Experimental study on axial bending force of elevator wire rope

2021 ◽  
Author(s):  
Hui Chen ◽  
Aihua Jiang
Keyword(s):  
Experimental Study ◽  
Wire Rope ◽  
Bending Force

Arrangement Characteristics and Wear Distribution of Wire Rope in Parallel Grooved Multi-Layer Winding

2013 ◽  
Vol 423-426 ◽  
pp. 842-845 ◽  
Author(s):  
Zhi Hui Hu ◽  
Yong Hu ◽  
Ji Quan Hu
Keyword(s):  
Experimental Study ◽  
Wire Rope ◽  
Wire Ropes ◽  
The Wire ◽  
Wear Damage

Based on the analysis of multi-layer winding arrangement characteristic of the wire rope in Lebus drum, the experimental study is carried on wear distribution of the wire rope in parallel grooved multi-layer winding. The result shows that, the wire rope is arranged regularly in each drum area in parallel grooved multi-layer winding; the wear of wire ropes in crossover zone is more serious than that of the parallel zone; in the same-layer wire rope winding in crossover zone, the wear damage during the wire rope winding in crossover zone at the end of each-layer drum is the most serious.

scholarly journals Analysis of Eddy Current Response to Lay Length of Wire Rope with Pancake Coil and Experimental Study

2020 ◽  
Vol 56 (16) ◽  
pp. 13
Author(s):  
LI Tengyu ◽  
KOU Ziming ◽  
WU Juan ◽  
JIAO Shaoni ◽  
MAO Qinghua
Keyword(s):  
Experimental Study ◽  
Eddy Current ◽  
Wire Rope ◽  
Current Response ◽  
Pancake Coil ◽  
Eddy Current Response

scholarly journals Experimental study on mechanical properties of new biaxial compression wire rope isolator

2021 ◽  
Vol 51 (12) ◽  
pp. 124612
Author(s):  
ChunHui ZHANG ◽  
KaiTian LU ◽  
Lei ZHANG ◽  
Ming YAN ◽  
Yi ZHANG
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Wire Rope ◽  
Biaxial Compression ◽  
Wire Rope Isolator

scholarly journals Experimental study on vertical static stiffnesses of polycal wire rope isolators

2017 ◽  
Vol 217 ◽  
pp. 012032
Author(s):  
P.S. Balaji ◽  
Leblouba Moussa ◽  
Noman Khandoker ◽  
Ting Yuk Shyh ◽  
M.E. Rahman ◽  
...  
Keyword(s):  
Experimental Study ◽  
Wire Rope

Experimental study of tool bending force and feed rate in ECDM milling

2016 ◽  
Vol 91 (5-8) ◽  
pp. 1677-1687 ◽  
Author(s):  
Mansour Hajian ◽  
Mohammad Reza Razfar ◽  
Ardeshir Hemasian Etefagh
Keyword(s):  
Experimental Study ◽  
Feed Rate ◽  
Bending Force

Parametric experimental study of wire rope spring tuned mass dampers

2003 ◽  
Vol 91 (12-15) ◽  
pp. 1363-1385 ◽  
Author(s):  
Rafik R. Gerges ◽  
Barry J. Vickery
Keyword(s):  
Experimental Study ◽  
Wire Rope ◽  
Tuned Mass Dampers

Experimental Study on Effect of Pulley Diameter and Lubricant Grease on Multi-Layer Winding Wire Rope’s Fatigue Endurance

2011 ◽  
Vol 301-303 ◽  
pp. 1618-1623
Author(s):  
Zhi Hui Hu ◽  
Ji Quan Hu ◽  
Yong Hu
Keyword(s):  
Experimental Study ◽  
Reference Value ◽  
Spatial Location ◽  
Wire Rope ◽  
Diameter Ratio ◽  
Test Method ◽  
Failure Behavior ◽  
Reliability Design ◽  
Winding Wire ◽  
Fatigue Endurance

Comparison test method is used to study the effect of pulley diameter and lubricant grease on multi-layer winding wire rope’s fatigue endurance. The investigation indicates that the fatigue failure behavior is closely related to spatial location where the wire rope is in drum; the occurrence and development of broken wires follows regularly. The fatigue endurance of multi-layer winding wire rope is little influenced by lubricant grease, which is greatly affected by the diameter ratio of pulley to rope in multi-layer winding. The results have important reference value for the reliability design of multi-layer winding wire rope.

Experimental Study on Mechanical Characteristics of the End Plates of Lebus Drum

2012 ◽  
Vol 619 ◽  
pp. 347-350
Author(s):  
Yong Hu ◽  
Jing Tang ◽  
Ji Quan Hu
Keyword(s):  
Experimental Study ◽  
Calculation Method ◽  
Radial Direction ◽  
Mechanical Characteristics ◽  
Experimental Approach ◽  
Equivalent Stress ◽  
Wire Rope ◽  
End Plate ◽  
Conventional Calculation ◽  
The Wire

The mechanical characteristics of the end plates of Lebus drum were investigated by an experimental approach. Strain-electricity method was used to test the stress of the end plates of the drum. Experimental results show that the equivalent stress exerted on the end plate is 3 time higher than the stress obtained by the conventional calculation method. The stress exerted on the end plate of one side of Lebus drum grows one time as the wire rope adds two layers according to the winding process and the increment of the stress becomes larger and larger with the wire rope layer number increasing. When the wire rope rise from the 10th layer to 11th layer, the increment of the stress in radial direction on the end plate of the entry side reaches up to 54.9 [Mpa].

scholarly journals Influence of corrosion on the mechanical behavior of strand of a non-rotating wire rope: experimental study

2019 ◽  
Vol 18 ◽  
pp. 731-741
Author(s):  
Abdeljalil Jikal ◽  
Fatima Majid ◽  
Hassan Chaffou ◽  
Mohamed El Ghorba
Keyword(s):  
Experimental Study ◽  
Mechanical Behavior ◽  
Wire Rope

scholarly journals Lateral stiffness of polycal wire rope isolators – An experimental study

2019 ◽  
Vol 495 ◽  
pp. 012087
Author(s):  
Y S Ting ◽  
Noman Khandoker ◽  
M.E. Rahman ◽  
Sumaiya Islam ◽  
Lau Hieng Ho ◽  
...  
Keyword(s):  
Experimental Study ◽  
Wire Rope ◽  
Lateral Stiffness
Sign in / Sign up

Export Citation Format

Share Document