scholarly journals Sources of Artifacts in SLODR Detection

2021 ◽  
Vol 14 (1) ◽  
pp. 86-100
Author(s):  
Aleksei A. Korneev ◽  
Anatoly N. Krichevets ◽  
Konstantin V. Sugonyaev ◽  
Dmitriy V. Ushakov ◽  
Alexander G. Vinogradov ◽  
...  
Keyword(s):  
Correlation Matrix ◽  
Simulated Data ◽  
Real Data ◽  
False Identification ◽  
Data Set ◽  
The Third ◽  
Intellectual Abilities ◽  
The Matrix ◽  
Simulation Parameters ◽  
Selection Of

Background. Spearman’s law of diminishing returns (SLODR) states that intercorrelations between scores on tests of intellectual abilities were higher when the data set was comprised of subjects with lower intellectual abilities and vice versa. After almost a hundred years of research, this trend has only been detected on average. Objective. To determine whether the very different results were obtained due to variations in scaling and the selection of subjects. Design. We used three methods for SLODR detection based on moderated factor analysis (MFCA) to test real data and three sets of simulated data. Of the latter group, the first one simulated a real SLODR effect. The second one simulated the case of a different density of tasks of varying difficulty; it did not have a real SLODR effect. The third one simulated a skewed selection of respondents with different abilities and also did not have a real SLODR effect. We selected the simulation parameters so that the correlation matrix of the simulated data was similar to the matrix created from the real data, and all distributions had similar skewness parameters (about -0.3). Results. The results of MFCA are contradictory and we cannot clearly distinguish by this method the dataset with real SLODR from datasets with similar correlation structure and skewness, but without a real SLODR effect. Theresults allow us to conclude that when effects like SLODR are very subtle and can be identified only with a large sample, then features of the psychometric scale become very important, because small variations of scale metrics may lead either to masking of real SLODR or to false identification of SLODR.

A Growth Model for Multilevel Ordinal Data

2005 ◽  
Vol 30 (4) ◽  
pp. 369-396 ◽  
Author(s):  
Eisuke Segawa
Keyword(s):  
Latent Variable ◽  
Ordinal Data ◽  
Linear Models ◽  
Growth Models ◽  
Simulated Data ◽  
Real Data ◽  
Analytic Structure ◽  
Data Sets ◽  
Data Set ◽  
Time Points

Multi-indicator growth models were formulated as special three-level hierarchical generalized linear models to analyze growth of a trait latent variable measured by ordinal items. Items are nested within a time-point, and time-points are nested within subject. These models are special because they include factor analytic structure. This model can analyze not only data with item- and time-level missing observations, but also data with time points freely specified over subjects. Furthermore, features useful for longitudinal analyses, “autoregressive error degree one” structure for the trait residuals and estimated time-scores, were included. The approach is Bayesian with Markov Chain and Monte Carlo, and the model is implemented in WinBUGS. They are illustrated with two simulated data sets and one real data set with planned missing items within a scale.

scholarly journals Iterative Image Reconstruction for Limited-Angle CT Using Optimized Initial Image

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Jingyu Guo ◽  
Hongliang Qi ◽  
Yuan Xu ◽  
Zijia Chen ◽  
Shulong Li ◽  
...  
Keyword(s):  
Iterative Reconstruction ◽  
Simulated Data ◽  
Real Data ◽  
Clinical Applications ◽  
Data Reconstruction ◽  
Reconstruction Algorithms ◽  
Initial Image ◽  
Reconstruction Performance ◽  
Selection Of ◽  
Limited Angle

Limited-angle computed tomography (CT) has great impact in some clinical applications. Existing iterative reconstruction algorithms could not reconstruct high-quality images, leading to severe artifacts nearby edges. Optimal selection of initial image would influence the iterative reconstruction performance but has not been studied deeply yet. In this work, we proposed to generate optimized initial image followed by total variation (TV) based iterative reconstruction considering the feature of image symmetry. The simulated data and real data reconstruction results indicate that the proposed method effectively removes the artifacts nearby edges.

