A 6.4-GS/s 10-b Time-Interleaved SAR ADC with Time-Skew Immune Sampling Network in 28-nm CMOS

This paper presents a 6.4-GS/s 16-way 10-bit time-interleaved (TI) SAR ADC for wideband wireless applications. A two-stage master–slave hierarchical sampling network, which is immune to the time skew of multi-phase clocks, is introduced to avoid the time-skew calibration for design simplicity and hardware efficiency. To perform low distortion and fast sampling at acceptable power consumption, a linearity- and energy efficiency-improved track-and-hold (T&H) buffer with current-feedback compensation scheme is proposed. Accompanied by its low-output-impedance feature, the buffer obtains adequate bandwidth which can cover the entire ADC Nyquist sampling range. Moreover, the split capacitor DAC combined with a novel nonbinary algorithm is adopted in single-channel ADC, enabling a shorter DAC settling time as well as less switching energy. Capacitor mismatch effect with related design trade-off is discussed and behavior models are built to evaluate the effect of capacitor mismatch on ENOB. An asynchronous self-triggered SAR logic is designed and optimized to minimize the delay on logic paths to match up the acceleration on DAC and comparator. With these proposed techniques, the 10-b sub-ADC achieves a 400-MHz conversion rate with only 3.5-mW power consumption. The circuit is designed and simulated in TSMC 28 HPC process and the results show that the overall ADC achieves 54.6-dB SNDR and 58.1-dB SFDR at Nyquist input while consuming 127-mW power from 1-V/1.5-V supply and achieving a Walden FoM of 45[Formula: see text]fJ/conv-step.