scholarly journals Application of the Electronic Differential Analyzer to the Oscillation of Beams, Including Shear and Rotary Inertia

1955 ◽  
Vol 22 (1) ◽  
pp. 13-19
Author(s):  
C. E. Howe ◽  
R. M. Howe

Abstract The equations for normal modes of lateral vibration of beams are set up on the electronic differential analyzer. Beam deflections due to transverse shear and rotary-inertia forces are included. The differential analyzer is shown to be a fast and accurate method for solving the problem. Analyzer outputs include mode shape, slope, bending moment, and shear force along the beam. Curves showing the normal-mode frequencies for the first three modes of vibration of a uniform free-free beam are presented for a wide range of transverse shear and rotary-inertia parameters. The electronic differential analyzer also is utilized to solve the problem of lateral vibration of nonuniform beams.

1950 ◽  
Vol 17 (4) ◽  
pp. 448-453 ◽  
Author(s):  
Dana Young

Abstract Ritz’s method is one of several possible procedures for obtaining approximate solutions for the frequencies and modes of vibration of thin elastic plates. The accuracy of the results and the practicability of the computations depend to a great extent upon the set of functions that is chosen to represent the plate deflection. In this investigation, use is made of the functions which define the normal modes of vibration of a uniform beam. Tables of values of these functions have been computed as well as values of different integrals of the functions and their derivatives. With the aid of these data, the necessary equations can be set up and solved with reasonable effort. Solutions are obtained for three specific plate problems, namely, (a) square plate clamped at all four edges, (b) square plate clamped along two adjacent edges and free along the other two edges, and (c) square plate clamped along one edge and free along the other three edges.


1975 ◽  
Vol 42 (4) ◽  
pp. 878-880 ◽  
Author(s):  
D. A. Grant

In this paper the author obtains the frequency equation for the normal modes of vibration of uniform beams with linear translational and rotational springs at one end and having a concentrated mass at the other free end. The eigenfrequencies for the fundamental mode are given for a wide range of values of mass ratio, mass moment of inertia ratios, and stiffness ratios.


1968 ◽  
Vol 72 (688) ◽  
pp. 341-344 ◽  
Author(s):  
B. Dawson

Summary The natural frequencies of vibration of a cantilever beam allowing for rotary inertia and shear deformation are obtained by the approximate Ritz method. The workability of the method is dependent upon the approximating functions chosen for the dynamic displacement curves. A series of characteristic functions representing the normal modes of vibration of cantilever beams in simple flexure is used as the approximating functions for both deflections due to flexure and shear deformation. Good agreement is shown between frequencies obtained by the Ritz method and those resulting from an analytical solution. The effect upon the natural frequencies of allowing for rotary inertia alone is shown and it is seen to increase rapidly with mode number.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (04) ◽  
pp. 231-240
Author(s):  
Douglas Coffin ◽  
Joel Panek

A transverse shear strain was utilized to characterize the severity of creasing for a wide range of tooling configurations. An analytic expression of transverse shear strain, which accounts for tooling geometry, correlated well with relative crease strength and springback as determined from 90° fold tests. The experimental results show a minimum strain (elastic limit) that needs to be exceeded for the relative crease strength to be reduced. The theory predicts a maximum achievable transverse shear strain, which is further limited if the tooling clearance is negative. The elastic limit and maximum strain thus describe the range of interest for effective creasing. In this range, cross direction (CD)-creased samples were more sensitive to creasing than machine direction (MD)-creased samples, but the differences were reduced as the shear strain approached the maximum. The presented development provides the foundation for a quantitative engineering approach to creasing and folding operations.


Author(s):  
Jozefien De Bock

Historically, those societies that have the longest tradition in multicultural policies are settler societies. The question of how to deal with temporary migrants has only recently aroused their interest. In Europe, temporary migration programmes have a much longer history. In the period after WWII, a wide range of legal frameworks were set up to import temporary workers, who came to be known as guest workers. In the end, many of these ‘guests’ settled in Europe permanently. Their presence lay at the basis of European multicultural policies. However, when these policies were drafted, the former mobility of guest workers had been forgotten. This chapter will focus on this mobility of initially temporary workers, comparing the period of economic growth 1945-1974 with the years after the 1974 economic crisis. Further, it will look at the kind of policies that were developed towards guest workers in the era before multiculturalism. This way, it shows how their consideration as temporary residents had far-reaching consequences for the immigrants, their descendants and the receiving societies involved. The chapter will finish by suggesting a number of lessons from the past. If the mobility-gap between guest workers and present-day migrants is not as big as generally assumed, then the consequences of previous neglect should serve as a warning for future policy making.


