scholarly journals Influence of two-dimensional roughness element on boundary layer structure in the favourable pressure gradient region of the swept wing

2019 ◽  
Vol 234 (1) ◽  
pp. 20-27
Author(s):  
Stepan Tolkachev ◽  
Victor Kozlov ◽  
Valeriya Kaprilevskaya
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Layer Structure ◽  
Roughness Element ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Frequency Range ◽  
Swept Wing ◽  
Boundary Layer Structure ◽  
Roughness Elements

In this article, the results of research about stationary and secondary disturbances development behind the localized and two-dimensional roughness elements are presented. It is shown that the two-dimensional roughness element has a destabilizing effect on the disturbances induced by the three-dimensional roughness element lying upstream. In this case, the two-dimensional roughness element causes the appearance of stationary structures, and then secondary perturbations, whose frequency range lies lower than in the case of the stationary vortices excited by a three-dimensional roughness element.

Mechanisms of flow tripping by discrete roughness elements in a swept-wing boundary layer

2016 ◽  
Vol 796 ◽  
pp. 158-194 ◽  
Author(s):  
Holger B. E. Kurz ◽  
Markus J. Kloker
Keyword(s):  
Boundary Layer ◽  
Roughness Element ◽  
Three Dimensional ◽  
Finite Size ◽  
Roughness Height ◽  
Swept Wing ◽  
Global Instability ◽  
Critical Height ◽  
Roughness Elements ◽  
Dimensional Boundary

The effects of a spanwise row of finite-size cylindrical roughness elements in a laminar, compressible, three-dimensional boundary layer on a wing profile are investigated by direct numerical simulations (DNS). Large elements are capable of immediately tripping turbulent flow by either a strong, purely convective or an absolute/global instability in the near wake. First we focus on an understanding of the steady near-field past a finite-size roughness element in the swept-wing flow, comparing it to a respective case in unswept flow. Then, the mechanisms leading to immediate turbulence tripping are elaborated by gradually increasing the roughness height and varying the disturbance background level. The quasi-critical roughness Reynolds number above which turbulence sets in rapidly is found to be $Re_{kk,qcrit}\approx 560$ and global instability is found only for values well above 600 using nonlinear DNS; therefore the values do not differ significantly from two-dimensional boundary layers if the full velocity vector at the roughness height is taken to build $Re_{kk}$. A detailed simulation study of elements in the critical range indicates a changeover from a purely convective to a global instability near the critical height. Finally, we perform a three-dimensional global stability analysis of the flow field to gain insight into the early stages of the temporal disturbance growth in the quasi-critical and over-critical cases, starting from a steady state enforced by damping of unsteady disturbances.

The Role of Two-Dimensional Roughness Element in the Laminar-Turbulent Process in the Favorable Pressure Gradient of the Swept Wing

2014 ◽  
Vol 9 (4) ◽  
pp. 65-73
Author(s):  
Stepan Tolkachev ◽  
Valeria Kaprilevskaya ◽  
Viktor Kozlov
Keyword(s):  
Liquid Crystal ◽  
Roughness Element ◽  
Frequency Interval ◽  
Two Dimensional ◽  
Swept Wing ◽  
Liquid Crystal Thermography ◽  
Roughness Elements ◽  
Favorable Pressure Gradient ◽  
Turbulent Process

In the article using a liquid crystal thermography investigated the development of stationary and secondary disturbances, which were excited by cylindrical and two-dimensional roughness elements. It was shown, that two-dimensional roughness element has a destabilizing effect on disturbances, induced by cylindrical roughness element. Also the twodimensional roughness element is able to excite the stationary structures, and then the secondary disturbances the frequency interval of which is lower than in the case of stationary vortices excitation by cylindrical roughness element

scholarly journals Measurements in an incompressible three-dimensional turbulent boundary layer, under infinite swept-wing conditions, and comparison with theory

1975 ◽  
Vol 70 (1) ◽  
pp. 127-148 ◽  
Author(s):  
B. Van Den Berg ◽  
A. Elsenaar ◽  
J. P. F. Lindhout ◽  
P. Wesseling
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulent Boundary Layer ◽  
Three Dimensional ◽  
Adverse Pressure Gradient ◽  
Turbulent Shear ◽  
Two Dimensional ◽  
Swept Wing ◽  
Test Plate ◽  
Turbulent Shear Stress

