Entropy generation and heat transport of Cu–water nanoliquid in porous lid-driven cavity through magnetic field

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Souad Marzougui ◽  
Fateh Mebarek-Oudina ◽  
Mourad Magherbi ◽  
Ali Mchirgui
Keyword(s):  
Magnetic Field ◽  
Porous Medium ◽  
Heat Transport ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Total Entropy ◽  
Magnetic Field Effects ◽  
Content Type ◽  
Driven Cavity ◽  
Porous Enclosure

Purpose The purpose of this paper is to investigate the effects of Ha and the Nanoparticles (NP) volume fraction over the irreversibility and heat transport in Darcy–Forchheimer nanofluid saturated lid-driven porous medium. Design/methodology/approach The present paper highlights entropy generation because of mixed convection for a lid-driven porous enclosure filled through a nanoliquid and submitted to a uniform magnetic field. The analysis is achieved using Darcy–Brinkman–Forchheimer technique. The set of partial differential equations governing the considered system was numerically solved using the finite element method. Findings The main observations are as follows. The results indicate that the movement of horizontal wall is an important factor for the entropy generation inside the porous cavity filled through Cu–water nanoliquid. The variation of the thermal entropy generation is linear through NPs volume fraction. The total entropy generation reduces when the Darcy, Hartmann and the nanoparticle volume fraction increase. The porous media and magnetic field effects reduce the total entropy generation. Practical implications Interest in studying thermal interactions by convective flow within a saturating porous medium has many fundamental considerations and has received extensive consideration in the literature because of its usefulness in a large variety of engineering applications, such as the energy storage and solar collectors, crystal growth, food processing, nuclear reactors and cooling of electronic devices, etc. Originality/value By examining the literature, the authors found that little attention has been paid to entropy generation encountered during convection of nanofluids. Hence, this work aims to numerically study entropy generation and heat transport in a lid-driven porous enclosure filled with a nanoliquid.

Effects of magnetic field and viscous dissipation on entropy generation of mixed convection in porous lid-driven cavity with corner heater

2016 ◽  
Vol 26 (5) ◽  
pp. 1548-1566 ◽  
Author(s):  
Sameh E Ahmed ◽  
Hakan F. Öztop ◽  
Khaled Al-Salem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Heat Transfer Fluid ◽  
Content Type ◽  
Driven Cavity ◽  
Corner Heater

Purpose – The purpose of this paper is to investigate the effects of magnetic field and viscous dissipation on mixed convection heat transfer, fluid flow and entropy generation in a porous media filled square enclosure heated with corner isothermal heater. Design/methodology/approach – Finite volume method has been used to solve governing equations. A code is developed by FORTRAN and entropy generation is calculated from the obtained results of velocities and temperature. Results are presented via streamlines, isotherms, local and mean Nusselt number for different values of Richardson number (0.001=Ri=100), Hartmann number (0.001=Ha=100), Darcy number (0.001=Da=0.1), length of heaters (0.25=hx=hy=0.75) and viscous dissipation factors (10−4=ε=10−6). Findings – It is observed that entropy is generated mostly due to lid-driven wall and right side of the heater. Entropy generation decreases with increasing of Hartmann number and heat transfer increases with decreasing of viscous parameter. Originality/value – The originality of this work is to application of magnetic field and viscous dissipation on entropy generation in a lid-driven cavity with corner heater. Here, both corner heater and the external forces are original parameters.

