A 3D Autonomous System with Infinitely Many Chaotic Attractors

2019 ◽  
Vol 29 (12) ◽  
pp. 1950166 ◽  
Author(s):  
Ting Yang ◽  
Qigui Yang
Keyword(s):  
Dynamical System ◽  
Differential Equations ◽  
Autonomous System ◽  
Three Dimensional ◽  
Chaotic Attractors ◽  
Double Zero ◽  
Finite Dimensional ◽  
Periodic Attractors ◽  
The Stability ◽  
Autonomous Dynamical System

Intuitively, a finite-dimensional autonomous system of ordinary differential equations can only generate finitely many chaotic attractors. Amazingly, however, this paper finds a three-dimensional autonomous dynamical system that can generate infinitely many chaotic attractors. Specifically, this system can generate infinitely many coexisting chaotic attractors and infinitely many coexisting periodic attractors in the following three cases: (i) no equilibria, (ii) only infinitely many nonhyperbolic double-zero equilibria, and (iii) both infinitely many hyperbolic saddles and nonhyperbolic pure-imaginary equilibria. By analyzing the stability of double-zero and pure-imaginary equilibria, it is shown that the classic Shil’nikov criteria fail in verifying the existence of chaos in the above three cases.

scholarly journals Vibration Control of Nonlinear Three‐dimensional Marine Riser Model with Output Constraints

2021 ◽  
Author(s):  
Min Wan ◽  
Yanxia Yin ◽  
Jun Liu ◽  
Xiaoqiang Guo
Keyword(s):  
Differential Equations ◽  
Initial Conditions ◽  
External Disturbance ◽  
Three Dimensional ◽  
Distributed Parameter ◽  
Marine Riser ◽  
Control Laws ◽  
Finite Dimensional ◽  
Output Constraints ◽  
The Stability

Abstract A typical three-dimensional flexible marine riser which is described by a distributed parameter system with several partial differential equations and ordinary differential equations is considered in this paper, we are aiming at limiting the top displacement of riser within restricted ranges. Appropriate boundary controls by integrating finite-dimensional backstepping technique with barrier Lyapunov functions are put forwarded to suppress the vibration of flexible riser under the external disturbance. The stability of the closed-loop system with the designed boundary control laws is proved by Lyapunov’s synthetic method without any discretization or simplification of the dynamic in the time and space when the initial conditions are satisfied. Furthermore, in order to illustrate the effectiveness of proposed controls laws, numerical simulation studies are carried.

SUBSTANTIATION FOR SIMPLIFICATION OF CALCULATION MODELS FOR ASSESSMENT OF THE STABILITY OF ROOF ROCKS

2021 ◽  
pp. 25-36
Author(s):  
Oleksandr Ahafonov ◽  
◽  
Daria Chepiga ◽  
Anton Polozhiy ◽  
Iryna Bessarab ◽  
...  
Keyword(s):  
Differential Equations ◽  
Coal Seam ◽  
Cross Section ◽  
Three Dimensional ◽  
Theory Of Elasticity ◽  
Unit Width ◽  
Distributed Load ◽  
The Stability ◽  
Roof Rocks ◽  
Calculation Models

Purpose. Substantiation of expediency and admissibility of use of the simplified calculation models of a coal seam roof for an estimation of its stability under the action of external loadings. Methods. To achieve this purpose, the studies have been performed using the basic principles of the theory of elasticity and bending of plates, in which the coal seam roof is represented as a model of a rectangular plate or a beam with a symmetrical cross-section with different support conditions. Results. To substantiate and select methods for studying the bending deformations of the roof in the coal massif containing the maingates, the three-dimensional base plate model and the beam model are compared, taking into account the kinematic boundary conditions and the influence of external distributed load. Using the theory of plate bending, the equations for determining the deflections of the coal seam roof in three-dimensional basic models under certain assumptions have a large dimension. After the conditional division of the plate into beams of unit width and symmetrical section, when describing the normal deflections of the middle surface of the studied models, the transition from the partial derivative equation to the usual differential equations is carried out. In this case, the studies of bending deformations of roof rocks are reduced to solving a flat problem in the cross-section of the beam. A comparison of solutions obtained by the methods of the three-dimensional theory of elasticity and strength of materials was performed. For a beam with a symmetrical section, the deflection lies in a plane whose angle of inclination coincides with the direction of the applied load. The calculations did not take into account the difference between the intensity of the surface load applied to the beam. Differences in determining the magnitude of the deflections of the roof in the model of the plate concerning the model of the beam reach 5%, which is acceptable for mining problems. Scientific novelty. To study the bending deformations and determine the magnitude of the roof deflection in models under external uniform distributed load, placed within the simulated plate, a strip of unit width was selected, which has a symmetrical cross-section and is a characteristic component of the plate structure and it is considered as a separate load-bearing element with supports, the cross-sections of this element is remained flat when bending. The deflection of such a linear element is described by the differential equations of the bent axis of the beam without taking into account the integral stiffness of the model, and the vector of its complete displacement coincides with the vector of the force line. Practical significance. In the laboratory, to study the bending deformations and their impact on the stability of the coal seam roof under external loads, it is advisable to use a model of a single width beam with a symmetrical section with supports, the type of which is determined by rock pressure control and secondary support of the maingate at the extraction layout of the coal mine.

