Characteristics of J-shaped monopole antenna array with matching circuit at UHF band

Author(s):  
S. Kashihara ◽  
F. Kuroki
2020 ◽  
Vol 10 (13) ◽  
pp. 4546
Author(s):  
Tarek S. Mneesy ◽  
Radwa K. Hamad ◽  
Amira I. Zaki ◽  
Wael A. E. Ali

This paper presented the design and implementation of a 60 GHz single element monopole antenna as well as a two-element array made of two 60 GHz monopole antennas. The proposed antenna array was used for 5G applications with radiation characteristics that conformed to the requirements of wireless communication systems. The proposed single element was designed and optimized to work at 60 GHz with a bandwidth of 6.6 GHz (57.2–63.8 GHz) and a maximum gain of 11.6 dB. The design was optimized by double T-shaped structures that were added in the rectangular slots, as well as two external stubs in order to achieve a highly directed radiation pattern. Moreover, ring and circular slots were made in the partial ground plane at an optimized distance as a defected ground structure (DGS) to improve the impedance bandwidth in the desired band. The two-element array was fed by a feed network, thus improving both the impedance bandwidth and gain. The single element and array were fabricated, and the measured and simulated results mimicked each other in both return loss and antenna gain.


2014 ◽  
Vol 56 (4) ◽  
pp. 896-900 ◽  
Author(s):  
Chien-Jen Wang ◽  
Yun-Lin Lee
Keyword(s):  

PLoS ONE ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. e0214637
Author(s):  
A. S. M. Zahid Kausar ◽  
David C. Reutens ◽  
Ewald Weber ◽  
Viktor Vegh

Circuit World ◽  
2019 ◽  
Vol 45 (4) ◽  
pp. 257-267 ◽  
Author(s):  
Jayshri Sharad Kulkarni ◽  
Raju Seenivasan

Purpose This paper aims to present a triple-band monopole antenna design of 0.2-mm thickness with an overall dimension of 21 × 8 mm2 for wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) multiple input and multiple output (MIMO) applications in the laptop computer. Design/methodology/approach It comprises three monopole radiating elements, namely, strip AD (inverted C), strip EG (inverted J) and strip FI (inverted U) along with two rectangular open-end tuning stubs, namely, “m” and “n” of size 1.5 × 0.9 mm2 and 1.8 × 0.9 mm2, respectively. The proposed structure is compact, cost-effective and easy to integrate inside the laptop computers. Findings This structure excites three WLAN (2.4/5.2/5.8 GHz) and three WiMAX (2.3/3.3/5.5 GHz) bands. The proposed antenna array elucidates that it has measured −10dB impedance bandwidth of 11.86 per cent (2.22-2.50) GHz in a lower band (f_l), 6.83 per cent (3.25-3.48) GHz in medium band (f_m) and 16.84 per cent (5.00-5.92) GHz in upper band (f_u). The measured gain and radiation efficiency are above 3.64dBi and 75 per cent, respectively, and isolation better than −20dB. The envelope correlation coefficient (ECC) is less than 0.004. The simulated and measured results are in good concurrence, which confirms the applicability of the proposed antenna array for MIMO applications in the laptop computer. Originality/value The proposed antenna is designed without using vias, reactive elements and matching circuits for excitation of WLAN/WiMAX bands in the laptop computers. The design also does not require any additional ground for mounting the antenna. Further, the antenna array, formed by using the same antenna design, does not need additional isolating elements and is designed in such a way that the system ground itself acts as an isolating element. The proposed antenna has a low profile and is ultra-thin, cost-effective and easy to manufacture and can be easily embedded inside the next-generation laptop computers.


Sign in / Sign up

Export Citation Format

Share Document