Variations in sex, length and age compositions of commercial catches of Platycephalus fuscus (Pisces : Platycephalidae) in New South Wales, Australia

2002 ◽  
Vol 53 (7) ◽  
pp. 1091 ◽  
Author(s):  
C. A. Gray ◽  
V. J. Gale ◽  
S. L. Stringfellow ◽  
L. P. Raines

Commercial landings of dusky flathead (Platycephalus fuscus) from four estuaries in New South Wales (NSW), Australia, were sampled for data on sex, length and age composition between February and July each year for 2–3 years between 1995 and 1997. Landings primarily contained female fish, ranging from 55% to 93% by number for different estuaries. Flathead sampled in commercial catches ranged from 30 cm to 96 cm total length (TL), but the majority were 33–50 cm TL. Fish >40 cm TL were primarily female and male fish >45 cm TL were uncommon. The length composition of catches differed between gillnets of different mesh sizes, with the average length of fish being least in the smallest allowed mesh size of 70 mm. Fish were aged by otolith interpretation and the analysis of marginal increments indicated that one opaque and one translucent growth zone was formed each year; the opaque zone being deposited in June–August (winter) and first observed in September–October (spring). Commercial landings included fish aged 2–11+ years, but fish aged 2–4+ years dominated landings in all estuaries. The total mortality of dusky flathead in each estuary was estimated by catch curve analysis and was relatively high, ranging from 0.45 to 1.64. The data indicate that dusky flathead may be heavily exploited in NSW.

2002 ◽  
Vol 53 (8) ◽  
pp. 1179 ◽  
Author(s):  
John Stewart ◽  
Douglas J. Ferrell

Various sizes of wire mesh were tested as escape panels in fish traps in the New South Wales demersal trap fishery. The mesh selectivities of these escape panels were estimated using a 'parlour' trap, which is analogous to the 'covered codend' designs used to test selectivity in trawls. The results showed that we could estimate the selection size (l50) for most species based on their maximum body height and the maximum aperture of the escape panel mesh. This enabled us to make escape panel mesh that selected the main species in the fishery, snapper (Pagrus auratus), at a predetermined size. Placing the escape panel meshes with the longest axis orientated either vertically or horizontally showed that fish behaviour is important in determining mesh size selectivity. However, the selection size of some species was unaffected by the orientation of the mesh, suggesting that they were able to turn on their sides to escape. Silver trevally (Pseudocaranx dentex) formed tight schools within traps and were selected at smaller sizes when the meshes were oriented with the longest axis horizontally, suggesting that they do not turn on their sides to escape. Selectivity ogives were used with estimates of the sizes of retained and discarded fish captured in the fishery to estimate the impacts of using the escape panels tested on current landings. The results show the difficulty in designing effective escape panels in a multispecies fishery.


1995 ◽  
Vol 46 (4) ◽  
pp. 745 ◽  
Author(s):  
MK Broadhurst ◽  
SJ Kennelly

In response to claims that fish trawls off New South Wales, Australia, caught excessive quantities of under-size fish, the catches of finfish by a conventional fish trawl (constructed of 90-mm mesh in the body) were compared with those by a fish trawl constructed of 100-mm mesh in the body. Catches by the 100-mm trawl showed a 27% reduction in all by-catch and a 28% reduction in the numbers of retained tiger flathead, compared with catches by the conventional trawl. The 100-mm trawl also showed a 48% and 47% reduction in the numbers and weights respectively of discarded tiger flathead and a 57% and 63% reduction in the numbers and weights respectively of discarded rubberlip morwong. For john dory, however, at a particular locality where large numbers occurred, the 100-mm trawl caught significantly more fish than did the conventional trawl (a mean increase in weight of 66%). There is a need to determine species-specific mesh selectivities and to study the behaviour of fish in trawls. The importance of the results for the future management and operational efficiency of trawl fisheries is discussed.


