scholarly journals Mutual Coupling Reduction Using a Protruded Ground Branch Structure in a Compact UWB Owl-Shaped MIMO Antenna

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Mutual Coupling ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) multiple input-multiple output (MIMO) antenna with high isolation is designed for UWB applications. The proposed MIMO antenna consists of two identical monopole antenna elements. To enhance the impedance matching, three slots are formed on the ground plane. The arc structure as well as the semicircle with an open-end slot is employed on the radiating elements the fact which helps to extend the impedance bandwidth of the monopole antenna from 3.1 up to 10.6 GHz, which corresponds to the UWB band. A ground branch decoupling structure is introduced between the two elements to reduce the mutual coupling. Simulation and measurement results show a bandwidth range from 3.1 to 11.12 GHz with |S11_|<−15 dB, |S21_|<−20 dB, and ECC < 0.002.

scholarly journals 8-Port Semi-Circular Arc MIMO Antenna with an Inverted L-Strip Loaded Connected Ground for UWB Applications

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1476
Author(s):  
Tathababu Addepalli ◽  
Arpan Desai ◽  
Issa Elfergani ◽  
N. Anveshkumar ◽  
Jayshri Kulkarni ◽  
...  
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Directional Pattern ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Circular Arc ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

Multiple-input multiple-output (MIMO) antennas with four and eight elements having connected grounds are designed for ultra-wideband applications. Careful optimization of the lines connecting the grounds leads to reduced mutual coupling amongst the radiating patches. The proposed antenna has a modified substrate geometry and comprises a circular arc-shaped conductive element on the top with the modified ground plane geometry. Polarization diversity and isolation are achieved by replicating the elements orthogonally forming a plus shape antenna structure. The modified ground plane consists of an inverted L strip and semi ellipse slot over the partial ground that helps the antenna in achieving effective wide bandwidth spanning from (117.91%) 2.84–11 GHz. Both 4/8-port antenna achieves a size of 0.61 λ × 0.61 λ mm2 (lowest frequency) where 4-port antenna is printed on FR4 substrate. The 4-port UWB MIMO antenna attains wide impedance bandwidth, Omni-directional pattern, isolation >15 dB, ECC < 0.015, and average gain >4.5 dB making the MIMO antenna suitable for portable UWB applications. Four element antenna structure is further extended to 8-element configuration with the connected ground where the decent value of IBW, isolation, and ECC is achieved.

A compact dual-polarized co-radiator MIMO antenna for UWB applications

2021 ◽  
pp. 1-14
Author(s):  
Harleen Kaur ◽  
Hari Shankar Singh ◽  
Rahul Upadhyay
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Dual Polarized ◽  
Uwb Applications

Abstract In this research study, a compact dual-polarized co-radiator ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna with improved impedance bandwidth and isolation is proposed for wireless applications. The designed co-radiator has an overall area of 0.3λo × 0.3λo mm2 (where, λo is free space wavelength corresponding to the lower cut-off frequency, i.e., 3.1 GHz). The proposed resonator comprises of a hybrid geometry which is created with the combinations of a circular-shaped patch, a square, and two rectangular stubs. It is centrally aligned between two 50 Ω micro-strip feed lines that are positioned orthogonal to each other. Further, the modified ground plane is attached with the end-loaded line which provides broadband isolation over entire UWB frequency band. The simulated results of the proposed antenna exhibit wideband characteristics with impedance bandwidth of 3.1–16.9 GHz with minimum isolation of −15 dB. Moreover, all the radiation performance parameters are analyzed and discussed. Some important diversity parameters such as envelope correlation coefficient, mean effective gain, effective diversity gain, and channel capacity loss have also been evaluated. Furthermore, all the measured results of proposed antenna agree well with the simulated results which make the proposed antenna a suitable candidate for UWB-MIMO wireless applications.

scholarly journals Bandwidth Enhancement and Mutual Coupling Reduction Using a Notch and a Parasitic Structure in a UWB-MIMO Antenna

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Jiwan Ghimire ◽  
Kwang-Wook Choi ◽  
Dong-You Choi
Keyword(s):  
Mutual Coupling ◽  
Mimo Systems ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Back Side ◽  
Bandwidth Enhancement ◽  
Mimo Antenna ◽  
Input Multiple Output

