A Smoothed Finite Element Method (S-FEM) for Large-Deformation Elastoplastic Analysis

2015 ◽  
Vol 12 (04) ◽  
pp. 1540011 ◽  
Author(s):  
Jun Liu ◽  
Zhi-Qian Zhang ◽  
Guiyong Zhang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Large Deformation ◽  
Computational Efficiency ◽  
Triangular Element ◽  
Fem Method ◽  
Deformation Plasticity ◽  
Smoothed Finite Element Method ◽  
Edge Based ◽  
Element Method

An edge-based smoothed finite element method (ES-FEM) using 3-node triangular element was recently proposed to improve the accuracy and convergence rate of the standard finite element method (FEM) for 2D elastic solid mechanics problems. In this research, ES-FEM is extended to large-deformation plasticity analysis, and a selective edge-based/node-based smoothed finite element (selective ES/NS-FEM) method using 3-node triangular elements is adopted to address volumetric locking problem. Validity of ES-FEM for large-deformation plasticity problem is proved by benchmarks, and numerical examples demonstrate that, the proposed ES-FEM and selective ES/NS-FEM method possess (1) superior accuracy and convergence properties for strain energy solutions comparing to the standard FEM using 3-node triangular element (FEM-T3), (2) better computational efficiency than FEM-T3 and similar computational efficiency as FEM using 4-node quadrilateral element and 6-node quadratic triangular element, (3) a selective ES/NS-FEM method can successfully simulate problems with severe element distortion, and address volumetric locking problem in large-deformation plasticity analysis.

scholarly journals Dynamic Analysis of Functionally Graded Porous Plates Resting on Elastic Foundation Taking into Mass subjected to Moving Loads Using an Edge-Based Smoothed Finite Element Method

2020 ◽  
Vol 2020 ◽  
pp. 1-19
Author(s):  
Trung Thanh Tran ◽  
Quoc-Hoa Pham ◽  
Trung Nguyen-Thoi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Dynamic Analysis ◽  
Elastic Foundation ◽  
Functionally Graded ◽  
Triangular Element ◽  
Moving Loads ◽  
Smoothed Finite Element Method ◽  
Edge Based ◽  
Element Method

The paper presents the extension of an edge-based smoothed finite element method using three-node triangular elements for dynamic analysis of the functionally graded porous (FGP) plates subjected to moving loads resting on the elastic foundation taking into mass (EFTIM). In this study, the edge-based smoothed technique is integrated with the mixed interpolation of the tensorial component technique for the three-node triangular element (MITC3) to give so-called ES-MITC3, which helps improve significantly the accuracy for the standard MITC3 element. The EFTIM model is formed by adding a mass parameter of foundation into the Winkler–Pasternak foundation model. Two parameters of the FGP materials, the power-law index (k) and the maximum porosity distributions (Ω), take forms of cosine functions. Some numerical results of the proposed method are compared with those of published works to verify the accuracy and reliability. Furthermore, the effects of geometric parameters and materials on forced vibration of the FGP plates resting on the EFTIM are also studied in detail.

Accurate Viscoelastic Large Deformation Analysis Using F-Bar Aided Edge-Based Smoothed Finite Element Method for 4-Node Tetrahedral Meshes (F-BarES-FEM-T4)

2019 ◽  
Vol 17 (02) ◽  
pp. 1845003 ◽  
Author(s):  
Yuki Onishi ◽  
Ryoya Iida ◽  
Kenji Amaya
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Large Deformation ◽  
Pressure Oscillation ◽  
Deformation Analysis ◽  
Smoothed Finite Element Method ◽  
Edge Based ◽  
Smoothing Procedure ◽  
Element Method

A state-of-the-art tetrahedral smoothed finite element method, F-barES-FEM-T4, is demonstrated on viscoelastic large deformation problems. The stress relaxation of viscoelastic materials brings near incompressibility when the long-term Poisson’s ratio is close to 0.5. The conventional hybrid 4-node tetrahedral (T4) elements cannot avoid the shear locking and pressure checkerboarding issues, meanwhile F-barES-FEM-T4 can suppress these issues successfully by adopting the edge-based smoothed finite element method (ES-FEM) with the aid of the F-bar method and the cyclic smoothing procedure. A few examples of analyses verify that F-barES-FEM-T4 is locking-free and pressure oscillation-free in viscoelastic analyses as well as in nearly incompressible hyperelastic or elastoplastic analyses.

F-Bar Aided Edge-Based Smoothed Finite Element Method with 4-Node Tetrahedral Elements for Static Large Deformation Elastoplastic Problems

2019 ◽  
Vol 16 (05) ◽  
pp. 1840010 ◽  
Author(s):  
Yuki Onishi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Large Deformation ◽  
Element Formulation ◽  
Tetrahedral Elements ◽  
Smoothed Finite Element Method ◽  
New Type ◽  
Displacement Based ◽  
Edge Based ◽  
Element Method

A new type of smoothed finite element method (S-FEM), F-barES-FEM-T4, is demonstrated in static large deformation elastoplastic cases. F-barES-FEM-T4 combines the edge-based S-FEM (ES-FEM) and the node-based S-FEM (NS-FEM) for 4-node tetrahedral (T4) elements with the aid of the F-bar method in order to resolve the major issues of Selective ES/NS-FEM-T4. As well as most of the other S-FEMs, F-barES-FEM-T4 inherits pure displacement-based formulation and thus has no increase in DOF. Moreover, the cyclic smoothing procedure introduced in F-barES-FEM-T4 is effective to adjust the smoothing level so that pressure checkerboarding (oscillation) is suppressed reasonably. Some examples of static large deformation analyses for elastoplastic materials proof the excellent performance of F-barES-FEM-T4 in contrast to the conventional hybrid T4 element formulation.

Fracture simulations using edge-based smoothed finite element method for isotropic damage model via Delaunay/Voronoi dual tessellations

2021 ◽  
pp. 105678952110405
Author(s):  
Young Kwang Hwang ◽  
Suyeong Jin ◽  
Jung-Wuk Hong
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Voronoi Tessellation ◽  
Damage Model ◽  
Time Integration ◽  
Voronoi Cell ◽  
Smoothed Finite Element Method ◽  
Isotropic Damage ◽  
Edge Based ◽  
Element Method

In this study, an effective numerical framework for fracture simulations is proposed using the edge-based smoothed finite element method (ES-FEM) and isotropic damage model. The duality between the Delaunay triangulation and Voronoi tessellation is utilized for the mesh construction and the compatible use of the finite element solution with the Voronoi-cell lattice geometry. The mesh irregularity is introduced to avoid calculating the biased crack path by adding random variation in the nodal coordinates, and the ES-FEM elements are defined along the Delaunay edges. With the Voronoi tessellation, each nodal mass is calculated and the fractured surfaces are visualized along the Voronoi edges. The rotational degrees of freedom are implemented for each node by introducing the elemental formulation of the Voronoi-cell lattice model, and the accurate visualizations of the rotational motions in the Voronoi diagram are achieved. An isotropic damage model is newly incorporated into the ES-FEM formulation, and the equivalent elemental length is introduced with an additional geometric factor to simulate the consistent softening behaviors with reducing the mesh sensitivity. The full matrix form of the smoothed strain-displacement matrix is constructed for optimal use in the element-wise computations during explicit time integration, and parallel computing is implemented for the enhancement of the computational efficiency. The simulated results are compared with the theoretical solutions or experimental results, which demonstrates the effectiveness of the proposed methodology in the simulations of the quasi-brittle fractures.

Sign in / Sign up

Export Citation Format

Share Document