scholarly journals A finite element analysis on combined convection and conduction in a channel with a thick walled cavity

2014 ◽  
Vol 24 (8) ◽  
pp. 1888-1905 ◽  
Author(s):  
M.M. Rahman ◽  
Hakan Oztop ◽  
S. Mekhilef ◽  
R. Saidur ◽  
A. Chamkha ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Mixed Convection ◽  
Conjugate Heat Transfer ◽  
Transfer Problem ◽  
Thick Wall ◽  
Thermal Conductivity Ratio ◽  
Element Analysis ◽  
Content Type ◽  
Combined Convection

Purpose – The purpose of this paper is to examine the effects of thick wall parameters of a cavity on combined convection in a channel. In other words, conjugate heat transfer is solved. Design/methodology/approach – Galerkin weighted residual finite element method is used to solve the governing equations of mixed convection. Findings – The streamlines, isotherms, local and average Nusselt numbers are obtained and presented for different parameters. It is found heat transfer is an increasing function of dimensionless thermal conductivity ratio. Originality/value – The literature does not have mixed convection and conjugate heat transfer problem in a channel with thick walled cavity.

Conjugate heat transfer in porous triangular enclosures with thick bottom wall

2009 ◽  
Vol 19 (5) ◽  
pp. 650-664 ◽  
Author(s):  
Yasin Varol ◽  
Hakan F. Oztop ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Natural Convection ◽  
Conjugate Heat Transfer ◽  
Bottom Wall ◽  
Thick Wall ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Governing Equations ◽  
Content Type

PurposeThe purpose of this paper is to study the conjugate heat transfer via natural convection and conduction in a triangular enclosure filled with a porous medium.Design/methodology/approachDarcy flow model was used to write governing equations with Boussinesq approximation. The transformed governing equations are solved numerically using a finite difference technique. It is assumed that the enclosure consists of a conducting bottom wall of finite thickness, an adiabatic (insulated) vertical wall and a cooled inclined wall.FindingsFlow patterns, temperature and heat transfer were presented at different dimensionless thickness of the bottom wall, h, from 0.05 to 0.3, different thermal conductivity ratio between solid material and fluid, k, from 0.44 to 283 and Rayleigh numbers, Ra, from 100 to 1000. It is found that both thermal conductivity ratio and thickness of the bottom wall can be used as control parameters for heat transport and flow field.Originality/valueIt is believed that this is the first paper on conduction‐natural convection in porous media filled triangular enclosures with thick wall. In the last years, most of the researchers focused on regular geometries such as rectangular or square cavity bounded by thick wall.

Temperature identification of a heat source in conjugate heat transfer problems via an inverse analysis

2019 ◽  
Vol 29 (10) ◽  
pp. 3994-4010 ◽  
Author(s):  
Peyman Mayeli ◽  
Mehdi Nikfar
Keyword(s):  
Heat Transfer ◽  
Heat Source ◽  
Inverse Analysis ◽  
Conjugate Heat Transfer ◽  
Transfer Problem ◽  
Thermal Conductivity Ratio ◽  
Interface Temperature ◽  
Content Type ◽  
Inverse Design Problem ◽  
Transfer Problems

Purpose The present study aims to perform inverse analysis of a conjugate heat transfer problem including conduction and forced convection via the quasi-Newton method. The inverse analysis is defined for a heat source that is surrounded by a solid medium which is exposed to a free stream in external flow. Design/methodology/approach The objective of the inverse design problem is finding temperature distribution of the heat source as thermal boundary condition to establish a prescribed temperature along the interface of solid body and fluid. This problem is a simplified version of thermal-based ice protection systems in which the formation of ice is avoided by maintaining the interface of fluid and solid at a specified temperature. Findings The effects of the different pertinent parameters such as Reynolds number, interface temperature and thermal conductivity ratio of fluid and solid mediums are analyzed. Originality/value This paper fulfils the analysis to study how thermal based anti-icing system can be used with different heat source shapes.

Finite element analysis of water-based Ferrofluid flow in a partially heated triangular cavity

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Muhammad Usman ◽  
Muhammad Hamid ◽  
Zafar Hayat Khan ◽  
Rizwan Ul Haq ◽  
Waqar Ahmed Khan
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Nusselt Number ◽  
Volume Fraction ◽  
Vertical Wall ◽  
Heating Element ◽  
Dimensionless Temperature ◽  
Dimensionless Numbers ◽  
Element Analysis ◽  
Content Type

Purpose This study aims to deal with the numerical investigation of ferrofluid flow and heat transfer inside a right-angle triangular cavity in the presence of a magnetic field. The vertical wall is partially heated, whereas other walls are kept cold. The effects of thermal radiation are included in the analysis. The governing equations including continuity, momentum and energy equations are converted to nondimensional form using viable variables. Design/methodology/approach Finite element method (FEM)-based simulations are performed using finite element approach to investigate the effects of the volume fraction of ferroparticles (Fe3O4), the length of the heating element and the dimensionless numbers including Rayleigh and Hartmann numbers on the streamlines, isotherms and Nusselt number. Findings It is demonstrated that both horizontal and vertical velocity components increase with the length of the heating element, whereas the dimensionless temperature decreases the heating domain. It is observed that an increase of 10% in the volume fraction of ferroparticles increases Nusselt number more than 12%, and 20% increase in the volume fraction of ferroparticles increases more than 30%, depending upon the length of the heating element. Originality/value This is a new study showing the significance of the magnetic nanoparticles for the enhancement of heat transfer rate in a triangular cavity.

