Numerical Simulation of Mark Formation/Erasure in Phase Change Recording

2005 ◽  
Author(s):  
Evan Small ◽  
John Reifenberg ◽  
Yizhang Yang ◽  
Sadegh M. Sadeghipour ◽  
Mehdi Asheghi
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Temperature Distribution ◽  
Finite Elements ◽  
Phase Change ◽  
Finite Elements Method ◽  
Heat Diffusion ◽  
Recording Media ◽  
Heat Diffusion Equation ◽  
Heat Transfer Simulation

Design/optimization of the phase change recording media to create proper marks, in size, shape, and quality, needs a robust modeling tool to predict temperature distribution in the constituting layers and model the phase formation during writing/erasure of the information bits. This requires a modeling of the heat transfer (thermal performance) and the crystallization processes. The thermal modeling, which is based on the solution of the heat diffusion equation for finding temperature distribution in the multilayer media, has been done before, using the finite difference techniques. These techniques have limited potentials for modeling real phase change recording media that have a rather more complex geometry. The finite elements method has, on the other hand, the required flexibility for such applications. In this work, we are reporting on development of a numerical simulation tool that uses the finite elements method for heat transfer simulation. ANSYS is used as the source code for the heat transfer simulation, in this application, with the crystallization model then being built into this media. This code has been used to simulate mark formation during writing on grooved plain and planer patterned media. Patterning the phase change material layer looks very promising in controlling the mark size and the mark edge irregularity which lead to timing jitter.

Mathematical Model for Heat Transfer Simulation of Rotary Alumina Kiln

2013 ◽  
Vol 423-426 ◽  
pp. 881-884
Author(s):  
Xiao Yan Yang ◽  
You Gang Xiao ◽  
Xian Ming Lei
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Temperature Distribution ◽  
Phase Change ◽  
Heat Loss ◽  
Chemical Reactions ◽  
Outer Shell ◽  
Test Results ◽  
Distribution Rule ◽  
Heat Transfer Simulation

According to kiln structure and material movement features, considering convective, radioactivity, conductivity and various phase change and chemical reactions, a series of comprehensive models are built for quantifying the thermal fluxes from the gas to the material bed and the heat loss from outer shell to the atmosphere in the rotary alumina kiln. The results show that the temperatures of outer shell accord with test results; the temperature distribution rule of gas is the same with that of materials, but the gas temperatures are higher; it is feasible to use the model to improve alumina kiln performance.

Numerical Simulation of Induction Heating of Aluminum Alloy Billets

2008 ◽  
Vol 141-143 ◽  
pp. 133-138 ◽  
Author(s):  
N. Barman ◽  
J. Mukherjee ◽  
P. Dutta
Keyword(s):  
Numerical Simulation ◽  
Aluminum Alloy ◽  
Temperature Distribution ◽  
Heat Source ◽  
Induction Heating ◽  
Current Density ◽  
Source Term ◽  
Heat Diffusion ◽  
Heating Process ◽  
Heat Diffusion Equation

In this work, a numerical model for induction heating is proposed. The heating process considers only interaction of electromagnetic effects and heat transfer, and is represented by an unsteady heat diffusion equation. The numerical simulation of the process is performed using a finite volume method in which the induction heating is represented by a volumetric heat source term. The heat source term is evaluated analytically using principles based on Faraday’s and Biot- Savart laws. The technique is applied to the case of induction heating of a cylindrical A356 aluminum alloy billet. The model predicts magnetic flux density and temperature distribution during the heating process. The effects of process parameters, such as frequency and current density, on the temperature distribution are also studied. The results show that nearly uniform distribution of temperature can be achieved when the billet is heated slowly with low frequency and low supply current density.

scholarly journals Transient Analysis of Heat Transfer Across the Residential Building Roof with Pcm and Wood Wool- A Case Study by Numerical Simulation Approach

