A Wireless Human Motion Monitoring System Based on Joint Angle Sensors and Smart Shoes

Author(s):  
Wenlong Zhang ◽  
Masayoshi Tomizuka ◽  
Nancy Byl

In this paper, a wireless human motion monitoring system based on joint angle sensors and smart shoes is introduced. An inertial measurement unit (IMU) is employed in a joint angle sensor to estimate the lower-extremity joint rotation in three dimensions. Four pressure sensors are embedded in a smart shoe to measure the distribution of ground contact forces (GCFs). Zig-bee and Bluetooth modules are combined with the joint angle sensors and smart shoes respectively to make the whole system wireless. It is shown that gait phase and step length can be calculated based on the raw sensor data for gait analysis. To provide visual feedback to the users, with the consent of Apple Inc., an user interface application is developed on an iPad. Experimental results are obtained from both a healthy subject and a stroke patient for comparison. Some discussions are made about the potential use of this system in a clinical environment.

Author(s):  
Wenlong Zhang ◽  
Masayoshi Tomizuka ◽  
Nancy Byl

In this paper, a wireless human motion monitoring system is presented for gait analysis and visual feedback in rehabilitation training. The system consists of several inertial sensors and a pair of smart shoes with pressure sensors. The inertial sensors can capture lower-extremity joint rotations in three dimensions and the smart shoes can measure the force distributions on the two feet during walking. Based on the raw measurement data, gait phases, step lengths, and center of pressure (CoP) are calculated to evaluate the abnormal walking behaviors. User interfaces are developed on both laptops and mobile devices to provide visual feedback to patients and physical therapists. The system has been tested on healthy subjects and then applied in a clinical study with 24 patients. It has been verified that the patients are able to understand the intuitive visual feedback from the system, and similar training performance has been achieved compared to the traditional gait training with physical therapists. The experimental results with one healthy subject, one stroke patient, and one Parkinson's disease patient are compared to demonstrate the performance of the system.


2021 ◽  
Author(s):  
Yuping Zeng ◽  
Wei Wu

As an important device in flexible and wearable microelectronic devices, flexible sensors have engaged a lot of attention due to their wide application in human motion monitoring, human-computer interaction and...


Nanoscale ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 4925-4932 ◽  
Author(s):  
Shun-Xin Li ◽  
Hong Xia ◽  
Yi-Shi Xu ◽  
Chao Lv ◽  
Gong Wang ◽  
...  

Gold nanoparticles were assembled into highly aligned micro/nanowires for flexible pressure sensors.


2018 ◽  
Vol 6 (48) ◽  
pp. 13120-13127 ◽  
Author(s):  
Ziqiang Zhou ◽  
Ying Li ◽  
Jiang Cheng ◽  
Shanyong Chen ◽  
Rong Hu ◽  
...  

Supersensitive all-fabric pressure sensors with a bottom interdigitated textile electrode screen-printed using silver paste and a top bridge of AgNW-coated cotton fabric are successfully fabricated for human motion monitoring and human–machine interaction.


2004 ◽  
Vol 01 (03) ◽  
pp. 517-532 ◽  
Author(s):  
JAN MARTIN ◽  
SEBASTIAN BECK ◽  
ARNE LEHMANN ◽  
RALF MIKUT ◽  
CHRISTIAN PYLATIUK ◽  
...  