scholarly journals HAHap: a read-based haplotyping method using hierarchical assembly

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5852
Author(s):  
Yu-Yu Lin ◽  
Ping Chun Wu ◽  
Pei-Lung Chen ◽  
Yen-Jen Oyang ◽  
Chien-Yu Chen
Keyword(s):  
Simulated Data ◽  
Real Data ◽  
Error Rates ◽  
Lower Number ◽  
Nucleotide Polymorphism ◽  
Single Nucleotide ◽  
Hierarchical Assembly ◽  
Sequencing Technologies ◽  
Error Corrections ◽  
Selection Of

Background The need for read-based phasing arises with advances in sequencing technologies. The minimum error correction (MEC) approach is the primary trend to resolve haplotypes by reducing conflicts in a single nucleotide polymorphism-fragment matrix. However, it is frequently observed that the solution with the optimal MEC might not be the real haplotypes, due to the fact that MEC methods consider all positions together and sometimes the conflicts in noisy regions might mislead the selection of corrections. To tackle this problem, we present a hierarchical assembly-based method designed to progressively resolve local conflicts. Results This study presents HAHap, a new phasing algorithm based on hierarchical assembly. HAHap leverages high-confident variant pairs to build haplotypes progressively. The phasing results by HAHap on both real and simulated data, compared to other MEC-based methods, revealed better phasing error rates for constructing haplotypes using short reads from whole-genome sequencing. We compared the number of error corrections (ECs) on real data with other methods, and it reveals the ability of HAHap to predict haplotypes with a lower number of ECs. We also used simulated data to investigate the behavior of HAHap under different sequencing conditions, highlighting the applicability of HAHap in certain situations.

scholarly journals An update on multivariate return periods in hydrology

2016 ◽  
Vol 373 ◽  
pp. 175-178 ◽  
Author(s):  
Benedikt Gräler ◽  
Andrea Petroselli ◽  
Salvatore Grimaldi ◽  
Bernard De Baets ◽  
Niko Verhoest
Keyword(s):  
Time Series ◽  
Return Period ◽  
Simulated Data ◽  
Time Span ◽  
Return Periods ◽  
Data Set ◽  
Univariate Case ◽  
Definition Of ◽  
Selection Of

Abstract. Many hydrological studies are devoted to the identification of events that are expected to occur on average within a certain time span. While this topic is well established in the univariate case, recent advances focus on a multivariate characterization of events based on copulas. Following a previous study, we show how the definition of the survival Kendall return period fits into the set of multivariate return periods.Moreover, we preliminary investigate the ability of the multivariate return period definitions to select maximal events from a time series. Starting from a rich simulated data set, we show how similar the selection of events from a data set is. It can be deduced from the study and theoretically underpinned that the strength of correlation in the sample influences the differences between the selection of maximal events.

scholarly journals SSP: An R package to estimate sampling effort in studies of ecological communities

2020 ◽  
Author(s):  
Edlin J. Guerra-Castro ◽  
Juan Carlos Cajas ◽  
Nuno Simões ◽  
Juan J Cruz-Motta ◽  
Maite Mascaró
Keyword(s):  
Simulated Data ◽  
Real Data ◽  
R Package ◽  
Sampling Effort ◽  
Ecological Communities ◽  
Ecological Data ◽  
Data Set ◽  
Pilot Studies ◽  
Ecological Features ◽  
Wide Range

ABSTRACTSSP (simulation-based sampling protocol) is an R package that uses simulation of ecological data and dissimilarity-based multivariate standard error (MultSE) as an estimator of precision to evaluate the adequacy of different sampling efforts for studies that will test hypothesis using permutational multivariate analysis of variance. The procedure consists in simulating several extensive data matrixes that mimic some of the relevant ecological features of the community of interest using a pilot data set. For each simulated data, several sampling efforts are repeatedly executed and MultSE calculated. The mean value, 0.025 and 0.975 quantiles of MultSE for each sampling effort across all simulated data are then estimated and standardized regarding the lowest sampling effort. The optimal sampling effort is identified as that in which the increase in sampling effort do not improve the precision beyond a threshold value (e.g. 2.5 %). The performance of SSP was validated using real data, and in all examples the simulated data mimicked well the real data, allowing to evaluate the relationship MultSE – n beyond the sampling size of the pilot studies. SSP can be used to estimate sample size in a wide range of situations, ranging from simple (e.g. single site) to more complex (e.g. several sites for different habitats) experimental designs. The latter constitutes an important advantage, since it offers new possibilities for complex sampling designs, as it has been advised for multi-scale studies in ecology.