The correlation between the antennas of multiple-input, multiple-output (MIMO) systems in limited spaces and size degrades the performance and capacity by either using complex coupling or decoupling structures. For isolation improvement, this paper presents the simple design of a compact high-isolation ultra-wideband (UWB) MIMO antenna with a circular parasitic element at the back side of the radiating patch, thereby creating the reverse coupling and helping reduce the mutual coupling at the upper part of the frequency bands, and a small rectangular notch at the ground plane to extend the impedance bandwidth of the monopole antenna. This approach eliminates the use of complex coupling or decoupling structures and complex feeding networks. A novel feature of our design is that the MIMO antenna exhibits a very low envelope correlation coefficient (ECC < 0.007) with high diversity gain (DG > 9.99) and wide impedance bandwidth of 139 % from 3.1 to 17.5 GHz applicable for not only UWB application, but also next generation wireless communication, 5G. The high peak gain over the entire UWB and the upper part of the overall frequency band ensure that the antenna can be used in MIMO applications owing to the close agreement between the simulated and measured results.

A compact dual port UWB-MIMO/diversity antenna for indoor application

2017 ◽  
Vol 10 (3) ◽  
pp. 360-367 ◽  
Author(s):  
Sonika Priyadarsini Biswal ◽  
Sushrut Das
Keyword(s):  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Open Circuit ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Good Prospect ◽  
Mimo Antenna ◽  
Radiating Element ◽  
Input Multiple Output

A compact printed quadrant shaped monopole antenna is introduced in this paper as a good prospect for ultra wideband- multiple-input multiple-output (UWB-MIMO) system. The proposed MIMO antenna comprises two perpendicularly oriented monopoles to employ polarization diversity. An open circuit folded stub is extended from the ground plane of each radiating element to enhance the impedance bandwidth satisfying the UWB criteria. Two ‘L’ shaped slots are further etched on the radiator to provide good isolation performance between two radiators. The desirable radiator performances and diversity performances are ensured by simulation and/or measurement of the reflection coefficient, radiation pattern, realized peak gain, envelope correlation coefficient (ECC), diversity gain, mean effective gain (MEG) ratio and channel capacity loss (CCL). Results indicate that the proposed antenna exhibits 2.9–11 GHz 10 dB return loss bandwidth, mutual coupling <−20 dB, ECC < 0.003, MEG ratio ≈ 1, and CCL < 0.038 Bpsec/Hz, making it a good candidate for UWB and MIMO diversity application.

scholarly journals Minimization of Mutual Coupling Using Neutralization Line Technique for 2.4 GHz Wireless Applications

2015 ◽  
Vol 6 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Wan Noor Najwa Wan Marzudi ◽  
Zuhairiah Zainal Abidin ◽  
Siti Zarina Mohd Muji ◽  
Yue Ma ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Reflection Coefficient ◽  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Input Multiple Output ◽  
Neutralization Line

This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

A miniaturized UWB-MIMO antenna with quadruple band-notched characteristics

2018 ◽  
Vol 10 (8) ◽  
pp. 948-955 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia ◽  
Xia Cao ◽  
Zhengtao Xu
Keyword(s):  
Frequency Band ◽  
Satellite Communication ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

AbstractA simple multiple-input-multiple-output (MIMO) antenna with quad-band-notched characteristics for ultra-wideband (UWB) system is proposed and tested in the article. Based on two similar radiators, the UWB-MIMO system only occupies 22 mm × 28 mm. By etching an inverted L-like meander slot, two inverted L-shaped slots, and adding a C-shaped stub beside the feeding line, four notched bands are realized (3.25–3.6, 5.05–5.48, 5.6–6, and 7.8–8.4 GHz) to suppress interference from WiMAX, lower WLAN, upper WLAN, and uplink of X-band satellite communication system. With a T-like stub extruding from the ground plane, port isolation is effectively improved. The results show that the antenna covers 3.1–10.6 GHz UWB frequency band except four rejected bands and has high isolation of better than −20 dB over most of the frequency band. Moreover, envelope correlation coefficient and good radiation patterns also prove that the introduced antenna is suitable for UWB applications.

scholarly journals High-Isolation UWB MIMO Antenna with Multiple X-Shaped Stubs Loaded between Ground Planes

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Minghuan Wang ◽  
Jingchang Nan ◽  
Jing Liu
Keyword(s):  
Frequency Band ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Antenna Structure ◽  
Mimo Antenna ◽  
High Isolation ◽  
Input Multiple Output

