forced-evacuation-of-welfare-centre-for-displaced-persons-set-up-at-the-vivekananda-mission-hall-in-kotahena-colombo-14-july-7-1993-6-pp

2016 ◽  
Keyword(s):  
Displaced Persons ◽  
Welfare Centre ◽  
Set Up

Africa — Latin America — Asia and Pacific — Middle East

1986 ◽  
Vol 26 (251) ◽  
pp. 115-124
Keyword(s):  
Latin America ◽  
Middle East ◽  
Large Scale ◽  
The Other ◽  
Displaced Persons ◽  
Assistance Programme ◽  
Medical Teams ◽  
Set Up ◽  
The One ◽  
Voluntary Agencies

In January and February, the ICRC reduced, as planned, the level of its relief activities in Ethiopia. This reduction was made possible, on the one hand, by an increase in food supplies for the population in the northern provinces of that country affected by conflict and drought and, on the other, by more intensive activity on the part of other voluntary agencies in the area. While leaving in place the structures which would enable it rapidly to set up a large-scale assistance programme if the need were to appear in a given region, the ICRC has lowered the volume of its general relief distributions. In December 1985, 10,700 tonnes were distributed to 830,000 persons. This was reduced to 5,000 tonnes for 424,300 persons in January, and further to 2,800 tonnes for 181,000 persons in February in the provinces of Eritrea, Tigray, Wollo, Gondar and Hararge. The last three therapeutic feeding centres were closed on 16 January (Wukro), and on 16 and 27 February (Idaga Hamus and Adwa). However, ICRC medical teams continued to monitor the health of the populations living in provinces which were receiving assistance, concentrating their activities on groups of displaced persons in Eritrea (in the region between Keren and Barentu), Tigray (in the region between Aksum and Adwa and the region of Mehony), Wollo (in the region of Sekota) and Hararge (Wobera Woreda; Habro Woreda), all areas with major security problems.

Africa — Latin America — Asia — Middle East

1988 ◽  
Vol 28 (267) ◽  
pp. 546-550
Keyword(s):  
Latin America ◽  
Middle East ◽  
Displaced Persons ◽  
Set Up

The ICRC assisted more than 12 000 persons in northern Burundi following the outbreaks in August of violent ethnic disputes. Blankets, clothing, soap, cooking utensils and farming tools were distributed from mid-September to the affected population.Relief materials were in part transported by truck from Uganda and in part purchased locally by the ICRC.Distributions took place in the villages of Ntega and Marangara, near the border with Rwanda, where the recent clashes had occurred. Delegates distributed supplies first in the centres set up for displaced persons, then in the hills to which the population was gradually returning.

The Effects of Drying Techniques on Clay-Rich Soil Texture

1974 ◽  
Vol 32 ◽  
pp. 466-467
Author(s):  
T. G. Naymik
Keyword(s):  
Critical Point ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Drying Methods ◽  
Air Drying ◽  
Freeze Dried ◽  
Critical Point Drying ◽  
Set Up ◽  
The Relationship ◽  
Quartz Grains

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.

Evaluation of Freezing Methods by Low Temperature X-Ray Diffraction

1977 ◽  
Vol 35 ◽  
pp. 330-333
Author(s):  
T. Gulik-Krzywicki ◽  
M.J. Costello
Keyword(s):  
Biological Materials ◽  
Molecular Organization ◽  
X Ray Diffraction ◽  
Glass Capillary ◽  
X Ray ◽  
Rate Dependent ◽  
Before And After ◽  
Freeze Etching ◽  
Diffraction Patterns ◽  
Set Up

Freeze-etching electron microscopy is currently one of the best methods for studying molecular organization of biological materials. Its application, however, is still limited by our imprecise knowledge about the perturbations of the original organization which may occur during quenching and fracturing of the samples and during the replication of fractured surfaces. Although it is well known that the preservation of the molecular organization of biological materials is critically dependent on the rate of freezing of the samples, little information is presently available concerning the nature and the extent of freezing-rate dependent perturbations of the original organizations. In order to obtain this information, we have developed a method based on the comparison of x-ray diffraction patterns of samples before and after freezing, prior to fracturing and replication.Our experimental set-up is shown in Fig. 1. The sample to be quenched is placed on its holder which is then mounted on a small metal holder (O) fixed on a glass capillary (p), whose position is controlled by a micromanipulator.

Eels Under Standing Wave Conditions

1982 ◽  
Vol 40 ◽  
pp. 492-495
Author(s):  
O.L. Krivanek ◽  
J. TaftØ
Keyword(s):  
Standing Wave ◽  
Wave Conditions ◽  
Set Up ◽  
A Site ◽  
Complex Crystal

It is well known that a standing electron wavefield can be set up in a crystal such that its intensity peaks at the atomic sites or between the sites or in the case of more complex crystal, at one or another type of a site. The effect is usually referred to as channelling but this term is not entirely appropriate; by analogy with the more established particle channelling, electrons would have to be described as channelling either through the channels or through the channel walls, depending on the diffraction conditions.