Modeling and simulation of frictional disc/pad interface considering the effects of thermo-mechanical coupling

2020 ◽  
Vol 17 (6) ◽  
pp. 761-784
Author(s):  
Ali Belhocine ◽  
Oday Ibraheem Abdullah
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Von Mises Stress ◽  
Brake Disc ◽  
Fe Model ◽  
Cooling Mode ◽  
Element Analysis ◽  
Content Type ◽  
Computational Fluid Dynamics Analysis ◽  
Brake Discs

Purpose This study aims to investigate numerically a thermomechanical behavior of disc brake using ANSYS 11.0 which applies the finite element method (FEM) to solve the transient thermal analysis and the static structural sequentially with the coupled method. Computational fluid dynamics analysis will help the authors in the calculation of the values of the heat transfer (h) that will be exploited in the transient evolution of the brake disc temperatures. Finally, the model resolution allows the authors to visualize other important results of this research such as the deformations and the Von Mises stress on the disc, as well as the contact pressure of the brake pads. Design/methodology/approach A transient finite element analysis (FEA) model was developed to calculate the temperature distribution of the brake rotor with respect to time. A steady-state CFD model was created to obtain convective heat transfer coefficients (HTC) that were used in the FE model. Because HTCs are dependent on temperature, it was necessary to couple the CFD and FEA solutions. A comparison was made between the temperature of full and ventilated brake disc showing the importance of cooling mode in the design of automobile discs. Findings These results are quite in good agreement with those found in reality in the brake discs in service and those that may be encountered before in literature research investigations of which these will be very useful for engineers and in the design field in the vehicle brake system industry. These are then compared to experimental results obtained from literatures that measured ventilated discs surface temperatures to validate the accuracy of the results from this simulation model. Originality/value The novelty of the work is the application of the FEM to solve the thermomechanical problem in which the results of this analysis are in accordance with the realized and in the current life of the braking phenomenon and in the brake discs in service thus with the thermal gradients and the phenomena of damage observed on used discs brake.

Upward and downward conjugate mixed convection heat transfer in a partially porous cavity

2016 ◽  
Vol 26 (1) ◽  
pp. 159-188 ◽  
Author(s):  
Abderrahim Bourouis ◽  
Abdeslam Omara ◽  
Said Abboudi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Mixed Convection ◽  
Transfer Rate ◽  
Vertical Wall ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Content Type ◽  
Moving Wall ◽  
The Right

Purpose – The purpose of this paper is to provide a numerical study of conjugate heat transfer by mixed convection and conduction in a lid-driven enclosure with thick vertical porous layer. The effect of the relevant parameters: Richardson number (Ri=0.1, 1, 10) and thermal conductivity ratio (Rk=0.1, 1, 10, 100) are investigated. Design/methodology/approach – The studied system is a two dimensional lid-driven enclosure with thick vertical porous layer. The left vertical wall of the enclosure is allowed to move in its own plane at a constant velocity. The enclosure is heated from the right vertical wall isothermally. The left and the right vertical walls are isothermal but temperature of the outside of the right vertical wall is higher than that of the left vertical wall. Horizontal walls are insulated. The governing equations are solved by finite volume method and the SIMPLE algorithm. Findings – From the finding results, it is observed that: for the two studied cases, heat transfer rate along the hot wall is a decreasing function of thermal conductivity ratio irrespective of Richardson numbers contrary to the heat transfer rate along the fluid-porous layer interface which is an increasing function of thermal conductivity ratio. At forced convection dominant regime, the difference between heat transfer rate for upward and downward moving wall is insensitive to the thermal conductivity ratio. For downward moving wall, average Nusselt number is higher than that of upward moving wall. Practical implications – Some applications: building applications, furnace design, nuclear reactors, air solar collectors. Originality/value – From the bibliographic work and the authors’ knowledge, the conjugate mixed convection in lid-driven partially porous enclosures has not yet been investigated which motivates the present work that represent a continuation of the preceding investigations.

Nonhomogeneous model for conjugate mixed convection of nanofluid and entropy generation in an enclosure in presence of inclined magnetic field with Joule heating

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Subhasree Dutta ◽  
Somnath Bhattacharyya ◽  
Ioan Pop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Mixed Convection ◽  
Entropy Generation ◽  
Joule Heating ◽  
Conjugate Heat Transfer ◽  
Inclined Magnetic Field ◽  
Content Type ◽  
The Impact ◽  
The Magnetic Field

Purpose This study aims to numerically analyse the impact of an inclined magnetic field and Joule heating on the conjugate heat transfer because of the mixed convection of an Al2O3–water nanofluid in a thick wall enclosure. Design/methodology/approach A horizontal temperature gradient together with the shear-driven Flow creates the mixed convection inside the enclosure. The nonhomogeneous model, in which the nanoparticles have a slip velocity because of thermophoresis and Brownian diffusion, is adopted in the present study. The thermal performance is evaluated by determining the entropy generation, which includes the contribution because of magnetic field. A control volume method over a staggered grid arrangement is adopted to compute the governing equations. Findings The Lorentz force created by the applied magnetic field has an adverse effect on the flow and thermal field, and consequently, the heat transfer and entropy generation attenuate because of the presence of magnetic force. The Joule heating enhances the fluid temperature but attenuates the heat transfer. The impact of the magnetic field diminishes as the angle of inclination of the magnetic field is increased, and it manifests as the volume fraction of nanoparticles is increased. Addition of nanoparticles enhances both the heat transfer and entropy generation compared to the clear fluid with enhancement in entropy generation higher than the rate by which the heat transfer augments. The average Bejan number and mixing-cup temperature are evaluated to analyse the thermodynamic characteristics of the nanofluid. Originality/value This literature survey suggests that the impact of an inclined magnetic field and Joule heating on conjugate heat transfer based on a two-phase model has not been addressed before. The impact of the relative slip velocity of nanoparticles diminishes as the magnetic field becomes stronger.

Sign in / Sign up

Export Citation Format

Share Document