The Atomic Structure of the UO2 (111) Surface and the Effects of Additional Surface Oxygen Studied by Elevated Temperature STM

1998 ◽  
Vol 05 (01) ◽  
pp. 315-320 ◽  
Author(s):  
C. Muggelberg ◽  
M. R. Castell ◽  
G. A. D. Briggs ◽  
D. T. Goddard
Keyword(s):  
Elevated Temperature ◽  
Atomic Structure ◽  
Uranium Oxide ◽  
The Other ◽  
Surface Oxygen ◽  
Surface Termination ◽  
Sample Bias ◽  
Different Types ◽  
Stm Images ◽  
Mobile Oxygen

The structure of the UO 2+x (111) surface has been investigated by elevated temperature STM. Images of atomic terraces reveal two different types of surface termination. One of them corresponds to the stoichiometric UO 2 (111) surface and can be resolved atomically in empty state images above ~ 1.6 V sample bias. The observed (1 × 1) ordering is thought to be due to uranium states because its occurrence corresponds to the bottom of the empty uranium 5f band. On these terraces mobile oxygen forms a local [Formula: see text] superstructure. The other terrace type observed on top of the UO 2+x (111) surface is thought to be a phase of a higher uranium oxide which has grown epitaxially.

Comparative Surface Imaging Study of Multifocal Diffractive Intraocular Lenses

2021 ◽  
Author(s):  
Hyeck Soo Son ◽  
Jung Min Lee ◽  
Ramin Khoramnia ◽  
Chul Young Choi
Keyword(s):  
Imaging Study ◽  
The Other ◽  
Intraocular Lenses ◽  
Optical Surface ◽  
Diffractive Optic ◽  
Atomic Force ◽  
Acceptable Range ◽  
Different Types ◽  
Concentric Pattern

Abstract Purpose To analyse and compare the surface topography and roughness of three different types of diffractive multifocal IOLs. Methods Using scanning electron microscope (SEM, Inspect F, 5.0 KV, maximum magnification up to 20,000) and atomic force microscope (AFM, Park Systems, XE-100, non-contact, area profile comparison, 10 × 10 µm, 40 × 40 µm), the surface quality of the following diffractive IOLs was studied: the AcrySof IQ PanOptix (Alcon, USA), the AT LARA 829MP (Carl Zeiss Meditec, Germany), and Tecnis Symfony (Johnson&Johnson Vision, USA). The measurements were made over three representative areas (central non-diffractive optic, central diffractive optic, and diffractive step) of each IOL. Roughness profile in terms of mean arithmetic roughness (Ra) and root-mean-squared roughness (Rq) values were obtained and compared statistically. Results In SEM examination, all IOLs showed a smooth optical surface without any irregularities at low magnification. At higher magnification, Tecnis Symfony showed unique highly regular, concentric, and lineate structures in the diffractive optic area which could not be seen in the other studied diffractive IOLs. The differences in the measured Ra and Rq values of the Tecnis Symfony were statistically significant compared to the other models (p < 0.05). Conclusion Various different topographical traits were observed in three diffractive multifocal IOLs. The Ra values of all studied IOLs were within an acceptable range. Tecnis Symfony showed statistically significant higher surface Ra values at both central diffractive optic and diffractive step areas. Furthermore, compared to its counterparts, Tecnis Symfony demonstrated highly ordered, concentric pattern in its diffractive surfaces.

RADIATION EXPOSURE TO THE BACK WITH DIFFERENT TYPES OF APRONS

2021 ◽  
Author(s):  
Seung Wan Hong ◽  
Tae Won Kim ◽  
Jae Hun Kim
Keyword(s):  
Radiation Exposure ◽  
Effective Dose ◽  
Exposure Time ◽  
The Other ◽  
Lead Apron ◽  
Type Group ◽  
Air Kerma ◽  
Different Types ◽  
The Relationship