Smoothing Gene Expression Data with Network Information Improves Consistency of Regulated Genes

2011 ◽  
Vol 10 (1) ◽  
Author(s):  
Guro Dørum ◽  
Lars Snipen ◽  
Margrete Solheim ◽  
Solve Saebo
Keyword(s):  
Gene Expression ◽  
Gene Expression Data ◽  
Gene Networks ◽  
Simulated Data ◽  
Real Data ◽  
Biological Knowledge ◽  
Expression Data ◽  
Data Set ◽  
Gene Set ◽  
Network Information

Gene set analysis methods have become a widely used tool for including prior biological knowledge in the statistical analysis of gene expression data. Advantages of these methods include increased sensitivity, easier interpretation and more conformity in the results. However, gene set methods do not employ all the available information about gene relations. Genes are arranged in complex networks where the network distances contain detailed information about inter-gene dependencies. We propose a method that uses gene networks to smooth gene expression data with the aim of reducing the number of false positives and identify important subnetworks. Gene dependencies are extracted from the network topology and are used to smooth genewise test statistics. To find the optimal degree of smoothing, we propose using a criterion that considers the correlation between the network and the data. The network smoothing is shown to improve the ability to identify important genes in simulated data. Applied to a real data set, the smoothing accentuates parts of the network with a high density of differentially expressed genes.

ESTIMATION OF EXTREME QUANTILES: EMPIRICAL TOOLS FOR METHODS ASSESSMENT AND COMPARISON

2000 ◽  
Vol 07 (01) ◽  
pp. 75-94 ◽  
Author(s):  
J. DIEBOLT ◽  
M.-A. EL-AROUI ◽  
V. DURBEC ◽  
B. VILLAIN
Keyword(s):  
Goodness Of Fit ◽  
Simulated Data ◽  
Real Data ◽  
Data Sets ◽  
Data Set ◽  
Extreme Quantiles ◽  
Maintenance Policies ◽  
Simulated Data Sets ◽  
Industrial Context

When extreme quantiles have to be estimated from a given data set, the classical parametric approach can lead to very poor estimations. This has led to the introduction of specific methods for estimating extreme quantiles (MEEQ's) in a nonparametric spirit, e.g., Pickands excess method, methods based on Hill's estimate of the Pareto index, exponential tail (ET) and quadratic tail (QT) methods. However, no practical technique for assessing and comparing these MEEQ's when they are to be used on a given data set is available. This paper is a first attempt to provide such techniques. We first compare the estimations given by the main MEEQ's on several simulated data sets. Then we suggest goodness-of-fit (Gof) tests to assess the MEEQ's by measuring the quality of their underlying approximations. It is shown that Gof techniques bring very relevant tools to assess and compare ET and excess methods. Other empirical criterions for comparing MEEQ's are also proposed and studied through Monte-Carlo analyses. Finally, these assessment and comparison techniques are experimented on real-data sets issued from an industrial context where extreme quantiles are needed to define maintenance policies.

scholarly journals Single-Cell Transcriptome Profiling Simulation Reveals the Impact of Sequencing Parameters and Algorithms on Clustering

Life ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 716
Author(s):  
Yunhe Liu ◽  
Aoshen Wu ◽  
Xueqing Peng ◽  
Xiaona Liu ◽  
Gang Liu ◽  
...  
Keyword(s):  
Clustering Algorithms ◽  
Simulated Data ◽  
Ground Truth ◽  
Real Data ◽  
Transcriptome Profiling ◽  
Actual Data ◽  
Generation Process ◽  
Data Generation ◽  
The Matrix ◽  
The Impact

