scholarly journals Effect of n-Butanol Blends on Engine Performance and Exhaust Emission of Compression Ignition Engine Fuelled with Diesel-Palm Oil Methyl Ester (B20)

2021 ◽  
Vol 1062 (1) ◽  
pp. 012021
Author(s):  
Mohd Azrul Ahmad ◽  
Nik Rosli Abdullah ◽  
Zaky Zuhairi Zawawi ◽  
Asiah Ab Rahim ◽  
Hasannuddin Abdul Kadir
Author(s):  
Amir Ridhuan ◽  
Shahrul Azmir Osman ◽  
Mas Fawzi ◽  
Ahmad Jais Alimin ◽  
Saliza Azlina Osman

This introductory study comes up with an innovative idea of using Hydroxyl gas as a fuel performance enhancer to reduce the natural sources and the overuse of fossil fuel resulting in increased pollution levels. Many researchers have used HHO gas to analyze gasoline and diesel in internal combustion engines. The main challenges of using HHO gas in engines have been identified as system complexity, safety, cost, and electrolysis efficiency. This article focuses on different performance reports and the emission characteristics of a compression ignition engine. As opposed to general diesel, this study found that using HHO gas improved brake power and torque. In all cases, an increase in braking thermal efficiency can be observed. This was due to the presence of hydrogen in HHO gas with higher calorific value than fossil fuels. At the same time, the fuel consumption unit of the engine was reduced, and the combined impact of hydrogen and oxygen helped to achieve complete combustion and improved the combustion capacity of the fuel when HHO gas was injected. The addition of HHO gas also improved the Brake Power (BP), Brake Torque (BT), Brake Specific Fuel Consumption (BSFC), and thermal efficiency while simultaneously reducing CO and HC formation. The rise in CO2 emissions represented the completion of combustion. Therefore, the usage of HHO gas in the Compression Ignition (CI) engine improved the engine performance and exhaust emissions.


Author(s):  
Gopal Kumar Deshmukh ◽  
Ammenur Rehman ◽  
Rajesh Gupta

Jatropha-curcas biodiesel has recently been considered as one of the potential renewable energy sources in Asia. This biodiesel is produced through the transesterification process of the non-edible oil obtained from Jatropha-curcas. The properties of this biodiesel are quite similar to those of diesel fuel. However, high viscosity of pure Jatropha-curcas biodiesel adversely affects engine performance. Hence, the percentage of Jatrophacurcas biodiesel that will not cause any adverse effect on the engine must be determined. In this context, this paper experimentally investigates the performance and exhaust emission characteristics of a direct injection compression ignition engine fuelled with 25%, 50% and 100% volume basis Jatropha-curcas biodiesel with diesel. Results showed that the Jatropha-curcas biodiesel and its blends demonstrated lower values for brake thermal efficiency and exhaust emission levels than diesel, but not for nitrogen oxide levels and brake specific fuel consumption. It was observed that the blend containing 25% Jatropha-curcas biodiesel (BD25) was the best alternative for diesel fuel based on engine emissions and overall performance. Therefore, BD25 could be considered a potential alternative fuel for compression ignition engines.


Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 265
Author(s):  
Ameer Suhel ◽  
Norwazan Abdul Rahim ◽  
Mohd Rosdzimin Abdul Rahman ◽  
Khairol Amali Bin Ahmad ◽  
Yew Heng Teoh ◽  
...  

In recent years, industries have been investing to develop a potential alternative fuel to substitute the depleting fossil fuels which emit noxious emissions. Present work investigated the effect of ferrous ferric oxide nano-additive on performance and emission parameters of compression ignition engine fuelled with chicken fat methyl ester blends. The nano-additive was included with various methyl ester blends at different ppm of 50, 100, and 150 through the ultrasonication process. Probe sonicator was utilized for nano-fuel preparation to inhibit the formation of agglomeration of nanoparticles in base fuel. Experimental results revealed that the addition of 100 ppm dosage of ferrous ferric oxide nanoparticles in blends significantly improves the combustion performance and substantially decrease the pernicious emissions of the engine. It is also found from an experimental results analysis that brake thermal efficiency (BTE) improved by 4.84%, a reduction in brake specific fuel consumption (BSFC) by 10.44%, brake specific energy consumption (BSEC) by 9.44%, exhaust gas temperature (EGT) by 19.47%, carbon monoxides (CO) by 53.22%, unburned hydrocarbon (UHC) by 21.73%, nitrogen oxides (NOx) by 15.39%, and smoke by 14.73% for the nano-fuel B20FFO100 blend. By seeing of analysis, it is concluded that the doping of ferrous ferric oxide nano-additive in chicken fat methyl ester blends shows an overall development in engine characteristics.


2021 ◽  
Vol 1126 (1) ◽  
pp. 012074
Author(s):  
Nitin Dattatreya Kamitkar ◽  
Satishkumar ◽  
A N Basavaraju ◽  
Shashikant Kushnoore ◽  
A B Deepa ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document