Abstract Physicians and nurses stand with their back towards the C-arm fluoroscope when using the computer, taking things out of closets and preparing drugs for injection or instruments for intervention. This study was conducted to investigate the relationship between the type of lead apron and radiation exposure to the backs of physicians and nurses while using C-arm fluoroscopy. We compared radiation exposure to the back in the three groups: no lead apron (group C), front coverage type (group F) and wrap-around type (group W). The other wrap-around type apron was put on the bed instead of on a patient. We ran C-arm fluoroscopy 40 times for each measurement. We collected the air kerma (AK), exposure time (ET) and effective dose (ED) of the bedside table, upper part and lower part of apron. We measured these variables 30 times for each location. In group F, ED of the upper part was the highest (p &lt; 0.001). ED of the lower part in group C and F was higher than that in group W (p = 0.012). The radiation exposure with a front coverage type apron is higher than that of the wrap-around type and even no apron at the neck or thyroid. For reducing radiation exposure to the back of physician or nurse, the wrap-around type apron is recommended. This type of apron can reduce radiation to the back when the physician turns away from the patient or C-arm fluoroscopy.

scholarly journals MITOTIC CROSSING OVER AND NONDISJUNCTION IN TRANSLOCATION HETEROZYGOTES OF ASPERGILLUS

Genetics ◽  
1976 ◽  
Vol 82 (4) ◽  
pp. 605-627
Author(s):  
Etta Käfer
Keyword(s):  
Selective Advantage ◽  
The Other ◽  
Translocation Chromosome ◽  
Crossing Over ◽  
Selective Marker ◽  
Reciprocal Translocations ◽  
Poor Growth ◽  
Different Types ◽  
Diploid Genotype ◽  
One Step

ABSTRACT To analyze mitotic recombination in translocation heterozygotes of A. nidulans two sets of well-marked diploids were constructed, homo- or heterozygous for the reciprocal translocations T1(IL;VIIR) or T2(IL;VIIIR) and heterozygous for selective markers on IL. It was found that from all translocation heterozygotes some of the expected mitotic crossover types could be selected. Such crossovers are monosomic for one translocated segment and trisomic for the other and recovery depends on the relative viabilities of these unbalanced types. The obtained segregants show characteristically reduced growth rates and conidiation dependent on sizes and types of mono- and trisomic segments, and all spontaneously produce normal diploid sectors. Such secondary diploid types either arose in one step of compensating crossing over in the other involved arm, or—more conspicuously—in two steps of nondisjunction via a trisomic intermediate.—In both of the analyzed translocations the segments translocated to IL were extremely long, while those translocated from IL were relatively short. The break in I for T1(I;VII) was located distal to the main selective marker in IL, while that of T2(I;VIII) had been mapped proximal but closely linked to it. Therefore, as expected, the selected primary crossover from the two diploids with T2(I;VIII) in coupling or in repulsion to the selective marker, showed the same chromosomal imbalance and poor growth. These could however be distinguished visually because they spontaneously produced different trisomic intermediates in the next step, in accordance with the different arrangement of the aneuploid segments. On the other hand, from diploids heterozygous for T1(I;VII) mitotic crossovers could only be selected when the selective markers were in coupling with the translocation; these crossovers were relatively well-growing and produced frequent secondary segregants of the expected trisomic, 2n+VII, type. For both translocations it was impossible to recover the reciprocal crossover types (which would be trisomic for the distal segments of I and monosomic for most of groups VII or VIII) presumably because these were too inviable to form conidia.—In addition to the selected segregants of expected types a variety of unexpected ones were isolated. The conditions of selection used favour visual detection of aneuploid types, even if these produce only a few conidial heads and are not at a selective advantage. For T2(I;VIII) these "non-selected" unbalanced segregants were mainly "reciprocal" crossovers of the same phenotype and imbalance as the selected ones. For T1(I;VII) two quite different types were obtained, both possibly originating with loss of the small VII-Itranslocation chromosome. One was isolated when the selective marker in repulsion to T1(I;VII) was used and, without being homo- or hemizygous for the selective marker, it produced stable sectors homozygous for this marker. The other was obtained from both coupling and repulsion diploids and showed a near-diploid genotype; it produced practically only haploid stable sectors of the type expected from monosomics, 2n-1 for the short translocation chromosome.