The successful control of a robot hand with multiple degrees of freedom not only requires sensors to determine the state of the hand but also a thorough understanding of the actuator system and its properties. This article presents a set of sensors and analyzes the actuator properties of an anthropomorphic robot hand driven by flexible fluidic actuators. These flexible and compact actuators are integrated directly into the finger joints, they can be driven either pneumatically or hydraulically. The sensors for the measurement of joint angles, contact forces, and fluid pressure are described; the designs utilize mostly commodity components. Hall sensors and customized half-ring rare-earth magnets are used to integrate the joint angle sensors directly into the actuated joints. A force sensor setup allowing soft finger surfaces is evaluated. Fluid pressure sensors are needed for the model-based computation of joint torques and to limit the actuator pressure. Static and dynamic actuator characteristics are determined in a theoretical process analysis, and suitable parameters are identified in several experiments. The resulting actuator model incorporates the viscoelastic material behavior and describes the relations of joint angle, actuator pressure, and actuator torque. It is used in simulations and for the design of a joint position controller.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2246
Author(s):  
Scott Pardoel ◽  
Gaurav Shalin ◽  
Julie Nantel ◽  
Edward D. Lemaire ◽  
Jonathan Kofman

Freezing of gait (FOG) is a sudden and highly disruptive gait dysfunction that appears in mid to late-stage Parkinson’s disease (PD) and can lead to falling and injury. A system that predicts freezing before it occurs or detects freezing immediately after onset would generate an opportunity for FOG prevention or mitigation and thus enhance safe mobility and quality of life. This research used accelerometer, gyroscope, and plantar pressure sensors to extract 861 features from walking data collected from 11 people with FOG. Minimum-redundancy maximum-relevance and Relief-F feature selection were performed prior to training boosted ensembles of decision trees. The binary classification models identified Total-FOG or No FOG states, wherein the Total-FOG class included data windows from 2 s before the FOG onset until the end of the FOG episode. Three feature sets were compared: plantar pressure, inertial measurement unit (IMU), and both plantar pressure and IMU features. The plantar-pressure-only model had the greatest sensitivity and the IMU-only model had the greatest specificity. The best overall model used the combination of plantar pressure and IMU features, achieving 76.4% sensitivity and 86.2% specificity. Next, the Total-FOG class components were evaluated individually (i.e., Pre-FOG windows, Freeze windows, transition windows between Pre-FOG and Freeze). The best model detected windows that contained both Pre-FOG and FOG data with 85.2% sensitivity, which is equivalent to detecting FOG less than 1 s after the freeze began. Windows of FOG data were detected with 93.4% sensitivity. The IMU and plantar pressure feature-based model slightly outperformed models that used data from a single sensor type. The model achieved early detection by identifying the transition from Pre-FOG to FOG while maintaining excellent FOG detection performance (93.4% sensitivity). Therefore, if used as part of an intelligent, real-time FOG identification and cueing system, even if the Pre-FOG state were missed, the model would perform well as a freeze detection and cueing system that could improve the mobility and independence of people with PD during their daily activities.


Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 111
Author(s):  
Pengjia Tu ◽  
Junhuai Li ◽  
Huaijun Wang ◽  
Ting Cao ◽  
Kan Wang

Human activity recognition (HAR) has vital applications in human–computer interaction, somatosensory games, and motion monitoring, etc. On the basis of the human motion accelerate sensor data, through a nonlinear analysis of the human motion time series, a novel method for HAR that is based on non-linear chaotic features is proposed in this paper. First, the C-C method and G-P algorithm are used to, respectively, compute the optimal delay time and embedding dimension. Additionally, a Reconstructed Phase Space (RPS) is formed while using time-delay embedding for the human accelerometer motion sensor data. Subsequently, a two-dimensional chaotic feature matrix is constructed, where the chaotic feature is composed of the correlation dimension and largest Lyapunov exponent (LLE) of attractor trajectory in the RPS. Next, the classification algorithms are used in order to classify and recognize the two different activity classes, i.e., basic and transitional activities. The experimental results show that the chaotic feature has a higher accuracy than traditional time and frequency domain features.


2021 ◽  
Vol 45 (1) ◽  
pp. 208-216
Author(s):  
Zhonghua Zhao ◽  
Xiang Yuan ◽  
Yicheng Huang ◽  
Jikui Wang

Conductive hydrogels are promising flexible conductors for human motion monitoring.


Sign in / Sign up

Export Citation Format

Share Document