scholarly journals Complex Canard Explosion in a Fractional-Order FitzHugh–Nagumo Model

2019 ◽  
Vol 29 (08) ◽  
pp. 1950111 ◽  
Author(s):  
Mohammed-Salah Abdelouahab ◽  
René Lozi ◽  
Guanrong Chen
Keyword(s):  
Dynamical System ◽  
Fractional Order ◽  
Complex Dynamics ◽  
Search Algorithm ◽  
Two Dimensional ◽  
Mixed Mode Oscillations ◽  
The Stability ◽  
Two Parameters ◽  
Complex Phenomena ◽  
Autonomous Dynamical System

This article investigates the complex phenomena of canard explosion with mixed-mode oscillations, observed from a fractional-order FitzHugh–Nagumo (FFHN) model. To rigorously analyze the dynamics of the FFHN model, a new mathematical notion, referred to as Hopf-like bifurcation (HLB), is introduced. HLB provides a precise definition for the change between a fixed point and an [Formula: see text]-asymptotically [Formula: see text]-periodic solution of the fractional-order dynamical system, as well as the stability of the FFHN model and the appearance of the HLB. The existence of canard oscillations in the neighborhoods of such HLB points are numerically investigated. Using a new algorithm, referred to as the global-local canard explosion search algorithm, the appearance of various patterns of solutions is revealed, with an increasing number of small-amplitude oscillations when two key parameters of the FFHN model are varied. The numbers of such oscillations versus the two parameters, respectively, are perfectly fitted using exponential functions. Finally, it is conjectured that chaos could occur in a two-dimensional fractional-order autonomous dynamical system, with the fractional order close to one. After all, the article demonstrates that the FFHN model is a very simple two-dimensional model with an incredible ability to present the complex dynamics of neurons.

Antimonotonicity, Chaos and Multiple Attractors in a Novel Autonomous Jerk Circuit

2017 ◽  
Vol 27 (07) ◽  
pp. 1750100 ◽  
Author(s):  
J. Kengne ◽  
A. Nguomkam Negou ◽  
Z. T. Njitacke
Keyword(s):  
Three Dimensional ◽  
Period Doubling ◽  
Basins Of Attraction ◽  
Electrical Circuit ◽  
Semiconductor Diode ◽  
Chaotic Attractors ◽  
Coexisting Attractors ◽  
Multiple Attractors ◽  
Systematic Analysis ◽  
The Stability

We perform a systematic analysis of a system consisting of a novel jerk circuit obtained by replacing the single semiconductor diode of the original jerk circuit described in [Sprott, 2011a] with a pair of semiconductor diodes connected in antiparallel. The model is described by a continuous time three-dimensional autonomous system with hyperbolic sine nonlinearity, and may be viewed as a control system with nonlinear velocity feedback. The stability of the (unique) fixed point, the local bifurcations, and the discrete symmetries of the model equations are discussed. The complex behavior of the system is categorized in terms of its parameters by using bifurcation diagrams, Lyapunov exponents, time series, Poincaré sections, and basins of attraction. Antimonotonicity, period doubling bifurcation, symmetry restoring crises, chaos, and coexisting bifurcations are reported. More interestingly, one of the key contributions of this work is the finding of various regions in the parameters’ space in which the proposed (“elegant”) jerk circuit experiences the unusual phenomenon of multiple competing attractors (i.e. coexistence of four disconnected periodic and chaotic attractors). The basins of attraction of various coexisting attractors display complexity (i.e. fractal basins boundaries), thus suggesting possible jumps between coexisting attractors in experiment. Results of theoretical analyses are perfectly traced by laboratory experimental measurements. To the best of the authors’ knowledge, the jerk circuit/system introduced in this work represents the simplest electrical circuit (only a quadruple op amplifier chip without any analog multiplier chip) reported to date capable of four disconnected periodic and chaotic attractors for the same parameters setting.

