Steel Multi-Tiered Concentrically Braced Frames (MT-CBFs) represent a bracing configuration where two or more concentric bracing panels are stacked between the ground and roof levels in tall single-storey buildings. A large proportion of MT-CBFs in Canada are located in low-to-moderate seismic regions (Seismic Category 0 – 3) where Limited Ductility CBFs are often preferred in design. Nevertheless, brace tensile yielding may not occur in all tiers of such frames. Additionally, the analysis and design procedure adopted by the 2019 Canadian steel design standard (CSA S16-19) can become tedious in tall frames with multiple panels. In this paper, the seismic behaviour of Limited Ductility MT-CBFs in moderate seismic regions of Canada is examined to propose a simplified design method. A set of 16 prototype MT-CBFs is designed in accordance with CSA S16-19, excluding the design requirements prescribed for MT-CBF columns. Nonlinear dynamic analyses are then performed to examine their seismic response. Finally, an efficient design method is proposed in the framework of CSA S16-19.
Seismic behaviour of ten storeyed concentrically braced frames