scholarly journals Development of Speech Recognition Systems in Emergency Call Centers

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 634
Author(s):  
Alakbar Valizada ◽  
Natavan Akhundova ◽  
Samir Rustamov
Keyword(s):  
Speech Recognition ◽  
Markov Model ◽  
Hidden Markov ◽  
Call Centers ◽  
The Other ◽  
Language Models ◽  
Emergency Call ◽  
Acoustic Model ◽  
Different Types ◽  
Recognition Systems

In this paper, various methodologies of acoustic and language models, as well as labeling methods for automatic speech recognition for spoken dialogues in emergency call centers were investigated and comparatively analyzed. Because of the fact that dialogue speech in call centers has specific context and noisy, emotional environments, available speech recognition systems show poor performance. Therefore, in order to accurately recognize dialogue speeches, the main modules of speech recognition systems—language models and acoustic training methodologies—as well as symmetric data labeling approaches have been investigated and analyzed. To find an effective acoustic model for dialogue data, different types of Gaussian Mixture Model/Hidden Markov Model (GMM/HMM) and Deep Neural Network/Hidden Markov Model (DNN/HMM) methodologies were trained and compared. Additionally, effective language models for dialogue systems were defined based on extrinsic and intrinsic methods. Lastly, our suggested data labeling approaches with spelling correction are compared with common labeling methods resulting in outperforming the other methods with a notable percentage. Based on the results of the experiments, we determined that DNN/HMM for an acoustic model, trigram with Kneser–Ney discounting for a language model and using spelling correction before training data for a labeling method are effective configurations for dialogue speech recognition in emergency call centers. It should be noted that this research was conducted with two different types of datasets collected from emergency calls: the Dialogue dataset (27 h), which encapsulates call agents’ speech, and the Summary dataset (53 h), which contains voiced summaries of those dialogues describing emergency cases. Even though the speech taken from the emergency call center is in the Azerbaijani language, which belongs to the Turkic group of languages, our approaches are not tightly connected to specific language features. Hence, it is anticipated that suggested approaches can be applied to the other languages of the same group.

Plausibility and Aesthetic Interpretation

1977 ◽  
Vol 7 (2) ◽  
pp. 327-340 ◽  
Author(s):  
Denis Dutton
Keyword(s):  
Scientific Inquiry ◽  
The Other ◽  
Inquiry Science ◽  
Works Of Art ◽  
Different Types ◽  
Logical Structures ◽  
The One

If a catalogue were made of terms commonly used to affirm the adequacy of critical interpretations of works of art, one word certain to be included would be “plausible.” Yet this term is one which has received precious little attention in the literature of aesthetics. This is odd, inasmuch as I find the notion of plausibility central to an understanding of the nature of criticism. “Plausible” is a perplexing term because it can have radically different meanings depending on the circumstances of its employment. ln the following discussion, I will make some observations about the logic of this concept in connection with its uses in two rather different contexts: the context of scientific inquiry on the one hand, and that of aesthetic interpretation on the other. In distinguishing separate senses of “plausible,” I shall provide reason to resist the temptation to imagine that because logical aspects of two different types of inquiry—science and criticism—happen to be designated by the same term, they may to that extent be considered to have similar logical structures.

Comparison of two types of inocula during acclimation and stable operation for nitrophenol biodegradation in an anaerobic-aerobic SBR

2006 ◽  
Vol 54 (10) ◽  
pp. 39-45
Author(s):  
A. Vargas ◽  
D. González ◽  
A. Estival ◽  
G. Buitrón
Keyword(s):  
Wastewater Treatment ◽  
Treatment Plant ◽  
The Other ◽  
Stable Operation ◽  
Reaction Phase ◽  
Toxic Compound ◽  
Anaerobic Wastewater Treatment ◽  
Significant Difference ◽  
Different Types ◽  
Batch Bioreactors

