scholarly journals Performance Monitoring for Sensorimotor Confidence: A Visuomotor Tracking Study

2019 ◽  
Author(s):  
Shannon M. Locke ◽  
Pascal Mamassian ◽  
Michael S. Landy
Keyword(s):  
Task Difficulty ◽  
Performance Monitoring ◽  
Stimulus Presentation ◽  
Temporal Analysis ◽  
Tracking Performance ◽  
List Type ◽  
Visuomotor Tracking ◽  
Mouse Cursor ◽  
The Stability

AbstractTo best interact with the external world, humans are often required to consider the quality of their actions. Sometimes the environment furnishes rewards or punishments to signal action efficacy. However, when such feedback is absent or only partial, we must rely on internally generated signals to evaluate our performance (i.e., metacognition). Yet, very little is known about how humans form such judgements of sensorimotor confidence. Do they monitor their performance? Or do they rely on cues to sensorimotor uncertainty to infer how likely it is they performed well? We investigated motor metacognition in two visuomotor tracking experiments, where participants followed an unpredictably moving dot cloud with a mouse cursor as it followed a random trajectory. Their goal was to infer the underlying target generating the dots, track it for several seconds, and then report their confidence in their tracking as better or worse than their average. In Experiment 1, we manipulated task difficulty with two methods: varying the size of the dot cloud and varying the stability of the target’s velocity. In Experiment 2, the stimulus statistics were fixed and duration of the stimulus presentation was varied. We found similar levels of metacognitive sensitivity in all experiments, with the temporal analysis revealing a recency effect, where error later in the trial had a greater influence on the sensorimotor confidence. In sum, these results indicate humans predominantly monitor their tracking performance, albeit inefficiently, to judge sensorimotor confidence.HighlightsParticipants consciously reflected on their tracking performance with some accuracySensorimotor confidence was influenced by recent errorsExpectations of task difficulty did not play a large role in sensorimotor confidenceMetacognitive sensitivity of binary confidence judgements on continuous performance can be quantified with standard non-parametric techniques

Open discussion

1982 ◽  
Vol 99 ◽  
pp. 605-613
Author(s):  
P. S. Conti
Keyword(s):  
Buenos Aires ◽  
Large Mass ◽  
List Type ◽  
Common Phenomenon ◽  
Open Discussion ◽  
The Stability ◽  
Ring Nebulae

Conti: One of the main conclusions of the Wolf-Rayet symposium in Buenos Aires was that Wolf-Rayet stars are evolutionary products of massive objects. Some questions:–Do hot helium-rich stars, that are not Wolf-Rayet stars, exist?–What about the stability of helium rich stars of large mass? We know a helium rich star of ∼40 MO. Has the stability something to do with the wind?–Ring nebulae and bubbles : this seems to be a much more common phenomenon than we thought of some years age.–What is the origin of the subtypes? This is important to find a possible matching of scenarios to subtypes.

Criteria for evaluation of the coordinate measurements quality of parts geometric parameters at pilot-experimental production

2019 ◽  
pp. 3-8
Author(s):  
N.Yu. Bobrovskaya ◽  
M.F. Danilov
Keyword(s):  
Quality Indicators ◽  
Quality Management System ◽  
Technical Specification ◽  
Experimental Production ◽  
Technological Heredity ◽  
Coordinate Measurements ◽  
Reasonable Choice ◽  
The Stability ◽  
Geometric Elements

The criteria of the coordinate measurements quality at pilot-experimental production based on contemporary methods of quality management system and traditional methods of the measurements quality in Metrology are considered. As an additional criterion for quality of measurements, their duration is proposed. Analyzing the problem of assessing the quality of measurements, the authors pay particular attention to the role of technological heredity in the analysis of the sources of uncertainty of coordinate measurements, including not only the process of manufacturing the part, but all stages of the development of design and technological documentation. Along with such criteria as the degree of confidence in the results of measurements; the accuracy, convergence, reproducibility and speed of the results must take into account the correctness of technical specification, and such characteristics of the shape of the geometric elements to be controlled, such as flatness, roundness, cylindrical. It is noted that one of the main methods to reduce the uncertainty of coordinate measurements is to reduce the uncertainty in the initial data and measurement conditions, as well as to increase the stability of the tasks due to the reasonable choice of the basic geometric elements (measuring bases) of the part. A prerequisite for obtaining reliable quality indicators is a quantitative assessment of the conditions and organization of the measurement process. To plan and normalize the time of measurements, the authors propose to use analytical formulas, on the basis of which it is possible to perform quantitative analysis and optimization of quality indicators, including the speed of measurements.

