Simulation of Fuel Storage Hazards Associated With Petroleum Refineries Tanks

Author(s):  
Mohammad Pourgol-Mohammad ◽  
Mohammad Pourghafari ◽  
Reza Alizadeh ◽  
Mojtaba Raheli Kaleibar ◽  
Morteza Soleimani

Predicting of hazards associated with the damages of fuel storage tanks in petroleum refineries is critical in maintaining safety of the facilities. This study assesses the hazard of the refinery gasoline tank damage by augmented mathematical and semi-experimental methods. This research evaluates complete content release of the reservoir tank scenario in a given time, as the worst case. Environment conditions are evaluated as affecting factors on the progression of the scenario. Comparison between the results of numerical simulations for pool fire as well as vapor cloud explosion with the results of simulation based on empirical-mathematical models indicates noticeable differences between the results in the vicinity of the boundary conditions; however, with increasing the distance from the center of the accident point, this difference decreases markedly.

PCI Journal ◽  
1985 ◽  
Vol 30 (4) ◽  
pp. 52-63 ◽  
Author(s):  
G. Craig Freas ◽  
Michael J. Shoemaker ◽  
Douglas Ervin
Keyword(s):  

Author(s):  
Marilia A. Ramos ◽  
Enrique L. Droguett ◽  
Marcelo R. Martins ◽  
Henrique P. Souza

In recent decades, natural gas has been gaining importance in world energy scene and established itself as an important source of energy. One of the biggest obstacles to increase the usage of natural gas is its transportation, mostly done in its liquid form, LNG – Liquefied Natural Gas, and storage. It involves the liquefaction of natural gas, transport by ship, its storage and subsequent regasification, in order to get natural gas in its original form and send it to the final destination through natural gas pipeline system. Nowadays, most terminals for receiving, storing and regasificating LNG, as well as sending-out natural gas are built onshore. These terminals, however, are normally built close to populated areas, where consuming centers can be found, creating safety risks to the population nearby. Apart from possible damages caused by its cryogenic temperatures, LNG spills are associated with hazards such as pool fires and ignition of drifting vapor clouds. Alternatively to onshore terminals, there are currently several offshore terminals projects in the world and some are already running. Today, Brazil owns two FSRU (Floating Storage and Regasification Unit) type offshore terminals, one in Guanabara Bay, Rio de Janeiro and the other in Pece´m, Ceara´, both contracted to PETROBRAS. The identification of the operation risks sources of LNG terminals onshore and offshore and its quantification through mathematical models can identify the most suitable terminal type for a particular location. In order to identify and compare the risks suggested by onshore and offshore LNG terminals, we have taken the example of the Suape Port and its Industrial Complex, located in Pernambuco, Brazil, which is a promising location for the installation of a LNG terminal. The present work has focused on calculating the distance to the LNG vapor cloud with the lower flammability limits (LFL), as well as thermal radiation emitted by pool fire, in case of a LNG spill from an onshore and from an offshore terminal. The calculation was made for both day and night periods, and for three types of events: operational accident, non-operational accident and worst case event, corresponding to a hole size of 0,75m, 1,5m e 5m, respectively. Even though the accidents that happen at an onshore terminal generate smaller vulnerability distances, according to the results it would not be desirable for the Suape Port, due to the location high density of industries and people working. Therefore, an offshore terminal would be more desirable, since it presents less risk to the surrounding populations, as well as for workers in this location.


2013 ◽  
Vol 8-9 ◽  
pp. 225-234
Author(s):  
Dalia Sabina Cimpean

The present study is focused on the mixed convection fluid flow through a porous medium, when a different amount of nanoparticles is added in the base fluid. The nanofluid saturates the porous matrix and different situations of the flow between two walls are presented and discussed. Alternatively mathematical models are presented and discussed. A solution of a system which contains the momentum, Darcy and energy equations, together with the boundary conditions involved, is given. The behavior of different nanofluids, such thatAu-water, Ag-waterandFe-wateris graphically illustrated and compared with the previous results.The research target is to observe the substantial increase of the thermophysical fluid properties, when the porous medium issaturated by a nanofluid instead of a classical Newtonian fluid.


2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Yanxia Fu ◽  
Yujiang Fang ◽  
Jiangping Yuan ◽  
Shouqi Yuan ◽  
Giovanni Pace ◽  
...  

The hydraulic performances of a 3-bladed inducer, designed at Alta, Pisa, Italy, are investigated both experimentally and numerically. The 3D numerical model developed in ANSYS CFX to simulate the flow through the inducer and different lengths of its inlet/outlet ducts is illustrated. The influence of the inlet/outlet boundary conditions, of the turbulence models, and of the location of inlet/outlet different pressure taps on the evaluation of the hydraulic performance of the inducer is analyzed. As expected, the predicted hydraulic performance of the inducer is significantly affected by the lengths of the inlet/outlet duct portions included in the computations, as well as by the turbulent flow model and the locations of the inlet/outlet pressure taps. It is slightly affected by the computational boundary conditions and better agreement with the test data obtained when adopting the k-ω turbulence model. From the point of the pressure tap locations, the pressure rise coefficient is much higher when the inlet/outlet static pressure taps were chosen in the same locations used in the experiments.


2021 ◽  
Author(s):  
Merhane Kamel ◽  
Jeffrey Daniel Eickhoff

Abstract Volatile Organic Compounds (VOC) which are emitted from tank farms of petroleum refineries are considered to cause harmful impacts to the environment and people. This paper presents the methodology of assessing potential targets for reduction of emissions, as well as proposed control mechanisms and their reductions, for hydrocarbon storage tanks at Jebel Al Dhanna Terminal. Some of the emissions reduction opportunities which are covered include aluminum dome retrofits, seal integrity improvement and guide pole treatments. The objective is to find significant reduction opportunities (from between 50% to 90% of current tank configurations) using passive technologies which prevent or inhibit emissions without the use of additional operational energy or active systems that would otherwise require significant maintenance or operational expense.


2019 ◽  
pp. 98-131
Author(s):  
Johannes Lenhard

This chapter shows that—and how—simulation models are epistemically opaque. Nevertheless, it is argued, simulation models can provide a means to control dynamics. Researchers can employ a series of iterated (experimental) runs of the model and can learn to orient themselves within the model—even if the dynamics of the simulation remain (at least partly) opaque. Admittedly, such an acquaintance with the model falls short of the high epistemic standards usually ascribed to mathematical models. This lower standard is still sufficient, however, when the aim is controlled intervention in technological contexts. On the other hand, opacity has to be accepted if the option for control is to remain in any way open. This chapter closes by discussing whether epistemic opacity restricts simulation-based science to a pragmatic—“weak”—version of scientific understanding.


Sign in / Sign up

Export Citation Format

Share Document