A miniaturized ultra-wideband multiple-input multiple-output (UWB MIMO) two-port antenna with high isolation based on FR4 is designed in this article. The size of the antenna is only 18 × 28 × 1.6 mm3. The MIMO antenna consists of two identical antenna elements symmetrically placed on the same dielectric substrate in opposite directions. By loading three crossed X-shaped stubs between two unconnected ground planes, high isolation and good impedance matching are achieved. The working frequency band measured by this UWB MIMO antenna is 1.9–14 GHz, and the isolation is kept above 20.2 dB in the whole analysis frequency band. Good radiation characteristics as well as envelope correlation coefficient (ECC, <0.09), mean effective gain (MEG), and channel capacity loss (CCL) in the passband meet the requirements of the application, which can be applied to the UWB wireless communication system. To verify the applicability of the proposed method for enhancing the isolation between antenna elements, the two-port antenna structure was extended to a four-port antenna structure. In the case of loading the X-shaped stubs to connect to the ground plane, the isolation of the antenna is maintained above 15.5 dB within 1.7–14 GHz.

scholarly journals Design of Band-Notched MIMO Antenna for UWB Applications

2021 ◽  
pp. 1-7
Author(s):  
Ahmed Shaker ◽  
◽  
Ayman Haggag
Keyword(s):  
Return Loss ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Total Size ◽  
Mimo Antenna ◽  
Notched Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna with a notched band is presented. The proposed design consists of four unipolar UWB radiators, and these monopole radiators are placed perpendicular to each other to exploit polarization diversity, where the four-element ultra-wideband (UWB) Multiple-Input-Multiple-Output (MIMO) antenna is presented. The total size of the antenna is 60x60 mm2. The operating frequency of the antenna is 3.1–11 GHz with a return loss of less than 10 dB, except at the notched band of 4.9– 5.9 GHz. This antenna consists of an isosceles trapezoidal plate with a circular notch cut and two transitional steps as well as a partial ground plane. For UWB bandwidth enhancement techniques: use of a partial ground plane, and modify the gap between the radioactive element and ground plane technique, using steps to control the resistance stability and a notch cut technique. The notch cut from the radiator is too used to reduce the size of the plane antenna. The measured -10 dB return loss bandwidth for the designed antenna is about 116.3% (8.7 GHz). The MIMO antenna does not require any additional structure to improve insulation. The proposed antenna supplies an acceptable radiation pattern and relatively flat gain over the entire frequency band.

scholarly journals Isolation Enhancement Using a Hybrid Technique in an Eight-Element UWB MIMO Antenna Design

2020 ◽  
Vol 9 (3) ◽  
pp. 56-65
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Correlation Coefficients ◽  
Ultra Wideband ◽  
Hybrid Technique ◽  
Good Efficiency ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

A high order multiple input multiple output (MIMO) antenna assembly is designed for Ultra-Wideband (UWB) applications. The antenna configuration is based on a peculiar arrangement of the radiating elements. A defected microstrip structure is also introduced on the feedlines. The use of a novel technique, the so-called ports-shift, is here discussed. In the proposed antenna, a protruded ground branch structure is employed in combination of three parasitic stubs so as to enhance isolation and impedance matching over the UWB frequency band. The results show that the presented antenna exhibits a good impedance matching which is about -10 dB with a high mutual coupling 15 dB, and envelope correlation coefficients (ECC) smaller than 0.15. The antenna also exhibits good diversity gain of about 9.5, and a good efficiency that varied between 56% and 91% and total active reflection coefficient of less than -20 dB. Which makes it a good candidate for UWB applications.

Isolation Enhancement between Ports of a Compact Ultra-wideband MIMO Antenna

2021 ◽  
Vol 36 (1) ◽  
pp. 61-66
Author(s):  
Yantao Yu ◽  
Shenshen Mao ◽  
Meng Li ◽  
Danting He
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Dielectric Substrate ◽  
Spatial Diversity ◽  
Ultra Wideband ◽  
Back Side ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

In this paper, a novel compact multiple-input multiple-output (MIMO) antenna with enhanced port isolation is proposed for ultra-wideband (UWB) applications. The UWB MIMO antenna contains two coplanar annular monopoles etched on the front side of the FR-4 substrate. The dielectric substrate has a relative permittivity of 4.4 and a size of 80 mm × 40 mm × 1.6 mm. The irregular ground is printed on the back side of the substrate. In order to enhance the port isolation between the two monopoles, the expanded ground is exploited in the proposed design. In addition, the ground is etched with some slots to achieve good impedance matching. Both the simulated and measured results show that the proposed antenna achieves good impedance matching as well as high port isolation over the entire UWB band. Moreover, the proposed antenna has good spatial diversity characteristics. In summary, the proposed UWB MIMO antenna can be well applied to the ultra-wideband wireless communication system.

Sign in / Sign up

Export Citation Format

Share Document