Sliding Mode Controller and Filter Applied to a Model oft an Electrohydraulic Actuator System

Author(s):  
Shu Wang ◽  
Richard Burton ◽  
Saeid Habibi

A new robust state and parameter estimation strategy called the Variable Structure Filter (VSF) has recently been proposed and used for state and parameter estimation. A very common problem of linear stochastic systems is to design a combined robust control and estimation strategy, given system and noise uncertainties. Variable Structure Control (VSC) and its special form of Sliding Mode Control (SMC) show superb robustness. This paper proposes a new strategy involving the Sliding Mode Control and the Variable Structure Filter. Both the estimator and controller are based on the concepts of Variable Structure Systems (VSS). In the presence of bounded parametric uncertainties and noise, a robust stability is guaranteed. Further more, the combined strategy can be used to achieve high regulation rates or short settling times. The object of this paper is to introduce this combined VSF and SMC strategy and to demonstrate its application to a third order model of a high precision hydrostatic system, referred to as the Electrohydraulic Actuator System (EHA).

Author(s):  
Shu Wang ◽  
Richard Burton ◽  
Saeid Habibi

A common problem pertaining to linear or nonlinear systems is the design of a combined robust control and estimation strategy that can effectively deal with noise and uncertainties. The variable structure control (VSC) and its special form of sliding mode control (SMC) demonstrate robustness with regard to uncertainties, although their performance can be severely degraded by noise. As such they can benefit from using state estimates obtained from filters. In this regard, this paper considers the use of a recently proposed robust state and parameter estimation strategy referred to as the variable structure filter (VSF) in conjunction with SMC. The contribution of this paper is a new strategy that combines sliding mode control with the variable structure filter. In the presence of bounded parametric uncertainties and noise, this combined method demonstrates robust stability both in terms of control and state estimation. Furthermore, the combined strategy can be used to achieve high regulation rates or short settling time. The combined VSF and SMC strategy is demonstrated by its application to a high precision hydrostatic system, referred to as the electrohydraulic actuator system.


Author(s):  
I. Boiko ◽  
H. Hussein ◽  
A. Al Durra

Perspectives of using sliding mode control in e-learning are discussed. The concepts of variable structure systems and sliding mode control are given. Analysis of convergence based on the second Lyapunov's method is presented. The analysis presented is based on the dynamic models of learning available in the literature. The suitability of the use of sliding mode to adaptation of level of challenge of the tasks in e-learning is demonstrated. It is shown that with frequent enough evaluation of tasks, optimal level of task challenge can be ensured.


1995 ◽  
Vol 05 (03) ◽  
pp. 337-354 ◽  
Author(s):  
G. SPIAZZI ◽  
P. MATTAVELLI ◽  
L. ROSSETTO ◽  
L. MALESANI

Switch-mode power supplies represent a particular class of variable structure systems (VSS). Thus, they can take advantage of non-linear control techniques developed for this class of systems. In this paper the so called sliding mode control is reviewed and its application to switch-mode power supplies is discussed. Sliding mode control extends the properties of hysteresis control to multi-variable environments, resulting in stability even for large supply and load variations, good dynamic response and simple implementation. Application to dc–dc converters, as well as rectifiers and inverters, is analyzed and provisions to overcome the inherent drawbacks of sliding mode control, i.e. variable switching frequency and possible steady-state errors, are described. Experimental results are also reported, which allow a comparison between the sliding mode approach and other standard control techniques, e.g. current-mode control, showing its effectiveness.


Author(s):  
Meriem Benmeziane ◽  
S. Zebirate ◽  
A. Chaker ◽  
Z. Boudjema

<span lang="EN-US">This paper present a hybrid nonlinear control based on fuzzy sliding mode to control wind energy conversion system using a doubly fed induction generator (DFIG). Consiting of coupling fuzzy logic control and sliding mode control this technique is introduced to avoid the major disadvantage of variable structure systems, namely the chattering phenomenon. Effectiveness and feasibility of the proposed control strategy are verified by simulation results in Matlab Simulink.</span>


Sign in / Sign up

Export Citation Format

Share Document