Investigating the Ease-of-Retrieval Effect in an Eyewitness Context

2019 ◽  
Author(s):  
Roy Groncki ◽  
Jennifer L Beaudry ◽  
James D. Sauer
Keyword(s):  
Cognitive Processes ◽  
Task Difficulty ◽  
Memory Studies ◽  
Relevant Information ◽  
Perceived Quality ◽  
Expected Effect ◽  
Bayesian Testing ◽  
Finding Study ◽  
Identification Confidence

The way in which individuals think about their own cognitive processes plays an important role in various domains. When eyewitnesses assess their confidence in identification decisions, they could be influenced by how easily relevant information comes to mind. This ease-of-retrieval effect has a robust influence on people’s cognitions in a variety of contexts (e.g., attitudes), but it has not yet been applied to eyewitness decisions. In three studies, we explored whether the ease with which eyewitnesses recall certain memorial information influenced their identification confidence assessments and related testimony-relevant judgements (e.g., perceived quality of view). We manipulated the number of reasons participants gave to justify their identification (Study 1; N = 343), and also the number of instances they provided of a weak or strong memory (Studies 2a & 2b; Ns = 350 & 312, respectively). Across the three studies, ease-of-retrieval did not affect eyewitnesses’ confidence or other testimony-relevant judgements. We then tried—and failed—to replicate Schwarz et al.’s (1991) original ease-of-retrieval finding (Study 3; N = 661). In three of the four studies, ease-of-retrieval had the expected effect on participants’ perceived task difficulty; however, frequentist and Bayesian testing showed no evidence for an effect on confidence or assertiveness ratings.

Statistical Management of Food Production Processes

2020 ◽  
pp. 30-35
Author(s):  
N.A. Jurk ◽  
Keyword(s):  
Production Process ◽  
Control Chart ◽  
Food Production ◽  
Time Interval ◽  
Bakery Products ◽  
Shewhart Control ◽  
Manufactured Products ◽  
Mnemonic Technique ◽  
The Stability

The article presents scientific research in the field of statistical controllability of the food production process using the example of bakery products for a certain time interval using statistical methods of quality management. During quality control of finished products, defects in bakery products were identified, while the initial data were recorded in the developed form of a checklist for registering defects. It has been established that the most common defect is packaging leakage. For the subsequent statistical assessment of the stability of the production process and further analysis of the causes of the identified defect, a Shewhart control chart (p-card by an alternative feature) was used, which allows you to control the quality of manufactured products by the number of defects detected. Analyzing the control chart, it was concluded that studied process is conditionally stable, and the emerging defects are random. At the last stage of the research, the Ishikawa causal diagram was used, developed using the 6M mnemonic technique, in order to identify the most significant causes that affect the occurrence of the considered defect in bakery products. A more detailed study will allow the enterprise to produce food products that meet the established requirements.

scholarly journals Identifying Stabilising Effects on Survey Based Life Satisfaction Using Quasi-maximum Likelihood Estimation

2021 ◽  
Author(s):  
Johannes Klement
Keyword(s):  
Life Satisfaction ◽  
Maximum Likelihood ◽  
Maximum Likelihood Estimation ◽  
Negative Binomial ◽  
Measurement Instrument ◽  
Likelihood Estimation ◽  
Satisfaction Scale ◽  
Quasi Maximum Likelihood ◽  
The Stability

AbstractTo which extent do happiness correlates contribute to the stability of life satisfaction? Which method is appropriate to provide a conclusive answer to this question? Based on life satisfaction data of the German SOEP, we show that by Negative Binomial quasi-maximum likelihood estimation statements can be made as to how far correlates of happiness contribute to the stabilisation of life satisfaction. The results show that happiness correlates which are generally associated with a positive change in life satisfaction, also stabilise life satisfaction and destabilise dissatisfaction with life. In such as they lower the probability of leaving positive states of life satisfaction and increase the probability of leaving dissatisfied states. This in particular applies to regular exercise, volunteering and living in a marriage. We further conclude that both patterns in response behaviour and the quality of the measurement instrument, the life satisfaction scale, have a significant effect on the variation and stability of reported life satisfaction.

