Dynamic determination of the dendritic growth direction within a complex-phase-field model

1995 ◽  
Vol 52 (4) ◽  
pp. 4553-4556 ◽  
Author(s):  
Royce Kam ◽  
Herbert Levine
2010 ◽  
Vol 97-101 ◽  
pp. 3769-3772 ◽  
Author(s):  
Chang Sheng Zhu ◽  
Jun Wei Wang

Based on a thin interface limit 3D phase-field model by coupled the anisotropy of interfacial energy and self-designed AADCR to improve on the computational methods for solving phase-field, 3D dendritic growth in pure undercooled melt is implemented successfully. The simulation authentically recreated the 3D dendritic morphological fromation, and receives the dendritic growth rule being consistent with crystallization mechanism. An example indicates that AADCR can decreased 70% computational time compared with not using algorithms for a 3D domain of size 300×300×300 grids, at the same time, the accelerated algorithms’ computed precision is higher and the redundancy is small, therefore, the accelerated method is really an effective method.


2021 ◽  
pp. 126461
Author(s):  
Sepideh Kavousi ◽  
Austin Gates ◽  
Lindsey Jin ◽  
Mohsen Asle Zaeem

2015 ◽  
Vol 12 (11) ◽  
pp. 4289-4296 ◽  
Author(s):  
Li Feng ◽  
Jinfang Jia ◽  
Changsheng Zhu ◽  
Yang Lu ◽  
Rongzhen Xiao ◽  
...  

2011 ◽  
Vol 228-229 ◽  
pp. 44-49
Author(s):  
Xun Feng Yuan ◽  
Yu Tian Ding

The phase-field model coupled with a flow field was used to simulate the dendrite growth in the undercooled pure metal melt. The effects of flow velocity, supercooling and anisotropy on the dendritic growth were studied. Results indicate that melt flow can enhance the emergence of side-branches, the morphology of the dendrite was composed of the principal branches and side-branches. With an increase in flow velocity and supercooling, the velocity of upstream dendritic tip increases, but the tip radius decreases first and then increases. With an increase in anisotropy values, the velocity of upstream dendritic tip increases and the tip radius decreases. The results of calculation agreed with LMK theory in the case of low flow velocity and anisotropy.


2011 ◽  
Vol 421 ◽  
pp. 574-577
Author(s):  
Wen Yuan Long ◽  
Ding Ping You ◽  
Jun Ping Yao ◽  
Hong Wan

We study the effect of force convection and temperature on the double dendrite growth during the solidification of binary alloy using a phase-field model. The mass and momentum conservation equations are solved using the Simple algorithm, and the thermal governing equation is numerically solved using an alternating implicit finite difference method. The results indicate that dendritic grows unsymmetrically under a forced flow, the growth velocity of the upstream tip is faster than the downstream tip. The downstream tip of the first dendrite and the upstream tip of the second dendrite are influenced each other, the upstream tip of the second dendrite will Coarsen, and the concentration at the boundary between them is the highest. Moreover, the interaction between the two dendrites is more and more obvious with the increasing of the temperature.


1996 ◽  
Vol 54 (3) ◽  
pp. 2797-2801 ◽  
Author(s):  
Royce Kam ◽  
Herbert Levine

Sign in / Sign up

Export Citation Format

Share Document