Numerical investigation of conjugate heat transfer and entropy generation of MHD natural convection of nanofluid in an inclined enclosure

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amin Kardgar
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Fluid Flow ◽  
Natural Convection ◽  
Entropy Generation ◽  
Wall Thickness ◽  
Conjugate Heat Transfer ◽  
Volume Fraction ◽  
Content Type ◽  
Inclined Enclosure

Purpose The purpose of this paper is to investigate conjugate heat transfer of natural convection and entropy generation of nanofluid in the presence of external magnetic field via numerical approach in an inclined square cavity enclosure. Design/methodology/approach Control volume finite volume method with collocated arrangement of grids was used for discretization of continuity, momentum, solid and fluid energy equations. Rhie and Chow interpolation technique was applied to avoid checkerboard problem in pressure field and the well-established SIMPLE algorithm was followed to deal with the pressure and velocity coupling. The cavity is filled with water and nanoparticles of the aluminum oxide (Al2O3). This study has been conducted for the certain pertinent parameters of the volume fraction of nanoparticle (φ = 0–0.08), the angle of inclination (ϴ = 0°–330°), the Ra number (Ra = 103–108), the solid to fluid conductivity ratio (ksf = 1–400), the Ha number (Ha = 0–80) and the wall thickness ratio (δ/L = 0–0.3). Findings The results indicate that averaged Nu number increases by approximately 9% by increasing volume fraction from 0.0 to 0.08. Nu increases with an increasing inclination angle to 40° and decreases abruptly in 90° because of the formation of two weaker vorticity with opposite circulation pattern intensifying the density of isotherm curves in a vertical direction. Nu increases sharply with increasing Ra more than 105. Nu also augments almost 67% by increasing ksf = 1 to ksf = 50 and remains constant by increasing ksf more than 50. Nu number reduction is almost 72% with a variation of wall thickness ratio from d/L = 0 to 0.3. Entropy generation because of fluid flow, magnetic field and heat transfer reduces linearly almost 30%, 19% and 16% by increasing volume fraction, respectively. With increasing ksf, entropy generation because of fluid flow, magnetic field and heat transfer increases asymptotically, but Bejan number decreases. Originality/value A brief review of conducted research studies in nanofluid flow and heat transfer reveals that the effect of wall thermal inertia was not investigated in MHD natural convection of nanofluids in an inclined enclosure. The aim of the present study is to analyze conjugate heat transfer in an inclined cavity filled with water and Al2O3.

Effect of Magnetic Field on Natural Convection and Entropy Generation in Al2O3/Water Nanofluid-Filled Enclosure With Twin Protruding Heat Sources

2017 ◽  
Vol 9 (2) ◽  
Author(s):  
Prasanth Anand Kumar Lam ◽  
K. Arul Prakash
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Entropy Generation ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Heat Sources ◽  
Nanoparticle Volume Fraction ◽  
Total Entropy ◽  
Staggered Arrangement ◽  
Bottom Heat

In this paper, the effect of magnetic field on natural convection of Al2O3/water nanofluid in an enclosure containing twin protruding heat sources placed on top and bottom walls arranged in-line and staggered manner is presented. For this purpose, coupled equations governing fluid flow and heat transfer are solved in Cartesian framework using streamline upwind/Petrov–Galerkin (SUPG) finite element method. Numerical computations are performed to predict the fluid flow, heat transfer, and entropy generation for a wide range of Hartmann number (0.0 ≤ Ha ≤ 100.0), Rayleigh number (103≤Ra≤106), and nanoparticle volume fraction (0.0≤ϕ≤0.1). The simulated results indicate that, for both in-line and staggered arrangement, the entropy generation due to heat transfer is significant along isothermal surfaces, whereas entropy generation due to fluid friction is higher at no-slip walls and along the regions of contact between adjacent recirculation cells. For both in-line and staggered arrangement, increase in global total entropy generation and average Nusselt number along top and bottom heat sources is obtained with decreasing Ha and increasing Ra. Furthermore, for both in-line and staggered arrangement, variation in global total entropy generation and average Nusselt number along top and bottom heat sources with increasing nanoparticle volume fraction, depend on both Ha and Ra.