This work presents a comparison of two inocula used for the acclimation of two anaerobic-aerobic sequencing batch bioreactors used for toxic wastewater treatment. The bioreactors were acclimated with different types of sludge: one coming from an anaerobic wastewater treatment plant and the other one from a conventional aerobic activated sludge plant. The model toxic compound was p-nitrophenol, which is reduced to p-aminophenol during the initial anaerobic phase of the reaction, and later mineralized during a posterior aerated reaction phase. Biodegradation of the compounds was monitored using UV/Vis spectrophotometry. After acclimation stabilization of the sludge and of the process was also monitored. Results show that there is no significant difference in acclimation times and stability of the process between the two employed inocula, and thus an originally anaerobic inoculum presents no apparent advantage over a more easily accessible aerobic one.

scholarly journals Escherichia coli O157:H7 SURVIVAL IN TRADITIONAL AND LOW LACTOSE YOGURT DURING FERMENTATION AND COOLING PERIODS

2017 ◽  
Vol 18 (0) ◽  
Author(s):  
Camila Sampaio Cutrim ◽  
Raphael Ferreira de Barros ◽  
Robson Maia Franco ◽  
Marco Antonio Sloboda Cortez
Keyword(s):  
Escherichia Coli ◽  
The Other ◽  
Lactose Hydrolysis ◽  
Escherichia Coli O157 ◽  
E Coli ◽  
Gas Formation ◽  
Whole Milk ◽  
Milk Contamination ◽  
Different Types ◽  
Fermentation Period

Abstract The purpose of this study was to evaluate the behavior of E. coli O157:H7 during lactose hydrolysis and fermentation of traditional and low lactose yogurt. It also aimed to verify E. coli O157:H7 survival after 12 h of storage at 4 ºC ±1 ºC. Two different types of yogurts were prepared, two with whole milk and two with pre-hydrolyzed whole milk; in both groups one yogurt was inoculated with E. coli O157:H7 and the other one was not inoculated. The survival of E. coli and pH of yogurt were determined during fermentation and after 12-h refrigeration. The results showed that E. coli O157:H7 was able to grow during the fermentation period (from 4.34 log CFU.mL-1 to 6.13 log CFU.mL-1 in traditional yogurt and 4.34 log CFU.mL-1 to 6.16 log CFU.mL-1 in low lactose yogurt). The samples with E. coli O157:H7 showed gas formation and syneresis. Thus, E. coli O157:H7 was able to survive and grow during fermentation of traditional and low lactose yogurts affecting the manufacture technology. Moreover, milk contamination by E. coli before LAB addition reduces the growth of L. bulgaricus and S. thermophilus especially when associated with reduction of lactose content.

Occurrence of Bubbles in a Thin Wire at Low Reynolds Number

1992 ◽  
Vol 114 (2) ◽  
pp. 255-260 ◽  
Author(s):  
K. Sato
Keyword(s):  
Separation Zone ◽  
Reynolds Numbers ◽  
Cavitation Number ◽  
The Other ◽  
Laminar Separation ◽  
Low Reynolds Numbers ◽  
Thin Wires ◽  
Different Types ◽  
Low Reynolds ◽  
Air Diffusion

Thin wires of various diameters from 0.07 to 0.7 mm are examined about appearances and characteristics of bubble occurrence behind them in the range of low Reynolds numbers. The appearance of bubbles is very dependent on diameters of wires. Two different types of bubbles can be observed in the present experiment. One is a streamer-type bubble for smaller wires and the other is a small unspherical bubble for larger wires. The incipient and the desinent values of cavitation number also change greatly with the bubble types. The streamer-type bubble is related to the presence of laminar separation zone and the growth due to air diffusion. The small unspherical bubble can be mainly attributed to the motion of rolled-up vortices and the growth due to vaporization.