scholarly journals The effect of flexural–torsional buckling on the stability of timber members: a case study

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Osama A. B. Hassan
Keyword(s):  
Axial Compression ◽  
Bending Moment ◽  
List Type ◽  
Torsional Buckling ◽  
Solution Methods ◽  
Simplified Solution ◽  
The Stability ◽  
Flexural Torsional Buckling ◽  
Building Engineering

Abstract This study investigates the stability of timber members subjected to simultaneously acting axial compression and bending moment, with possible risk for torsional and flexural–torsional buckling. This situation can occur in laterally supported members where one side of the member is braced but the other side is unbraced. In this case, the free side will buckle out of plane while the braced side will be prevented from torsional and flexural–torsional buckling. This problem can be evident for long members in timber-frame structures, which are subjected to high axial compression combined with bending moments in which the member is not sufficiently braced at both sides. This study is based on the design requirement stated in Eurocode 5. Solution methods discussed in this paper can be of interest within the framework of structural and building Engineering practices and education in which the stability of structural elements is investigated. Article Highlights This case study investigates some design situations where the timber member is not sufficiently braced. In this case, a stability problem associated with combined torsional buckling and flexural buckling can arise. The study shows that the torsional and/or flexural–torsional buckling of timber members can be important to control in order to fulfil the criteria of the stability of the member according to Eurocode 5 and help the structural engineer to achieve safer designs. The study investigates also a simplified solution to check the effect of flexural torsional buckling of laterally braced timber members.

scholarly journals Quantifying the Effects of Vibration on Medicines in Transit Caused by Fixed-Wing and Multi-Copter Drones

Drones ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 22
Author(s):  
Andrew Oakey ◽  
Tim Waters ◽  
Wanqing Zhu ◽  
Paul G. Royall ◽  
Tom Cherrett ◽  
...  
Keyword(s):  
Road Transport ◽  
Uv Spectra ◽  
Frequency Spectra ◽  
Vibration Measurements ◽  
British Pharmacopoeia ◽  
Medical Products ◽  
Industry Standard ◽  
The Stability ◽  
In Transit

The concept of transporting medical products by drone is gaining a lot of interest amongst the medical and logistics communities. Such innovation has generated several questions, a key one being the potential effects of flight on the stability of medical products. The aims of this study were to quantify the vibration present within drone flight, study its effect on the quality of the medical insulin through live flight trials, and compare the effects of vibration from drone flight with traditional road transport. Three trials took place in which insulin ampoules and mock blood stocks were transported to site and flown using industry standard packaging by a fixed-wing or a multi-copter drone. Triaxial vibration measurements were acquired, both in-flight and during road transit, from which overall levels and frequency spectra were derived. British Pharmacopeia quality tests were undertaken in which the UV spectra of the flown insulin samples were compared to controls of known turbidity. In-flight vibration levels in both the drone types exceeded road induced levels by up to a factor of three, and predominant vibration occurred at significantly higher frequencies. Flown samples gave clear insulin solutions that met the British Pharmacopoeia specification, and no aggregation of insulin was detected.

scholarly journals Highly fluorescent CsPbBr3/TiO2 core/shell perovskite nanocrystals with excellent stability

2021 ◽  
Vol 3 (6) ◽  
Author(s):  
Haitao Chen ◽  
Renhua Li ◽  
Anqi Guo ◽  
Yu Xia
Keyword(s):  
Identical Particle ◽  
Core Shell ◽  
List Type ◽  
Easy Method ◽  
Time Resolved ◽  
Perovskite Nanocrystals ◽  
Promising Application ◽  
The Stability ◽  
Time Resolved Photoluminescence ◽  
Excellent Stability

AbstractThe poor stability of CsPbX3 (X = Cl, Br, I) perovskite nanocrystals is the most impediment to its application in the field of photoelectrics. In this work, monodisperse CsPbBr3/TiO2 nanocrystals are successfully prepared by coating titanium precursor on the surface of colloidal CsPbBr3 nanocrystals at room temperature. The CsPbBr3/TiO2 nanocomposites exhibit excellent stability, remaining the identical particle size (9.2 nm), crystal structures and optical properties. Time-resolved photoluminescence decay shows that the lifetime of CsPbBr3/TiO2 nanocrystals is about 4.04 ns and keeps great stability after lasting two months in the air. Results show that the coating of TiO2 on CsPbBr3 NCs greatly suppressed the anion exchange and photodegradation, which are the main reasons for dramatically improving their chemical stability and photostability. The results provide an effective method to solve the stability problem of perovskite nanostructures and are expected to have a promising application in optoelectronic fieldsArticle highlights 1. Prepared the all-inorganic CsPbBr3/TiO2 core/shell perovskite nanocrystals by an easy method. 2. Explored its essences of PL and lifetime of the synthesized CsPbBr3/TiO2 perovskite nanocrystals. 3. CsPbBr3/TiO2 nanocrystals show the great thermal stability after the post-annealing. 4. The CsPbBr3/TiO2 nanocrystals have a high PLQY and have a promising application in solar cells.

