Optimization of Carboxymethyl Cellulose and Calcium Chloride Dip-Coating on Mushroom Slices Prior to Hot Air Drying Using Response Surface Methodology

2013 ◽  
Vol 38 (3) ◽  
pp. 1269-1278 ◽  
Author(s):  
Somayeh Taghian Dinani ◽  
Nasser Hamdami ◽  
Mohammad Shahedi ◽  
Javad Keramat
Processes ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 745 ◽  
Author(s):  
Hanyang Wang ◽  
Dan Liu ◽  
Haiming Yu ◽  
Donghai Wang ◽  
Jun Li

The effect of microwave coupled hot air drying on rehydration ratio (RR) and total sugar content (TSC) of Chinese yam was investigated. Single factor test and response surface methodology were used for process parameter optimization with hot air temperature, hot air velocity, slice thickness, and microwave power density as variables and RR and TSC of dried products as responses. The effect of variables on RR followed the order: slice thickness > hot air temperature > microwave power density > hot air velocity. The effect of variables on TSC followed the order: slice thickness > microwave power density > hot air velocity > hot air temperature. The optimized process parameters were hot air velocity of 2.5 m/s, hot air temperature of 61.7 °C, slice thickness of 8.5 mm, and microwave power density of 5.9 W/g. Under the optimal conditions, the predicted values of RR and TSC were 1.90 g/g and 5.74 g/100 g, respectively, which is very close to corresponding actual values (1.83 g/g and 5.72 g/100 g). The desirability of 0.913 further validated the effectiveness of the model. The findings from this work may apply to other agricultural products.


2021 ◽  
Vol 2120 (1) ◽  
pp. 012003
Author(s):  
R Sukumaran ◽  
B L Chua ◽  
N Ismail

Abstract Eucalyptus deglupta is one of the promising medicinal plants from Mytracea family consisting of bioactive compounds that are to be used in medications. The bioactive compounds present in Eucalyptus deglupta were extracted at the best yield using a hybrid drying method consisting of ultrasound assisted osmotic dehydration (UOAD) and hot air drying in this study. The drying conditions of UAOD were optimised with response surface methodology (RSM) to attain the highest antioxidant activity via of DPPH radical scavenging assay. Four parameters were optimised with response surface methodology, namely concentration of sucrose (v/w), temperature (°C), duration of drying and intensity of ultrasound (%) ranged from 30% to 50%, 20°C to 60°C, 40 min to 100 min and 60% to 100%, respectively. A series of 27 combinations of the UAOD drying conditions were performed and followed by hot air drying performed at 60°C until a constant weight was achieved. A moderate scavenging activity of DPPH assay (56.12%) was achieved at a concentration of sucrose, temperature, duration of drying and intensity of ultrasound of 50%, 40°C, 100 min and 264 W, respectively.


Sign in / Sign up

Export Citation Format

Share Document