Operation and Control Strategy of Energy Management System for LVDC Distribution System

Author(s):  
Hoon Lee ◽  
Jin-Wook Kang ◽  
Bong-Yeon Choi ◽  
Kyung-Min Kang ◽  
Chang-Gyun An ◽  
...  
Author(s):  
Taufik Ridwan

As one manufacturing industry with a large level of energy consumption makes energy management mandatory applied at PT. XYZ, the purpose of this research is to design energy management system implementation strategy in PT. XYZ based on ISO 50001. Started by self assessment and by collecting data on the use of primary energy sources in the company, followed by processing and analyzing using simple linear regression. The self assessment results show 38% of the total value’s completeness of existing program in the clause of ISO 50001. From the processing and analyzing’s energy usage showed energy baseline and energy performance indicators (EnPI) of the company. The result of research is identifies and proposes the potential of energy savings in air compressor distribution system, steam boiler distribution, and electrical distribution system with good housekeeping, control system, and modification, proposes the energy management system implementation based on Deming’s PDCA cycle, and continued by recommending roadmap towards the implementation of energy management systems. 


2020 ◽  
Vol 24 (5 Part B) ◽  
pp. 3157-3166
Author(s):  
Shengtao Xiong ◽  
Zhenxing Liu ◽  
Qunqiao Li ◽  
Yuan Chen ◽  
Xiaoyan Cai ◽  
...  

To explore the performance of the ground source thermal energy management system under the cold and heat sources, based on the cold and heat auxiliary technology, a ground source thermal energy composite management system is constructed and simulated. The constructed ground source heat pump-refrigeration unit-hybrid heating management system of urban heating networks, as well as the simple system, are analyzed and investigated in terms of power consumption and underground temperature control. The research results show that the constructed ground source heat pump-refrigeration unit-hybrid heating management system of the urban heating network has lower power and energy consumption than a simple system during the same period, which meets the economic requirements and guarantees the system with relatively low energy consumption. For underground temperature control, the constructed system is more stable than a simple system without excessive temperature fluctuations. The operation control strategy of the constructed system is mainly for chiller units, heat pump units, cooling towers, source side, and side circulation water pump modules. In summary, the constructed ground source heat pump-refrigeration unit-hybrid heating management system of an urban heating network based on the ground source heat pump meets the requirements for energy consumption and temperature control and can operate the control strategy normally. The results are significant for subsequent researches on the ground source thermal energy management system based on cold and heat auxiliary technology.


Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4551
Author(s):  
Juyong Kim ◽  
Hongjoo Kim ◽  
Jintae Cho ◽  
Youngpyo Cho ◽  
Yoonsung Cho ◽  
...  

This paper is about the development of the real-time direct current (DC) network analysis applications for the operation of DC power systems. The applications are located in the central energy management system (EMS) and provide the operator with the optimal solution for operation in real time. Developed DC applications are not limited by voltage level. Applications can be used at all DC voltage levels such as low voltage, medium voltage and high voltage. A program configuration and sequence for analyzing the DC distribution system are suggested. Algorithms of each program are presented and the differences when compared with the processes of the applications of the existing alternating current (AC) systems are analyzed. The DC grid demonstration site at the Korea Electric Power Corporation (KEPCO) power testing center is introduced. The details of EMS and applications installation are described. The developed DC applications were installed in the EMS of the demonstration site and verification tests have been carried out. The configuration of the test scenario for testing the voltage control of the DC network is described. The voltage control result is analyzed and the measured data and the results of the applications are verified for compatibility by comparing them with the results of an off-line simulation tool. Finally, the future direction of the development of technology for the operation of the DC grid is introduced.


Sign in / Sign up

Export Citation Format

Share Document