Optimization of entropy generation in motion of magnetite-Fe3O4 nanoparticles due to curved stretching sheet of variable thickness

2019 ◽  
Vol 29 (9) ◽  
pp. 3347-3365
Author(s):  
Sumaira Qayyum ◽  
Tasawar Hayat ◽  
Ahmed Alsaedi
Keyword(s):  
Porous Medium ◽  
Mixed Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Variable Thickness ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Bejan Number ◽  
Content Type ◽  
Curvature Parameter

Purpose Investigation for convective flow of water-based nanofluid (composed of ferric oxide asnanoparticles) by curved stretching sheet of variable thickness is made. Bejan number andentropy generation analysis is presented in presence of viscous dissipation, mixed convectionand porous medium. Design/methodology/approach In this paper, by using NDSolve of MATHEMATICA, the nonlinear system of equations is solved. Velocity, temperature, Bejan number and entropy generation for involved dimensionless variables are discussed. Findings Increase in velocity is depicted for larger curvature parameter, and opposite trend is witnessed for higher nanoparticle volume concentration. Enhancement in temperature is seen for higher Eckert number while reverse behavior is noticed for larger curvature parameter. Entropy rate increases for variation of curvature parameter, Brinkman number and nanoparticle volume fraction. Bejan number decays for mixed convection and curvature parameters. Originality/value To the authors’ knowledge, there exists no study yet which describes flow by curved sheet of variable thickness. Such consideration with nanoparticles seems important task. Thus, the main objective here is to determine entropy generation in ferromagnetic nanofluid flow due to variable thickened curved stretching surface. Additionally, effects of Joule heating, porous medium, mixed convection and viscous dissipation are taken into account.

Appraising conjugate heat transfer, heatlines visualization and entropy generation of Ag-MgO/H2O hybrid nanofluid in a partitioned medium

2020 ◽  
Vol 30 (10) ◽  
pp. 4529-4562 ◽  
Author(s):  
Mokhtar Ferhi ◽  
Ridha Djebali
Keyword(s):  
Heat Transfer ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Volume Fraction ◽  
Bejan Number ◽  
Horizontal Position ◽  
Total Entropy ◽  
Content Type ◽  
Conjugate Natural Convection ◽  
Partitioned Medium

Purpose This paper aims to perform the lattice Boltzmann simulation of conjugate natural convection heat transfer, heat flow visualization via heatlines approach and entropy generation in a partitioned medium filled with Ag-MgO (15-85%)/water. Design/methodology/approach The lattice Boltzmann method (LBM) is used to predict the dynamic and thermal behaviors. Experimental correlations for dynamic viscosity and thermal conductivity versus solid volume fraction are used. The study is conducted for the ranges of Rayleigh number 103 ≤ Ra ≤ 106, the partitioner thickness 0.01 ≤ δ ≤ 0.9, its position 0.15 ≤ Xs ≤ 0.85 and the hybrid nano-suspensions volume fraction 0% ≤ ϕ ≤ 2%. Findings The effects of varying of controlling parameters on the convective flow patterns, temperature contours, heat transfers, the heatlines and the entropy generation are presented. It has been found that the maximum rate of heat transfer enhancement occurs for low Ra numbers (103) and is close to 13.52%. The solid thickness d and its horizontal position Xs have a substantial influence on the heat transfer rate, flow structure, heatline, total entropy generation and Bejan number. Besides, the maximum heat transfer is detected for high Ra and δ ≈ 1 and the percentage of augmentation is equal to 65.55% for ϕ = 2%. According to the horizontal position, the heat transfer remains invariant for Ra = 103 and takes a maximum value near the active walls for Ra ≥ 104. The total entropy generation increases with Ra and decreases with ϕ for Ra = 106. The increase of ϕ from 0 to 2% leads to a reduction in close to 40.76%. For this value of Ra, the entropy is the maximum for δ = 0.4 and Xs = 0.35 and Xs = 0.65%. Moreover, as the Ra increases the Bejan number undergoes a decrease. The Bejan number is the maximum for Ra = 103 independently to δ and Xs. The superior thermal performance manifests at low Ra and high value of δ independently to the positions of the conducting body. Originality/value The originality of this paper is to analyze the hybrid nano-additive effects on the two-dimensional conjugate natural convection in a partitioned medium using the LBM. The experimental correlations used for the effective thermal conductivity and dynamic viscosity give credibility to our study. Different approaches such as heatlines and entropy generation are used.