2013 ◽  
Vol 59 (4) ◽  
pp. 483-497 ◽  
Author(s):  
D. Prakash ◽  
P. Ravikumar
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Phase Change ◽  
Phase Change Material ◽  
Transient Analysis ◽  
Residential Building ◽  
Building Roof ◽  
Type 3 ◽  
Change Material

Abstract In this paper, transient analysis on heat transfer across the residential building roof having various materials like wood wool, phase change material and weathering tile is performed by numerical simulation technique. 2-dimensional roof model is created, checked for grid independency and validated with the experimental results. Three different roof structures are included in this study namely roof with (i). Concrete and weathering tile, (ii). Concrete, phase change material and weathering tile and (iii). Concrete, phase change material, wood wool and weathering tile. Roof type 3 restricts 13% of heat entering the room in comparison with roof having only concrete and weathering tile. Also the effect of various roof layers’ thickness in the roof type 3 is investigated and identified that the wood wool plays the major role in arresting the entry of heat in to the room. The average reduction of heat is about 10 % for an increase of a unit thickness of wood wool layer.

Experimental and Numerical Evaluation of Small-Scale Cryosurgery Using Ultrafine Cryoprobe

2013 ◽  
Vol 4 (4) ◽  
Author(s):  
Junnosuke Okajima ◽  
Atsuki Komiya ◽  
Shigenao Maruyama
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Transfer Coefficient ◽  
Temperature Distribution ◽  
Surface Temperature ◽  
Numerical Evaluation ◽  
Small Scale ◽  
Outer Diameter ◽  
Cooling Performance ◽  
The Heat Transfer Coefficient

The objective of this work is to experimentally and numerically evaluate small-scale cryosurgery using an ultrafine cryoprobe. The outer diameter (OD) of the cryoprobe was 550 μm. The cooling performance of the cryoprobe was tested with a freezing experiment using hydrogel at 37 °C. As a result of 1 min of cooling, the surface temperature of the cryoprobe reached −35 °C and the radius of the frozen region was 2 mm. To evaluate the temperature distribution, a numerical simulation was conducted. The temperature distribution in the frozen region and the heat transfer coefficient was discussed.

Numerical simulation of vapor bubble growth on a vertical superheated wall using lattice Boltzmann method

2015 ◽  
Vol 25 (5) ◽  
pp. 1214-1230 ◽  
Author(s):  
Tao Sun ◽  
Weizhong Li ◽  
Bo Dong
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Phase Change ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Nucleate Boiling ◽  
Numerical Results ◽  
Heat Transfer Mechanism ◽  
Content Type ◽  
Boltzmann Method

Purpose – The purpose of this paper is to test the feasibility of lattice Boltzmann method (LBM) for numerical simulation of nucleate boiling and transition boiling. In addition, the processes of nucleate and transition boiling on vertical wall are simulated. The heat transfer mechanism is discussed based on the evolution of temperature field. Design/methodology/approach – In this paper, nucleate boiling and transition boiling are numerically investigated by LBM. A lattice Boltzmann (LB) multiphase model combining with a LB thermal model is used to predict the phase-change process. Findings – Numerical results are in good agreement with existing experimental results. Numerical results confirm the feasibility of the hybrid LBM for direct simulations of nucleate and transition boiling. The data exhibit correct parametric dependencies of bubble departure diameter compared with experimental correlation and relevant references. Research limitations/implications – All the simulations are performed in two-dimensions in this paper. In the future work, the boiling process will be simulated in three-dimensional. Practical implications – This study demonstrated a potential model that can be applied to the investigation of phase change heat transfer, which is one of the effective techniques for enhance the heat transfer in engineering. The numerical results can be considered as a basic work or a reference for generalizing LB method in the practical application about nucleate boiling and transition boiling. Originality/value – The hybrid LBM is first used for simulation of nucleate and transition boiling on vertical surface. Heat transfer mechanism during boiling is discussed based on the numerical results.