scholarly journals A physical memristor based Muthuswamy–Chua–Ginoux system

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jean-Marc Ginoux ◽  
Bharathwaj Muthuswamy ◽  
Riccardo Meucci ◽  
Stefano Euzzor ◽  
Angelo Di Garbo ◽  
...  
Keyword(s):  
Dynamical System ◽  
Chaotic System ◽  
Mathematical Analysis ◽  
Three Dimensional ◽  
Memristive Device ◽  
Nonlinear Resistor ◽  
Numerical Investigations ◽  
Double Spiral ◽  
Torus Breakdown ◽  
Autonomous Dynamical System

Abstract In 1976, Leon Chua showed that a thermistor can be modeled as a memristive device. Starting from this statement we designed a circuit that has four circuit elements: a linear passive inductor, a linear passive capacitor, a nonlinear resistor and a thermistor, that is, a nonlinear “locally active” memristor. Thus, the purpose of this work was to use a physical memristor, the thermistor, in a Muthuswamy–Chua chaotic system (circuit) instead of memristor emulators. Such circuit has been modeled by a new three-dimensional autonomous dynamical system exhibiting very particular properties such as the transition from torus breakdown to chaos. Then, mathematical analysis and detailed numerical investigations have enabled to establish that such a transition corresponds to the so-called route to Shilnikov spiral chaos but gives rise to a “double spiral attractor”.

scholarly journals Rotating 3D Flow of Hybrid Nanofluid on Exponentially Shrinking Sheet: Symmetrical Solution and Duality

Symmetry ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 1637
Author(s):  
Liaquat Ali Lund ◽  
Zurni Omar ◽  
Sumera Dero ◽  
Dumitru Baleanu ◽  
Ilyas Khan
Keyword(s):  
Differential Equations ◽  
Transfer Rate ◽  
Three Dimensional ◽  
Rotation Parameter ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
3D Flow ◽  
Exponentially Shrinking Sheet ◽  
Symmetrical Solution ◽  
The Stability

This article aims to study numerically the rotating, steady, and three-dimensional (3D) flow of a hybrid nanofluid over an exponentially shrinking sheet with the suction effect. We considered water as base fluid and alumina (Al2O3), and copper (Cu) as solid nanoparticles. The system of governing partial differential equations (PDEs) was transformed by an exponential similarity variable into the equivalent system of ordinary differential equations (ODEs). By applying a three-stage Labatto III-A method that is available in bvp4c solver in the Matlab software, the resultant system of ODEs was solved numerically. In the case of the hybrid nanofluid, the heat transfer rate improves relative to the viscous fluid and regular nanofluid. Two branches were obtained in certain ranges of the involved parameters. The results of the stability analysis revealed that the upper branch is stable. Moreover, the results also indicated that the equations of the hybrid nanofluid have a symmetrical solution for different values of the rotation parameter (Ω).

scholarly journals Global asymptotic stability of inhomogeneous iterates

2002 ◽  
Vol 29 (3) ◽  
pp. 133-142 ◽  
Author(s):  
Yong-Zhuo Chen
Keyword(s):  
Dynamical System ◽  
Asymptotic Stability ◽  
Metric Space ◽  
Complete Metric Space ◽  
Discrete Dynamical System ◽  
Closed Convex Cone ◽  
Nonlinear Difference Equations ◽  
Finite Dimensional ◽  
Uniformly Convergent ◽  
The Stability

Let(M,d)be a finite-dimensional complete metric space, and{Tn}a sequence of uniformly convergent operators onM. We study the non-autonomous discrete dynamical systemxn+1=Tnxnand the globally asymptotic stability of the inhomogeneous iterates of{Tn}. Then we apply the results to investigate the stability of equilibrium ofTwhen it satisfies certain type of sublinear conditions with respect to the partial order defined by a closed convex cone. The examples of application to nonlinear difference equations are also given.

Sign in / Sign up

Export Citation Format

Share Document