1996 ◽  
Vol 36 (2) ◽  
pp. 229 ◽  
Author(s):  
GG Johns

Bunch trimming (removal of male bud and several distal hands from bunches soon after flowering), and double covering (use of 2 bunch covers simultaneously) of banana bunches that emerge during winter in northern New South Wales could have the potential to increase the size, and hence grade and price of harvested fruit. Consequently bunches were either trimmed to 6, 8 or 10 hands or left untrimmed (male bud retained), and either single or double bunch covers were applied on a commercial plantation on 3 occasions during winter, and the effects on fruit size and quality were recorded. Bunch emergence to bunch harvest interval was reduced by an average of 5 days by bunch trimming. Finger length increased with increasing severity of bunch trimming, with the average length for the top 6 hands increased by 2.3% (P<0.01) for the 10-hand treatment to 6.1% (P<0.001) for the 6-hand treatment. Finger weight increased with increasing severity of bunch trimming, with weights for the top 6 hands increased by up to 14% (P < 0.001) on the 6-hand treatment. Double covering increased finger weight of the top 6 hands by 4% (P < 0.01). Trimming to 10, 8 and 6 hands increased the yield per bunch of extra large grade fruit by 18, 23 and 39% respectively. Double covering did not affect the yield of extra large fruit significantly. After excluding hands suffering from the mixed ripe condition, the 6-hand treatment yielded 51% more marketable extra large fruit than untrimmed bunches. Potential profitability of the treatments depended on price scenario. When prices were low the 6-hand treatment appeared most profitable, but at higher prices the 10-hand treatment would be preferable. Double covering appeared not to be worthwhile for all price scenarios used.


1983 ◽  
Vol 34 (2) ◽  
pp. 253 ◽  
Author(s):  
DC Smith

Catch curves were analysed to estimate the annual total mortality of jackass morwong landed at the port of Eden between July 1976 and June 1979. The annual total mortality of females was lower in 1978-1979 than in the previous 2 years, reflecting the expansion of the trawl fishery in New South Wales to include previously unexploited deepwater grounds. Males were fully recruited to the commercially exploited population at an earlier age than females. It is suggested that the increased mortality in older males is due to an increase in natural mortality.


2008 ◽  
Vol 65 (4) ◽  
pp. 687-696 ◽  
Author(s):  
Douglas Rotherham ◽  
Matt K. Broadhurst ◽  
Charles A. Gray ◽  
Daniel D. Johnson

Abstract Rotherham, D., Broadhurst, M. K., Gray, C. A., and Johnson, D. D. 2008. Developing a beam trawl for sampling estuarine fish and crustaceans: assessment of a codend cover and effects of different sizes of mesh in the body and codend. – ICES Journal of Marine Science, 65: 687–696. An experiment was carried out in the Clarence River (New South Wales, Australia) to test the hypotheses that fish and crustacean catches in an experimental beam trawl were affected by a codend cover and the sizes of mesh in the body and codend. The cover had no obvious effects on the catches retained in the codend. Similarly, in comparisons between trawl bodies made from 26- and 41-mm diamond-shaped mesh, there were no differences in the assemblages of fish caught, or in the mean numbers entering the codends. For one species of fish (Acanthopagrus australis), however, there were differences in the proportions caught between the trawl bodies across different size classes. There was also some evidence to suggest that mesh size in the body of the trawl influenced the size selection of school prawns (Metapenaeus macleayi). For most finfish, there were no differences in catches between codends made from 20-mm and from 29-mm mesh hung on the bar (i.e. square-shaped mesh). In contrast, mesh size in the codend was important for the size selectivity of school prawns, with smaller carapace lengths at 50% retention in the 20-mm codend. We conclude that use of a 41-mm mesh in the body and a 20-mm square mesh in the codend of the beam trawl would be appropriate for future sampling with this gear in estuaries of New South Wales. A similar experimental approach to ours is needed in adapting the beam trawl to estuaries in other parts of the world, or in developing other types of research trawl.


1998 ◽  
Vol 36 (2-3) ◽  
pp. 217-236 ◽  
Author(s):  
S.J Kennelly ◽  
G.W Liggins ◽  
M.K Broadhurst

Sign in / Sign up

Export Citation Format

Share Document