2016 ◽  
Vol 3 (2) ◽  
pp. 82-93
Author(s):  
Gugulethu Shamaine Nkala ◽  
Rodreck David

Knowledge presented by Oral History (OH) is unique in that it shares the tacit perspective, thoughts, opinions and understanding of the interviewee in its primary form. While teachers, lecturers and other education specialists have at their disposal a wide range of primary, secondary and tertiary sources upon which to relate and share or impart knowledge, OH presents a rich source of information that can improve the learning and knowledge impartation experience. The uniqueness of OH is presented in the following advantages of its use: it allows one to learn about the perspectives of individuals who might not otherwise appear in the historical record; it allows one to compensate for the digital age; one can learn different kinds of information; it provides historical actors with an opportunity to tell their own stories in their own words; and it offers a rich opportunity for human interaction. This article discusses the placement of oral history in the classroom set-up by investigating its use as a source of learning material presented by the National Archives of Zimbabwe to students in the Department of Records and Archives Management at the National University of Science and Technology (NUST). Interviews and a group discussion were used to gather data from an archivist at the National Archives of Zimbabwe, lecturers and students in the Department of Records and Archives Management at NUST, respectively. These groups were approached on the usability, uniqueness and other characteristics that support this type of knowledge about OH in a tertiary learning experience. The findings indicate several qualities that reflect the richness of OH as a teaching source material in a classroom set-up. It further points to weak areas that may be addressed where the source is considered a viable strategy for knowledge sharing and learning. The researchers present a possible model that can be used to champion the use of this rich knowledge source in classroom education at this university and in similar set-ups. 


2003 ◽  
Vol 3 (5-6) ◽  
pp. 321-327 ◽  
Author(s):  
M. Gallenkemper ◽  
T. Wintgens ◽  
T. Melin

Endocrine disrupting compounds can affect the hormone system in organisms. A wide range of endocrine disrupters were found in sewage and effluents of municipal wastewater treatment plants. Toxicological evaluations indicate that conventional wastewater treatment plants are not able to remove these substances sufficiently before disposing effluent into the environment. Membrane technology, which is proving to be an effective barrier to these substances, is the subject of this research. Nanofiltration provides high quality permeates in water and wastewater treatment. Eleven different nanofiltration membranes were tested in the laboratory set-up. The observed retention for nonylphenol (NP) and bisphenol A (BPA) ranged between 70% and 100%. The contact angle is an indicator for the hydrophobicity of a membrane, whose influence on the permeability and retention of NP was evident. The retention of BPA was found to be inversely proportional to the membrane permeability.


The theory of the vibrations of the pianoforte string put forward by Kaufmann in a well-known paper has figured prominently in recent discussions on the acoustics of this instrument. It proceeds on lines radically different from those adopted by Helmholtz in his classical treatment of the subject. While recognising that the elasticity of the pianoforte hammer is not a negligible factor, Kaufmann set out to simplify the mathematical analysis by ignoring its effect altogether, and treating the hammer as a particle possessing only inertia without spring. The motion of the string following the impact of the hammer is found from the initial conditions and from the functional solutions of the equation of wave-propagation on the string. On this basis he gave a rigorous treatment of two cases: (1) a particle impinging on a stretched string of infinite length, and (2) a particle impinging on the centre of a finite string, neither of which cases is of much interest from an acoustical point of view. The case of practical importance treated by him is that in which a particle impinges on the string near one end. For this case, he gave only an approximate theory from which the duration of contact, the motion of the point struck, and the form of the vibration-curves for various points of the string could be found. There can be no doubt of the importance of Kaufmann’s work, and it naturally becomes necessary to extend and revise his theory in various directions. In several respects, the theory awaits fuller development, especially as regards the harmonic analysis of the modes of vibration set up by impact, and the detailed discussion of the influence of the elasticity of the hammer and of varying velocities of impact. Apart from these points, the question arises whether the approximate method used by Kaufmann is sufficiently accurate for practical purposes, and whether it may be regarded as applicable when, as in the pianoforte, the point struck is distant one-eighth or one-ninth of the length of the string from one end. Kaufmann’s treatment is practically based on the assumption that the part of the string between the end and the point struck remains straight as long as the hammer and string remain in contact. Primâ facie , it is clear that this assumption would introduce error when the part of the string under reference is an appreciable fraction of the whole. For the effect of the impact would obviously be to excite the vibrations of this portion of the string, which continue so long as the hammer is in contact, and would also influence the mode of vibration of the string as a whole when the hammer loses contact. A mathematical theory which is not subject to this error, and which is applicable for any position of the striking point, thus seems called for.


Sign in / Sign up

Export Citation Format

Share Document