A Study Regarding the Unsteady Heat Transfer and Phase Change

2014 ◽  
Vol 659 ◽  
pp. 353-358
Author(s):  
Gelu Coman ◽  
Cristian Iosifescu ◽  
Valeriu Damian
Keyword(s):  
Heat Transfer ◽  
Numerical Modeling ◽  
Temperature Field ◽  
Temperature Distribution ◽  
Finite Elements ◽  
Experimental Research ◽  
Theoretical Study ◽  
Ice Formation ◽  
Unsteady Heat Transfer ◽  
Cooling Pipes

The paper presents the experimental and theoretical study for temperature distribution around the cooling pipes of an ice rink pad. The heat transfer in the skating rink track is nonstationary and phase changing. In case of skating rinks equipped with pipe registers, the temperature field during the ice formation process can’t be modeled by analytical methods. The experimental research was targeted on finding the temperatures in several points of the pad and also details on ice shape and quality around the pipes. The temperatures measured on the skating ring surface using thermocouples is impossible due to the larger diameter of the thermocouple bulb compared with the air-water surfaces thickness. For this reason we used to measure the temperature by thermography method, thus reducing the errors The experimental results were compared against the numerical modeling using finite elements.

scholarly journals Computational and Mathematical Model with Phase Change and Metal Addition Applied to GMAW

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Alfredo dos Santos Maia Neto ◽  
Marcelo Gonçalves de Souza ◽  
Edson Alves Figueira Júnior ◽  
Valério Luiz Borges ◽  
Solidônio Rodrigues de Carvalho
Keyword(s):  
Mathematical Model ◽  
Phase Change ◽  
Thermal Model ◽  
Complex Geometry ◽  
Golden Section ◽  
Simulated Data ◽  
Heat Diffusion ◽  
Data Logger ◽  
Heat Diffusion Equation ◽  
Metal Addition

This work presents a 3D computational/mathematical model to solve the heat diffusion equation with phase change, considering metal addition, complex geometry, and thermal properties varying with temperature. The finite volume method was used and the computational code was implemented in C++, using a Borland compiler. Experimental tests considering workpieces of stainless steel AISI 304 were carried out for validation of the thermal model. Inverse techniques based on Golden Section method were used to estimate the heat transfer rate to the workpieces. Experimental temperatures were measured using thermocouples type J—in a total of 07 (seven)—all connected to the welded workpiece and the Agilent 34970A data logger. The workpieces were chamfered in a 45° V-groove in which liquid metal was added on only one weld pass. An innovation presented in this work when compared to other works in scientific literature was the geometry of the weld pool. The good relation between experimental and simulated data confirmed the quality and robustness of the thermal model proposed in this work.

Numerical Simulation Model of Electrothermal De-Icing Process on Composite Substrate

2020 ◽  
Author(s):  
Xiaofeng Guo ◽  
Zhiqiang Guo ◽  
Qian Yang ◽  
Wei Dong
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Thermal Properties ◽  
Temperature Distribution ◽  
Simulation Model ◽  
Melting Process ◽  
Ice Melting ◽  
Melted Zone ◽  
Composite Substrate ◽  
Cfrp Composite

Abstract A numerical simulation model of electrothermal de-icing process on carbon fiber reinforced polymer (CFRP) composite is conducted to study the effect of thermal properties of the substrate on the ice melting process. A novel melting model which is based on the enthalpy-porosity method is applied to study the transient ice melting process and heat transfer of the de-icing sys-tem. Multi-layered electrothermal de-icing systems including composites with different fiber orientation are used to analyze the effects of orthotropic heat conductivity of the CFRP composite on the ice melting process and heat transfer. Movement of the ice-water interface, the melted zone thickness and the melted zone area on CFRP composite are investigated on the three-dimensional electrothermal de-icing unit. The effects of thermal properties of substrate on the temperature distribution of the ice-airfoil interface are analyzed. The computational results show that the thermal properties of substrates affect the temperature on the ice-airfoil interface, the temperature distribution in the substrate, ice melting area, ice melting rate and ice melting volume significantly. The time that ice starts to melt on the CFRP composite substrate is earlier than that on the metal substrate. However, it takes more time for the ice to melt completely on the ice-CFRP interface than that on the ice-metal inter-face. The orthotropic heat conductivity of CFRP composite results in strong directivity of the melting area on the ice-CFRP in-terface. A ratio parameter is defined to represent the matching degree of substrate materials and geometry model of de-icing system. The simulation model can be applied to study electrothermal de-icing system of nacelle inlet and airfoil made of composite. The results in present work is also helpful to predict the change of temperature during de-icing process and provide guidelines for the optimizing the electrothermal de-icing system to reduce power consumption according to the fiber structure of composite.