Despite the scRNA-seq analytic algorithms developed, their performance for cell clustering cannot be quantified due to the unknown “true” clusters. Referencing the transcriptomic heterogeneity of cell clusters, a “true” mRNA number matrix of cell individuals was defined as ground truth. Based on the matrix and the actual data generation procedure, a simulation program (SSCRNA) for raw data was developed. Subsequently, the consistency between simulated data and real data was evaluated. Furthermore, the impact of sequencing depth and algorithms for analyses on cluster accuracy was quantified. As a result, the simulation result was highly consistent with that of the actual data. Among the clustering algorithms, the Gaussian normalization method was the more recommended. As for the clustering algorithms, the K-means clustering method was more stable than K-means plus Louvain clustering. In conclusion, the scRNA simulation algorithm developed restores the actual data generation process, discovers the impact of parameters on classification, compares the normalization/clustering algorithms, and provides novel insight into scRNA analyses.

Identifying and Classifying Aberrant Response Patterns Through Functional Data Analysis

2020 ◽  
Vol 45 (6) ◽  
pp. 719-749
Author(s):  
Eduardo Doval ◽  
Pedro Delicado
Keyword(s):  
Data Analysis ◽  
Functional Data Analysis ◽  
Functional Data ◽  
Simulated Data ◽  
Real Data ◽  
Response Patterns ◽  
Fit Indices ◽  
Person Fit ◽  
Data Set ◽  
Aberrant Response Patterns

We propose new methods for identifying and classifying aberrant response patterns (ARPs) by means of functional data analysis. These methods take the person response function (PRF) of an individual and compare it with the pattern that would correspond to a generic individual of the same ability according to the item-person response surface. ARPs correspond to atypical difference functions. The ARP classification is done with functional data clustering applied to the PRFs identified as ARP. We apply these methods to two sets of simulated data (the first is used to illustrate the ARP identification methods and the second demonstrates classification of the response patterns flagged as ARP) and a real data set (a Grade 12 science assessment test, SAT, with 32 items answered by 600 examinees). For comparative purposes, ARPs are also identified with three nonparametric person-fit indices (Ht, Modified Caution Index, and ZU3). Our results indicate that the ARP detection ability of one of our proposed methods is comparable to that of person-fit indices. Moreover, the proposed classification methods enable ARP associated with either spuriously low or spuriously high scores to be distinguished.

scholarly journals Fully Moderated T-statistic for Small Sample Size Gene Expression Arrays

2011 ◽  
Vol 10 (1) ◽  
Author(s):  
Lianbo Yu ◽  
Parul Gulati ◽  
Soledad Fernandez ◽  
Michael Pennell ◽  
Lawrence Kirschner ◽  
...  
Keyword(s):  
Gene Expression ◽  
Small Sample Size ◽  
Simulated Data ◽  
Real Data ◽  
Small Sample ◽  
Data Set ◽  
Expression Arrays ◽  
Gene Expression Arrays ◽  
Higher Power ◽  
Constant Coefficient Of Variation

Gene expression microarray experiments with few replications lead to great variability in estimates of gene variances. Several Bayesian methods have been developed to reduce this variability and to increase power. Thus far, moderated t methods assumed a constant coefficient of variation (CV) for the gene variances. We provide evidence against this assumption, and extend the method by allowing the CV to vary with gene expression. Our CV varying method, which we refer to as the fully moderated t-statistic, was compared to three other methods (ordinary t, and two moderated t predecessors). A simulation study and a familiar spike-in data set were used to assess the performance of the testing methods. The results showed that our CV varying method had higher power than the other three methods, identified a greater number of true positives in spike-in data, fit simulated data under varying assumptions very well, and in a real data set better identified higher expressing genes that were consistent with functional pathways associated with the experiments.

Sign in / Sign up

Export Citation Format

Share Document