scholarly journals Investigation of overall mass transfer coefficient of CO2 absorption in to aqueous blended Monoethanolamine (MEA), Diethanolamine (DEA) and Triethanolamine (TEA) measured in Bubble column Reactor solution

2020 ◽  
Vol 870 ◽  
pp. 012056
Author(s):  
Salih Rushdi ◽  
Elaf Thamer
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Bubble Column ◽  
Bubble Column Reactor ◽  
Co2 Absorption ◽  
Column Reactor ◽  
Overall Mass Transfer Coefficient

scholarly journals An Experimental Investigation of Overall Mass Transfer coefficient ( K_Ga ) of 〖CO〗_2 absorption using Monoethanolamine(MEA) and Diethanolamine(DEA) in a Bubble Column Reactor (BCR)

2020 ◽  
Vol 13 (1) ◽  
pp. 67-73
Author(s):  
Elaf Thamera ◽  
Salih Abduljabbar Rushdi
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Flow Rate ◽  
Gas Flow ◽  
Bubble Column ◽  
Bubble Column Reactor ◽  
Air Flow Rate ◽  
Column Reactor ◽  
Overall Mass Transfer Coefficient

In this work, an absorption technology   was used actually to investigation the  mass transfer coefficient of carbon dioxide from a gaseous mixture (air, carbon dioxide) in  blended solution Monoethanolamine (MEA) and Diethanolamine (DEA)  in a bubble column reactor (BCR) . The bubble column reactor(BCR) was made of Plexiglas with 1.5 m high and 0.1 m inside diameter. The overall mass transfer coefficient (  was evaluated at different operating conditions , gas flow rate, air Flow rate ,liquid flow rate .Where the gas flow rates were 10, 15 and 20 L /min ,  air flow rate 100,150 and 200 L/h ,and liquid flow rate 5 ,10,15 L /min . This experiment  by   using  continuous   process with helping centrifugal  pump  . High-performance gas chromatographic (GC) was performed to evaluate  loading during absorption experiment . The  experimental results have shown that the   loading in range of  0.581-1.367 (mol  /mole amine),and the maximum value of overall mass transfer coefficient ( KG) was 0.04 S-1 .

scholarly journals Mass Transfer Coefficient Studies in Bubble Column Reactor

2010 ◽  
Vol 4 (7) ◽  
Author(s):  
D. Devakumar ◽  
K. Saravanan ◽  
T. Kannadasan ◽  
B. Meenakshipriya
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Bubble Column ◽  
Bubble Column Reactor ◽  
Column Reactor

Gas-liquid mass transfer coefficient of methane in bubble column reactor

2015 ◽  
Vol 32 (6) ◽  
pp. 1060-1063 ◽  
Author(s):  
Jaewon Lee ◽  
Muhammad Yasin ◽  
Shinyoung Park ◽  
In Seop Chang ◽  
Kyoung-Su Ha ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Bubble Column ◽  
Bubble Column Reactor ◽  
Column Reactor ◽  
Liquid Mass ◽  
Liquid Mass Transfer

scholarly journals Effect of pH and Gas Flow Rate on Ozone Mass Transfer of Κ-Carrageenan Solution in Bubble Column Reactor

REAKTOR ◽  
2019 ◽  
Vol 18 (04) ◽  
pp. 177 ◽  
Author(s):  
Aji Prasetyaningrum ◽  
Dyah Arum Kusumaningtyas ◽  
Purbo Suseno ◽  
Ratnawati Ratnawati
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Flow Rate ◽  
Gas Flow ◽  
Bubble Column ◽  
Operating Conditions ◽  
Bubble Column Reactor ◽  
Gas Flow Rate ◽  
Column Reactor

This research was conducted to calculate the mass transfer coefficient value for ozonation reaction of κ-carrageenan solution in the bubble column reactor. Ozone gas was produced using ozone generator type corona discharge. In this study, operating conditions were regulated at ozone gas flow rate 2- 5 L min-1, pH 4-10, and temperature 29 ± 1 oC. Samples were tested every 5 minutes to determine the dissolved ozone concentration. The results showed that dissolved ozone concentrations increased with increasing ozonation time and ozone gas flow rate. However, a very high gas flow rate can increase turbulence so that the mass transfer coefficient (kLa) value decreased. In alkaline conditions, the formation of free radicals (HO*) increases so that the amount of dissolved ozone decreases. The kLa value of ozone gas in κ-carrageenan solution is slightly lower than the kLa value of the ozone gas in the water. The results of this study indicate that (kLa) ozone gas in water is 0.131 / minute while the value (kLa) in κ-carrageenan solution is 0.128 / minute.

scholarly journals Overall Mass Transfer Coefficient of CO2 Absorption in a Diameter-varying Spray Tower

2017 ◽  
Vol 114 ◽  
pp. 1665-1670 ◽  
Author(s):  
Xiaomei Wu ◽  
Min He ◽  
Yunsong Yu ◽  
Zhen Qin ◽  
Zaoxiao Zhang
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Co2 Absorption ◽  
Spray Tower ◽  
Overall Mass Transfer Coefficient

Effect of Vibrating Sparger on Mass Transfer, Gas Holdup, and Bubble Size in a Bubble Column Reactor

2013 ◽  
Vol 11 (1) ◽  
pp. 47-56 ◽  
Author(s):  
Laleh Hadavand ◽  
Ali Fadavi
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Vibration Frequency ◽  
Bubble Size ◽  
Bubble Column ◽  
Gas Holdup ◽  
Bubble Column Reactor ◽  
Gas Velocity ◽  
Superficial Gas Velocity

