail lobe.

scholarly journals Electric current and magnetic field geometry in flapping magnetotail current sheets

2005 ◽  
Vol 23 (4) ◽  
pp. 1391-1403 ◽  
Author(s):  
A. Runov ◽  
V. A. Sergeev ◽  
W. Baumjohann ◽  
R. Nakamura ◽  
S. Apatenkov ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Current Sheet ◽  
Electric Current ◽  
Current Density ◽  
Curvature Vector ◽  
Field Measurements ◽  
Wide Range ◽  
Point Data ◽  
The Magnetic Field ◽  
Half Thickness

Abstract. Using four-point magnetic field measurements by the Cluster spacecraft, we statistically analyze the magnetic field and electric current configurations during rapid crossings of the current sheet observed in July-October 2001 at geocentric distances of 19 RE. The database includes 78 crossings, specially selected to apply multi-point data analysis techniques to calculate vector derivatives. Observed bipolar variations of jz, often with | jz |>jy, indicate that the electric currents follow kinks of the current sheet. The current density varies between 5-25nA/m2. The half-thickness of the current sheet during flapping varies over a wide range, from 1 to 20 ion thermal gyroradii (Lcp), calculated from average temperature and lobe magnetic field for each crossing). We found no relationship between the tilt angle of the current sheet normal and the half-thickness. In 68 cases the magnetic field curvature vector has a positive (earthward) X-component. Ten cases with a negative (tailward) curvature, associated with reconnection, were detected within 0<YGSM<7 RE. The minimum curvature radii vary mainly between 1 and 10 Lcp, and the adiabaticity parameter κ≤1 for 73% of the events. The electric current density during flapping is often off-central, i.e. the main current density is shifted from the neutral sheet (| Bx |<5nT) to the Northern or Southern Hemisphere. This is most likely a temporal effect related to the flapping. The analysis shows that the flapping motion of the current sheet is associated with kink-like waves on the sheet surface. The kink fronts, tilted in the Y-Z plane, moved toward dawn in the morning half and toward dusk in the evening half of the magnetotail.

scholarly journals Magnetic nulls in interacting dipolar fields

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Todd Elder ◽  
Allen H. Boozer
Keyword(s):  
Magnetic Field ◽  
Current Density ◽  
Magnetic Flux Tube ◽  
Electron Inertia ◽  
Characteristic Spatial Scale ◽  
Field Lines ◽  
Dipolar Fields ◽  
Time Required ◽  
Magnetic Null ◽  
The Magnetic Field

The prominence of nulls in reconnection theory is due to the expected singular current density and the indeterminacy of field lines at a magnetic null. Electron inertia changes the implications of both features. Magnetic field lines are distinguishable only when their distance of closest approach exceeds a distance $\varDelta _d$ . Electron inertia ensures $\varDelta _d\gtrsim c/\omega _{pe}$ . The lines that lie within a magnetic flux tube of radius $\varDelta _d$ at the place where the field strength $B$ is strongest are fundamentally indistinguishable. If the tube, somewhere along its length, encloses a point where $B=0$ vanishes, then distinguishable lines come no closer to the null than $\approx (a^2c/\omega _{pe})^{1/3}$ , where $a$ is a characteristic spatial scale of the magnetic field. The behaviour of the magnetic field lines in the presence of nulls is studied for a dipole embedded in a spatially constant magnetic field. In addition to the implications of distinguishability, a constraint on the current density at a null is obtained, and the time required for thin current sheets to arise is derived.

The Critical Current Density and the Curvature of the Magnetic Field in Epitaxial YBaCuO Films

1992 ◽  
Vol 170 (2) ◽  
pp. 549-562 ◽  
Author(s):  
D. Glatzer ◽  
A. Forkl ◽  
H. Theuss ◽  
H. U. Habermeier ◽  
H. Kronmüller
Keyword(s):  
Magnetic Field ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
The Magnetic Field

scholarly journals The hall effect in liquid electrolytes

1913 ◽  
Vol 88 (606) ◽  
pp. 588-604 ◽  
Keyword(s):  
Magnetic Field ◽  
Hall Effect ◽  
Electric Current ◽  
Metal Plate ◽  
Satisfactory Explanation ◽  
Thermo Electric ◽  
Field Independent ◽  
Set Up ◽  
The Magnetic Field ◽  
Thin Metal Plate

The distortion of the lines of flow of an electric current in a thin metal plate by the action of a magnetic field was discovered in 1879. Hall attributed this to the action of the magnetic field on the molecular currents in the metal film, which were deflected to one side or the other and accompanied by a corresponding twist of the equipotential lines. This explanation did not pass without criticism, and another theory of the effect found by Hall was published in 1884. In that paper the author seeks to explain the effect by assuming a combination of certain mechanical strains and Peltier effects, a thermo-electric current being set up between the strained and the unstrained portions. The effect of such strain was to produce a reverse effect in some metals, and these were precisely the metals for which the Hall effect was found to reverse. Aluminium was the only exception. In other respects, however, as shown by Hall in a later paper, Bidwell's theory did not stand the test of experiment, and the results lend no support to his theory, while they are in complete accordance withe the explanation that the molecular currents are disturbed by the action of the magnetic field. On the electron theory of metallic conduction, the mechanism of the Hall effect is more obvious, but at present no satisfactory explanation of the reversal found in some metals is known. Further experiments have made it clear that there is a real deflection of the elementary currents, due to the application of the magnetic field, independent of any effect due to strain.

Small, modular and economically attractive fusion enabled by high temperature superconductors

2019 ◽  
Vol 377 (2141) ◽  
pp. 20180354 ◽  
Author(s):  
Dennis Whyte
Keyword(s):  
Magnetic Field ◽  
High Temperature ◽  
Magnetic Fields ◽  
Current Density ◽  
High Temperature Superconductors ◽  
Fusion Energy ◽  
High Magnetic Fields ◽  
Operating Temperatures ◽  
The Magnetic Field ◽  
Game Changer

The advantages of high magnetic fields in tokamaks are reviewed, and why they are important in leading to more compact tokamaks. A brief explanation is given of what limits the magnetic field in a tokamak, and why high temperature superconductors (HTSs) are a game changer, not just because of their higher magnetic fields but also for reasons of higher current density and higher operating temperatures. An accelerated pathway to fusion energy is described, defined by the SPARC and ARC tokamak designs. This article is part of a discussion meeting issue ‘Fusion energy using tokamaks: can development be accelerated?’.

Sign in / Sign up

Export Citation Format

Share Document