scholarly journals Prediction of Convective Heat Transfer Coefficient and Temperature Distribution of Air-Conditioned Spaces Using Numerical Simulation

2016 ◽  
Vol 10 (8) ◽  
pp. 12
Author(s):  
Hussein J. Akeiber ◽  
Mazlan A. Wahid ◽  
Hasanen M. Hussen ◽  
Abdulrahman Th. Mohammad ◽  
Bashar Mudhaffar Abdullah ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Transfer Coefficient ◽  
Temperature Distribution ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Solution Technique ◽  
Geometrical Parameters

Accurate and efficient modeling of convective heat transfer coefficient (CHTC) by considering the detailed room geometry and heat flux density in building is demanding for economy, environmental amiability, and user satisfaction. We report the three-dimensional finite-volume numerical simulation of internal room flow field characteristics with heated walls. Two different room geometries are chosen to determine the CHTC and temperature distribution. The conservation equations (elliptic partial differential) for the incompressible fluid flows are numerically solved using iterative method with no-slip boundary conditions to compute velocity components, pressure, temperature, turbulent kinetic energy, and dissipation rate. A line-by-line solution technique combined with a tri-diagonal matrix algorithm (TDMA) is used. The temperature field is simulated for various combinations of air-change per hour and geometrical parameters. The values of HTCs are found to enhance with increasing wall temperatures.

scholarly journals Analysis of the Thermal Characteristics of a Composite Ceramic Product Filled with Phase Change Material

Buildings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 217 ◽  
Author(s):  
Joanna Krasoń ◽  
Przemysław Miąsik ◽  
Lech Lichołai ◽  
Bernardeta Dębska ◽  
Aleksander Starakiewicz
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Transfer Coefficient ◽  
Phase Change ◽  
Transfer Coefficient ◽  
Phase Change Material ◽  
Thermal Characteristics ◽  
Ceramic Product ◽  
Change Material ◽  
The Heat Transfer Coefficient

The article presents a comparative analysis carried out using three methods, determining the heat transfer coefficient U for a ceramic product modified with a phase change material (PCM). The purpose of the article is to determine the convergence of the resulting thermal characteristics, obtained using the experimental method, numerical simulation, and standard calculation method according to the requirements of PN-EN ISO 6946. The heat transfer coefficient is one of the basic parameters characterizing the thermal insulation of a building partition. Most often, for the thermal characteristics of the partition, we obtain from the manufacturer the value of the thermal conductivity coefficient λ for individual homogeneous materials or the heat transfer coefficient U for the finished (prefabricated) partition. In the case of a designed composite element modified with a phase change material or other material, it is not possible to obtain direct information on the above parameter. In such a case, one of the methods presented in this article should be used to determine the U factor. The U factor in all analyses was determined in stationary conditions. Research has shown a significant convergence of the resulting value of the heat transfer coefficient obtained by the assumed methods. Thanks to obtaining similar values, it is possible to continue tests of thermal characteristics of partitions by means of numerical simulation, limiting the number of experimental tests (due to the longer test time required) in assumed different partition configurations, in stationary and dynamic conditions.

Sign in / Sign up

Export Citation Format

Share Document