Abstract Bubble size has a key role in gas holdup and mass transfer in bubble column reactors. In order to have small and uniform bubbles, a new structure was designed; the reactor operates in two modes, with vibrating sparger and conventional bubble column in which sparger is fixed. In vibrating mode, the sparger vibrates gently during gas entering. The vibrating sparger performs like a paddle, resulting in a forced recirculation of gas–liquid inside the reactor; moreover, the bubble detachment is accelerated. The superficial gas velocity was between 0.003 and 0.013 ms− 1, and the vibration frequency was changed between 0 and 10.3 Hz. The bubble size was measured at three various positions of the reactor height by photographic method and using MATLAB 7.0.1 software. The mass transfer coefficient was determined by means of the dynamic gassing-out method. The results show that the bubbles were bigger in vibrating mode than those working without vibration. The bubble size decreases with increase in height from sparger. Gas holdup increased with increase in superficial gas velocity and vibration frequency. The effect of vibration increased the gas holdup with an average of 70% for all superficial gas velocities. Volumetric mass transfer coefficient was almost stable as vibration frequency increased.

scholarly journals Mass Transfer Coefficient of Ozone in a Bubble Column

2018 ◽  
Vol 156 ◽  
pp. 02015 ◽  
Author(s):  
Ratnawati Ratnawati ◽  
Dyah Arum Kusumaningtyas ◽  
Purbo Suseno ◽  
Aji Prasetyaningrum
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Flow Rate ◽  
Gas Flow ◽  
Bubble Column ◽  
Bubble Column Reactor ◽  
Ozone Generator ◽  
Gas Flow Rate ◽  
State Concentration

The effect of flow rate of ozone-containing gas and pH on the mass transfer coefficient of ozone through water in a bubble column reactor has been studied. Ozone was generated from air using a corona discharge ozone generator. The flow rate of air was varied from 2 to 5 L min-1, while pH was varied from 4 to 10. The gas containing ozone was bubbled to the reactor containing 1.5 L of 2% KI solution. The temperature was set at 28±1ºC. The concentration of ozone was determined using titrimetric method every 5 minutes. The results show that the concentration of ozone increases with time, and it reaches a steady-state concentration after 30 minutes of ozonation. The gas flow rate and pH apparently affect both the concentration and the kLa. The highest kLa of 2.1 X 10-2 s-1 is obtained at pH 4 with a gas flow rate of 4 L min-1.

scholarly journals Optimization in the Absorption and Desorption of CO2 Using Sodium Glycinate Solution

2018 ◽  
Vol 8 (11) ◽  
pp. 2041 ◽  
Author(s):  
Pao Chi Chen ◽  
Sheng-Zhong Lin
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Flow Rate ◽  
Bubble Column ◽  
Absorption Efficiency ◽  
Operating Conditions ◽  
Flow Rate Ratio ◽  
Optimum Operating ◽  
Co2 Absorption

This study used sodium glycinate as an absorbent to absorb CO2 in the bubble column scrubber under constant pH and temperature environments to obtain the operating range, CO2 loading, and mass transfer coefficient. For efficient experimentation, the Taguchi method is used for the experimental design. The process parameters are the pH, gas flow rate (Qg), liquid temperature (T), and absorbent concentration (CL). The effects of the parameters on the absorption efficiency, absorption rate, overall mass transfer coefficient, gas–liquid molar flow rate ratio, CO2 loading, and absorption factor are to be explored. The optimum operating conditions and the order of parameter importance are obtained using the signal/noise (S/N) ratio analysis, and the optimum operating conditions are further verified. The verification of the optimum values was also carried out. The order of parameter importance is pH > CL > Qg > T. Evidence in the 13CNMR (Carbon 13 Nuclear Magnetic Resonance) spectra shows that the pH value has an effect on the solution composition, which affects both the absorption efficiency and mass transfer coefficient. There are 18 experiments for regeneration, where the operating temperature is 100–120 °C. The heat of regeneration was measured according to the thermodynamic data. The CO2 loading, the overall mass transfer, and the heats of regeneration correlation are also discussed in this work. Finally, an operating policy for the CO2 absorption process was confirmed.

Theoretical Study of CO2 Absorption into Novel Reactive 1DMA2P Solvent in Split-flow Absorber-stripper Unit: Mass Transfer Performance and Kinetic Analysis

2019 ◽  
Vol 17 (12) ◽  
Author(s):  
Majid Saidi
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Co2 Absorption ◽  
Transfer Performance ◽  
Amine Concentration ◽  
Liquid Feed ◽  
Split Flow ◽  
Overall Mass Transfer Coefficient ◽  
Feed Temperature

Abstract In the present study, the mass transfer performance of CO2 absorption into 1-dimethylamino-2-propanol (1DMA2P) as a novel amino alcohol solvent has been theoretically investigated in a split-flow absorber-stripper unit. The mass transfer performance has been presented in terms of CO2 absorption flux and overall mass transfer coefficient (KGav) by simultaneous considering of chemical reactions and mass transfer phenomenon. The developed comprehensive mathematical model has been validated based on related experimental data in literature. The impact of main operation parameters including liquid feed temperature, amine concentration, liquid velocity and CO2 loading were evaluated. The presented results indicated that increasing the liquid feed temperature, amine concentration and liquid flow rate improves the overall mass transfer coefficient. Also, the CO2 absorption performance of conventional and alternative amines such as monoethanolamine (MEA), diethanolamine (DEA), triethanolamine (TEA), methyldiethanolamine (MDEA), piperazine (PZ), 4-(diethylamino)-2-butanol (DEAB) and 1DMA2P have been investigated and compared in order to provide guidelines about effective screening of solvents. The modeling results indicated that the KGav for CO2 absorption into different solution can be ranked as follows: PZ>MEA>DEA>DEAB>1DMA2P>MDEA>TEA.

Sign in / Sign up

Export Citation Format

Share Document