scholarly journals Characterization of a novel terpolymer containing maleic anhydride-co-stearyl methacrylate-co-benhely acrylate for wax inhibition application

Author(s):  
I Elganidi ◽  
B S Elarbe ◽  
N Abdullah ◽  
N Ridzuan
2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Amal Amin ◽  
Moshera Samy

Different polyesteramides hyperbranched polymers (HPEA1-6)/montomorillonite clay (MMT) nanocomposites were prepared with three different loading contents of clay (4, 10, and 15 wt%). The obtained nanocomposites were characterized via XRD, thermal analyses, and TEM. Generally, intercalation behavior was observed. The hyperbranched polyesteramides (HPEA1-6) were originally prepared by the bulky reaction between maleic anhydride (MAn), succinic anhydride (ScAn), and phthalic anhydride (PhAn) with either diethanolamine (DEA) or diisopropanolamine (DiPA). The resulting hyperbranched polyesteramides (HPEA1-6) were characterized by GPC, IR,1H-NMR, TGA, and DSC.


2005 ◽  
Vol 2 (1) ◽  
pp. 93-103
Author(s):  
Baghdad Science Journal

were prepared by condensation of 6-R-2amino bcnzothiazol with Salicyldehyde.These Schiff bases were found to reach with maleic anhydride and citraconic to give


2012 ◽  
Vol 72 (9) ◽  
pp. 635-641 ◽  
Author(s):  
Mariana-Dana Damaceanu ◽  
Marcela Mihai ◽  
Irina Popescu ◽  
Maria Bruma ◽  
Simona Schwarz

2007 ◽  
Vol 285 (12) ◽  
pp. 1369-1376 ◽  
Author(s):  
Junfeng Zhou ◽  
Li Wang ◽  
Qiang Yang ◽  
Xiaochen Dong ◽  
Haojie Yu

2019 ◽  
Vol 53 (23) ◽  
pp. 3325-3333 ◽  
Author(s):  
Ibrahim Bilici ◽  
Celal U Deniz ◽  
Beytullah Oz

Varying ratios of industrial byproduct of flue gas desulfurization gypsum and recycled polyethylene were used to prepare composite matrices in order to develop an eco-friendly material. Small ratios of maleic anhydride grafted polyethylene were used as a compatibilizer. Surface morphologies and microstructures were examined by scanning electron microscopy images. Thermal behavior of the prepared composite materials was then investigated through thermogravimetry techniques. Hardness and tensile strength of the composite were evaluated through variations made to the contribution of individual components. The resulting composites exhibit increasing melt flow rate values, while hardness decreases with increasing maleic anhydride grafted polyethylene ratios. Amount of torque required to blend mixture also increases with maleic anhydride grafted polyethylene content.


2016 ◽  
Vol 19 (1) ◽  
pp. 229-235 ◽  
Author(s):  
Thaís Larissa do Amaral Montanheiro ◽  
Fábio Roberto Passador ◽  
Maurício Pinheiro de Oliveira ◽  
Nelson Durán ◽  
Ana Paula Lemes
Keyword(s):  

2011 ◽  
Vol 295-297 ◽  
pp. 286-291
Author(s):  
Li Guo Wang ◽  
Xiao Guang Zhang ◽  
Shu Fang Hou ◽  
Xiu Ju Wang ◽  
Ai Min Wang ◽  
...  

Hydrophilic polyvinylidene fluoride (PVDF) flat ultrafiltration membranes were prepared by wet-spinning method. The effects of technical parameters of maleic anhydride grafted onto PVDF on the performance of hydrophilic PVDF membranes were investigated, the preparation technical parameters were determined, and the hydrophilic PVDF flat membranes were prepared. Then, hydrophilic PVDF membranes were characterized in terms of pure water flux, contact angle, infrared spectroscopic analysis and scanning electron microscope(SEM). The results showed that maleic anhydride had been grafted onto PVDF, and the hydrophilic performance of the modified membrane was better than the traditional one.


Sign in / Sign up

Export Citation Format

Share Document