Surface Structures of Phosphorus and Indium on Si(111)

1998 ◽  
Vol 05 (01) ◽  
pp. 69-76
Author(s):  
F. P. Netzer ◽  
L. Vitali ◽  
J. Kraft ◽  
M. G. Ramesy
Keyword(s):  
Elevated Temperature ◽  
Room Temperature ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Low Energy Electron Diffraction ◽  
Diffusion Limited ◽  
Lower Terrace ◽  
Surface Reconstructions ◽  
Low Energy Electron ◽  
Stm Images

The interaction of vapor phase P2 with the [Formula: see text] monolayer surface at room temperature and elevated temperature has been monitored by scanning tunneling microscopy (STM) and spectroscopy (STS) in conjunction with Auger electron spectroscopy and low-energy electron diffraction (LEED). The surface rection can be readily followed by STM because of the very different contrast of the reacted areas in the STM images. The reaction develops around overlayer defects at room temperature and appears to be diffusion-limited, whereas at 300°C the reaction is initiated at the step edges, from which the reaction front progresses onto the lower terrace areas. At elevated temperature several ordered surface reconstructions, showing different STS fingerprints, are detected on the P–In/Si(111) surfaces, which are associated tentatively with P- and Si-terminated structures and an ordered InP phase.

FEATURES OF SELF-ACTUALIZATION OF CIVIL SERVANTS WITH DIFFERENT TYPES OF WORK MOTIVATION

2020 ◽  
pp. 119-134
Author(s):  
O. M. Kolesnikov
Keyword(s):  
Work Motivation ◽  
Social Recognition ◽  
Civil Servants ◽  
The Other ◽  
Professional Activity ◽  
Professional Work ◽  
Professional Recognition ◽  
Different Types ◽  
Self Actualization ◽  
Economic Work

An article presents the empirical study on the peculiarities of selfactualization of civil servants with different types of work motivation. The two groups of respondents (civil servants and non-governmental workers) were compared. “Professional”, “instrumental” and “patriotic” types of work motivation were more pronounced among non-governmental employees. Civil servants-respondents were less interested in work content, they were more likely to take an uninteresting job; their motives for self-improvement were less pronounced, and therefore, they were not so interested in difficult tasks, regarded by the respondents of the other group as a professional challenge and a way for self-expression. Professional recognition was not so important for civil servants as social recognition; they were less likely to think about fair remuneration for their labor. They did not so much need “the idea” as a driving force for work, as well as recognition by others of their indispensability in organizations where they worked. At the same time, a higher percentage of civil servants (in comparison with the other group) did not seek to improve their skills and were characterized by reduced professional activity, responsibility, desire to share their skills and achievements with others. It was more difficult for civil servants (compared to non-governmental workers) to live in the present, not to postpone life “for later”; they felt more insecure, were “up in the clouds”; such self-actualizing values as goodness, beauty, integrity, truth, uniqueness, psychological hardiness, justice, achievement, order, self-sufficiency, etc., although demonstrated quite closely by both groups, were still less pronounced among civil servants. The need for knowledge was also much less expressed by civil servants, as well as autonomy, independence, a sense of freedom. Civil servants were inclined to focus on other worker’s opinions and external social standards; it was more difficult for them to establish strong and friendly relationswith others; they were more anxious and insecure comparing to nongovernmental workers. Civil servants with instrumental work motivation had neither a general benevolent attitude towards people, nor the values of self-actualization in general. In contrast, civil servants with professional work motivation not only shared such values, but also valued life “here and now”, strived for knowledge and creativity in professional work. Patriotic and lumpenized types of work motivation were expressed by civil servants indirectly. At the same time, employees with the patriotic type had very similar tendencies to self-actualization as employees with the professional type: they tended to live today, appreciated a current moment, strived for harmonious relationships with others, felt natural sympathy, trust in people, sought for new knowledge. The main features of this type, according to the respondents, were increased anxiety, self-doubt, neuroticism. All identified correlations between self-actualization indicators and lumpenized work motivation were negative for civil servants. Economic work motivation was the rarest for civil servants, respectively, the corresponding selfactualization tendencies included only a friendly and impartial attitude towards other people.

Sign in / Sign up

Export Citation Format

Share Document