Low-Loss Images in a Stem/Tem Microscope

1976 ◽  
Vol 34 ◽  
pp. 496-497 ◽  
Author(s):  
David C. Joy ◽  
Dennis M. Maher
Keyword(s):  
High Resolution ◽  
Surface Topography ◽  
Beam Direction ◽  
Low Loss ◽  
Specimen Holder ◽  
Glancing Angle ◽  
High Resolution Images ◽  
Set Up ◽  
Conventional Manner ◽  
Objective Type

High-resolution images of the surface topography of solid specimens can be obtained using the low-loss technique of Wells. If the specimen is placed inside a lens of the condenser/objective type, then it has been shown that the lens itself can be used to collect and filter the low-loss electrons. Since the probeforming lenses in TEM instruments fitted with scanning attachments are of this type, low-loss imaging should be possible.High-resolution, low-loss images have been obtained in a JEOL JEM 100B fitted with a scanning attachment and a thermal, fieldemission gun. No modifications were made to the instrument, but a wedge-shaped, specimen holder was made to fit the side-entry, goniometer stage. Thus the specimen is oriented initially at a glancing angle of about 30° to the beam direction. The instrument is set up in the conventional manner for STEM operation with all the lenses, including the projector, excited.

UHV-TEM studies of laser-induced damage

1991 ◽  
Vol 49 ◽  
pp. 632-633
Author(s):  
T.S. Savage ◽  
R. Ai ◽  
D. Dunn ◽  
L.D. Marks
Keyword(s):  
Surface Science ◽  
Rapid Heating ◽  
Local Heating ◽  
Routine Practice ◽  
Transmission Electron ◽  
Northwestern University ◽  
Laser Induced Damage ◽  
Set Up ◽  
Focusing Lens ◽  
Diffusion Of Impurities

The use of lasers for surface annealing, heating and/or damage has become a routine practice in the study of materials. Lasers have been closely looked at as an annealing technique for silicon and other semiconductors. They allow for local heating from a beam which can be focused and tuned to different wavelengths for specific tasks. Pulsed dye lasers allow for short, quick bursts which can allow the sample to be rapidly heated and quenched. This short, rapid heating period may be important for cases where diffusion of impurities or dopants may not be desirable.At Northwestern University, a Candela SLL - 250 pulsed dye laser, with a maximum power of 1 Joule/pulse over 350 - 400 nanoseconds, has been set up in conjunction with a Hitachi UHV-H9000 transmission electron microscope. The laser beam is introduced into the surface science chamber through a series of mirrors, a focusing lens and a six inch quartz window.

A simple way for producing holographic filters suitable for image improvement

1978 ◽  
Vol 36 (1) ◽  
pp. 226-227
Author(s):  
K.-H. Herrmann ◽  
E. Reuber ◽  
P. Schiske
Keyword(s):  
Transfer Functions ◽  
Diffraction Order ◽  
Lateral Position ◽  
Simple Method ◽  
Spatial Frequencies ◽  
Resolution Electron ◽  
Wiener Filters ◽  
Image Improvement ◽  
Optical Reconstruction ◽  
Set Up

Aposteriori deblurring of high resolution electron micrographs of weak phase objects can be performed by holographic filters [1,2] which are arranged in the Fourier domain of a light-optical reconstruction set-up. According to the diffraction efficiency and the lateral position of the grating structure, the filters permit adjustment of the amplitudes and phases of the spatial frequencies in the image which is obtained in the first diffraction order.In the case of bright field imaging with axial illumination, the Contrast Transfer Functions (CTF) are oscillating, but real. For different imageforming conditions and several signal-to-noise ratios an extensive set of Wiener-filters should be available. A simple method of producing such filters by only photographic and mechanical means will be described here.A transparent master grating with 6.25 lines/mm and 160 mm diameter was produced by a high precision computer plotter. It is photographed through a rotating mask, plotted by a standard plotter.

3-D optical transfer in excitation field synthesis microscopes

1995 ◽  
Vol 53 ◽  
pp. 64-65
Author(s):  
Vijay Krishnamurthi ◽  
Brent Bailey ◽  
Frederick Lanni
Keyword(s):  
Standing Wave ◽  
Spatial Information ◽  
3D Structure ◽  
Complete Recovery ◽  
Weighting Factor ◽  
Optical Transfer Function ◽  
Excitation Field ◽  
Optical Transfer ◽  
Set Up ◽  
Focus Plane

Excitation field synthesis (EFS) refers to the use of an interference optical system in a direct-imaging microscope to improve 3D resolution by axially-selective excitation of fluorescence within a specimen. The excitation field can be thought of as a weighting factor for the point-spread function (PSF) of the microscope, so that the optical transfer function (OTF) gets expanded by convolution with the Fourier transform of the field intensity. The simplest EFS system is the standing-wave fluorescence microscope, in which an axially-periodic excitation field is set up through the specimen by interference of a pair of collimated, coherent, s-polarized beams that enter the specimen from opposite sides at matching angles. In this case, spatial information about the object is recovered in the central OTF passband, plus two symmetric, axially-shifted sidebands. Gaps between these bands represent "lost" information about the 3D structure of the object. Because the sideband shift is equal to the spatial frequency of the standing-wave (SW) field, more complete recovery of information is possible by superposition of fields having different periods. When all of the fields have an antinode at a common plane (set to be coincident with the in-focus plane), the "synthesized" field is peaked in a narrow infocus zone.

Sign in / Sign up

Export Citation Format

Share Document