scholarly journals Optical Analysis of RF Sputtering Plasma through Colour Characterization

Coatings ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 315 ◽  
Author(s):  
Ali Salimian ◽  
Roohollah Haghpanahan ◽  
Abul Hasnath ◽  
Hari Upadhyaya
Keyword(s):  
Rf Sputtering ◽  
Plasma Source ◽  
Film Coating ◽  
Chamber Pressure ◽  
Plasma Power ◽  
Plasma Sputtering ◽  
Chromaticity Index ◽  
Colour Parameters ◽  
The Stability

The photometric properties of an radio frequency (RF)-based sputtering plasma source were monitored through optical spectroscopy. The colour of the plasma source was deduced based on conventional chromaticity index analysis and it was compared to the direct spectral data plots of the emission peaks to investigate the possibility of characterising the plasma based on its specific colour and exploring the potential of defining a new method by which the plasma sputtering process can be addressed based on the plasma colour parameters. The intention of this investigation is to evaluate the possibility of simplifying the monitoring and assessment of the sputtering process for applied scientists operating plasma sputter deposition systems. We demonstrate a viable potential for this technique in terms of providing information regarding the stability of the plasma, chamber pressure, and plasma power; however, further work is underway to verify and assess a relationship between the quality of the thin film coating and the colour characteristics of the deposition plasma. Here, we only focus on the feasibility of such an approach and demonstrate interesting observations. We observed a linear relationship between the colour functions and the plasma power, while the stability of the sputtering plasma can be assessed based on the plasma colour functions. The colour functions also follow a unique pattern when the working gas pressure is increased.

Flight performance monitoring with optimal filtering applications

2019 ◽  
Vol 124 (1272) ◽  
pp. 170-188
Author(s):  
V. A. Deo ◽  
F. Silvestre ◽  
M. Morales
Keyword(s):  
Kalman Filter ◽  
Performance Monitoring ◽  
The Body ◽  
Flight Performance ◽  
Performance Parameters ◽  
Sideslip Angle ◽  
Fuel Flow ◽  
Aircraft Performance ◽  
Lift And Drag

ABSTRACTThis work presents an alternative methodology for monitoring flight performance during airline operations using the available inboard instrumentation system. This method tries to reduce the disadvantages of the traditional specific range monitoring technique where instrumentation noise and cruise stabilisation conditions affect the quality of the performance monitoring results. The proposed method consists of using an unscented Kalman filter for aircraft performance identification using Newton’s flight dynamic equations in the body X, Y and Z axis. The use of the filtering technique reduces the effect of instrumentation and process noise, enhancing the reliability of the performance results. Besides the better quality of the monitoring process, using the proposed technique, additional results that are not possible to predict with the specific range method are identified during the filtering process. An example of these possible filtered results that show the advantages of this proposed methodology are the aircraft fuel flow offsets, as predicted in the specific range method, but also other important aircraft performance parameters as the aircraft lift and drag coefficients (CL and CD), sideslip angle (β) and wind speeds, giving the operator a deeper understanding of its aircraft operational status and the possibility to link the operational monitoring results to aircraft maintenance scheduling. This work brings a cruise stabilisation example where the selected performance monitoring parameters such as fuel flow factors, lift and drag bias, winds and sideslip angle are identified using only the inboard instrumentation such as the GPS/inertial sensors, a calibrated anemometric system and the angle-of-attack vanes relating each flight condition to a specific aircraft performance monitoring result. The results show that the proposed method captures the performance parameters by the use of the Kalman filter without the need of a strict stabilisation phase as it is recommended in the traditional specific range method, giving operators better flexibility when analysing and monitoring fleet performance.

Sign in / Sign up

Export Citation Format

Share Document