scholarly journals Jet Impingement Heat Transfer of Confined Single and Double Jets with Non-Newtonian Power Law Nanofluid under the Inclined Magnetic Field Effects for a Partly Curved Heated Wall

2021 ◽  
Vol 13 (9) ◽  
pp. 5086
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Oztop ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Particle Size ◽  
Aspect Ratio ◽  
Power Law ◽  
Volume Fraction ◽  
Inclined Magnetic Field ◽  
Magnetic Field Effects ◽  
Power Law Nanofluid ◽  
Power Law Index

Single and double impinging jets heat transfer of non-Newtonian power law nanofluid on a partly curved surface under the inclined magnetic field effects is analyzed with finite element method. The numerical work is performed for various values of Reynolds number (Re, between 100 and 300), Hartmann number (Ha, between 0 and 10), magnetic field inclination (γ, between 0 and 90), curved wall aspect ratio (AR, between 01. and 1.2), power law index (n, between 0.8 and 1.2), nanoparticle volume fraction (ϕ, between 0 and 0.04) and particle size in nm (dp, between 20 and 80). The amount of rise in average Nusselt (Nu) number with Re number depends upon the power law index while the discrepancy between the Newtonian fluid case becomes higher with higher values of power law indices. As compared to case with n = 1, discrepancy in the average Nu number are obtained as −38% and 71.5% for cases with n = 0.8 and n = 1.2. The magnetic field strength and inclination can be used to control the size and number or vortices. As magnetic field is imposed at the higher strength, the average Nu reduces by about 26.6% and 7.5% for single and double jets with n greater than 1 while it increases by about 4.78% and 12.58% with n less than 1. The inclination of magnetic field also plays an important role on the amount of enhancement in the average Nu number for different n values. The aspect ratio of the curved wall affects the flow field slightly while the average Nu variation becomes 5%. Average Nu number increases with higher solid particle volume fraction and with smaller particle size. At the highest particle size, it is increased by about 14%. There is 7% variation in the average Nu number when cases with lowest and highest particle size are compared. Finally, convective heat transfer performance modeling with four inputs and one output is successfully obtained by using Adaptive Neuro-Fuzzy Interface System (ANFIS) which provides fast and accurate prediction results.

Effects of moving lid direction on mixed convection and entropy generation in a cubical cavity with longitudinal triangular fin insertion

2017 ◽  
Vol 27 (4) ◽  
pp. 839-860 ◽  
Author(s):  
Lioua Kolsi ◽  
Hakan F. Öztop ◽  
Nidal Abu-Hamdeh ◽  
Borjini Mohamad Naceur ◽  
Habib Ben Assia
Keyword(s):  
Mixed Convection ◽  
Entropy Generation ◽  
Three Dimensional ◽  
Thermal Conductivity Ratio ◽  
Governing Equations ◽  
Content Type ◽  
Driven Cavity ◽  
Triangular Fin ◽  
Cubical Cavity ◽  
3D Problem

Purpose The main purpose of this work is to arrive at a three-dimensional (3D) numerical solution on mixed convection in a cubic cavity with a longitudinally located triangular fin in different sides. Design/methodology/approach The 3D governing equations are solved via finite volume technique by writing a code in FORTRAN platform. The governing parameters are chosen as Richardson number, 0.01 ≤ Ri ≤ 10 and thermal conductivity ratio 0.01 ≤ Rc ≤ 100 for fixed parameters of Pr = 0.7 and Re = 100. Two cases are considered for a lid-driven wall from left to right (V+) and right to left (V−). Findings It is observed that entropy generation due to heat transfer becomes dominant onto entropy generation because of fluid friction. The most important parameter is the direction of the moving lid, and lower values are obtained when the lid moves from right to left. Originality The main originality of this work is to arrive at a solution of a 3D problem of mixed convection and entropy generation for lid-driven cavity with conductive triangular fin attachments.

Sign in / Sign up

Export Citation Format

Share Document