Methodology to achieve higher tolerance to delay variations in synchronous circuits

Author(s):  
Emre Salman ◽  
Eby G. Friedman
Buildings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 152
Author(s):  
Karin Kompatscher ◽  
Rick P. Kramer ◽  
Bart Ankersmit ◽  
Henk L. Schellen

The majority of cultural heritage is stored in archives, libraries and museum storage spaces. To reduce degradation risks, many archives adopt the use of archival boxes, among other means, to provide the necessary climate control and comply with strict legislation requirements regarding temperature and relative air humidity. A strict ambient indoor climate is assumed to provide adequate environmental conditions near objects. Guidelines and legislation provide requirements for ambient indoor climate parameters, but often do not consider other factors that influence the near-object environment, such as the use of archival boxes, airflow distribution and archival rack placement. This study aimed to provide more insight into the relation between the ambient indoor conditions in repositories and the hygrothermal conditions surrounding the collection. Comprehensive measurements were performed in a case study archive to collect ambient, local and near-object conditions. Both measurements and computational fluid dynamics (CFD) modeling were used to research temperature/relative humidity gradients and airflow distribution with a changing rack orientation, climate control strategy and supply as well as exhaust set-up in a repository. The following conclusions are presented: (i) supplying air from one air handling unit to multiple repositories on different floors leads to small temperature differences between them. Differences in ambient and local climates are noticed; (ii) archival boxes mute and delay variations in ambient conditions as expected—however, thermal radiation from the building envelope may have a large influence on the climate conditions in a box; (iii) adopting night reduction for energy conservation results in an increased influence of the external climate, with adequate insulation, this effect should be mitigated; and (iv) the specific locations of the supply air and extraction of air resulted in a vertical gradient of temperature and insufficient mixing of air, and adequate ventilation strategies should enhance sufficient air mixing in combination with the insulation of external walls, and gradient forming should be reduced.


VLSI Design ◽  
1999 ◽  
Vol 9 (2) ◽  
pp. 213-218 ◽  
Author(s):  
S. E.-D. Habib ◽  
G. J. Al-Karim

This paper reports the development of the Cairo University Waveform Relaxation (CUWORX) simulator. In order to accelerate the convergence of the waveform relaxation (WR) in the presence of logic feedback, CUWORK is initialized via a logic simulator. This logic initialization scheme is shown to be highly effective for digital synchronous circuits. Additionally, this logic initialization scheme preserves fully the multi-rate properties of the WR algorithm.


2015 ◽  
Vol 12 (2) ◽  
pp. 197-204 ◽  
Author(s):  
Esmaeel Tahanian ◽  
Hamidreza Hasani

In this paper, very compact (12mm?17mm) and simple UWB antenna is proposed. The achieved bandwidth of the presented antenna is from 3.05 GHz to 12.5 GHz and in the most of the bandwidth, the return loss is less than -20dB. In addition to frequency characteristics, time characteristics such as group delay variations for three different antenna positions, namely, front to front, back to back and side by side using CST MW studio are simulated and discussed. To improve the group delay variations, by changing the radius of the circle on the back side of the antenna, the antenna gain in different frequencies will be tuned, therefore, the time domain characteristics of the proposed antenna are greatly improved.


Sign in / Sign up

Export Citation Format

Share Document