First a three-dimensional turbulent boundary-layer experiment is described. This has been carried out with the specific aim of providing a test-case for calculation methods. Much attention has been paid to the design of the test set-up. An infinite swept-wing flow has been simulated with good accuracy. The initially two-dimensional boundary layer on the test plate was subjected to an adverse pressure gradient, which led to three-dimensional separation near the trailing edge of the plate. Next, a calculation method for three-dimensional turbulent boundary layers is discussed. This solves the boundary-layer equations numerically by finite differences. The turbulent shear stress is obtained from a generalized version of Bradshaw's two-dimensional turbulent shear stress equation. The results of the calculations are compared with those of the experiment. Agreement is good over a considerable distance; but large discrepancies are apparent near the separation line.

scholarly journals Transient growth in the flow past a three-dimensional smooth roughness element

2013 ◽  
Vol 724 ◽  
pp. 642-670 ◽  
Author(s):  
S. Cherubini ◽  
M. D. De Tullio ◽  
P. De Palma ◽  
G. Pascazio
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Roughness Element ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Base Flow ◽  
Energy Gain ◽  
Roughness Elements ◽  
Layer Flow ◽  
Optimal Disturbances

AbstractThis work provides a global optimization analysis, looking for perturbations inducing the largest energy growth at a finite time in a boundary-layer flow in the presence of smooth three-dimensional roughness elements. Amplification mechanisms are described which can bypass the asymptotical growth of Tollmien–Schlichting waves. Smooth axisymmetric roughness elements of different height have been studied, at different Reynolds numbers. The results show that even very small roughness elements, inducing only a weak deformation of the base flow, can localize the optimal disturbance characterizing the Blasius boundary-layer flow. Moreover, for large enough bump heights and Reynolds numbers, a strong amplification mechanism has been recovered, inducing an increase of several orders of magnitude of the energy gain with respect to the Blasius case. In particular, the highest value of the energy gain is obtained for an initial varicose perturbation, differently to what found for a streaky parallel flow. Optimal varicose perturbations grow very rapidly by transporting the strong wall-normal shear of the base flow, which is localized in the wake of the bump. Such optimal disturbances are found to lead to transition for initial energies and amplitudes considerably smaller than sinuous optimal ones, inducing hairpin vortices downstream of the roughness element.

On the evolution of a turbulent boundary layer induced by a three-dimensional roughness element

1992 ◽  
Vol 237 ◽  
pp. 101-187 ◽  
Author(s):  
P. S. Klebanoff ◽  
W. G. Cleveland ◽  
K. D. Tidstrom
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Turbulent Boundary Layer ◽  
Laminar Boundary Layer ◽  
Roughness Element ◽  
Three Dimensional ◽  
Outer Region ◽  
Stream Velocity ◽  
Mean Velocity ◽  
Roughness Elements

An experimental investigation is described which has as its objectives the extension of the technical data base pertaining to roughness-induced transition and the advancement of the understanding of the physical processes by which three-dimensional roughness elements induce transition from laminar to turbulent flow in boundary layers. The investigation was carried out primarily with single hemispherical roughness elements surface mounted in a well-characterized zero-pressure-gradient laminar boundary layer on a flat plate. The critical roughness Reynolds number at which turbulence is regarded as originating at the roughness was determined for the roughness elements herein considered and evaluated in the context of data existing in the literature. The effect of a steady and oscillatory free-stream velocity on eddy shedding was also investigated. The Strouhal behaviour of the ‘hairpin’ eddies shed by the roughness and role they play in the evolution of a fully developed turbulent boundary layer, as well as whether their generation is governed by an inflexional instability, are examined. Distributions of mean velocity and intensity of the u-fluctuation demonstrating the evolution toward such distributions for a fully developed turbulent boundary layer were measured on the centreline at Reynolds numbers below and above the critical Reynolds number of transition. A two-region model is postulated for the evolutionary change toward a fully developed turbulent boundary layer: an inner region where the turbulence is generated by the complex interaction of the hairpin eddies with the pre-existing stationary vortices that lie near the surface and are inherent to a flow about a three-dimensional obstacle in a laminar boundary layer; and an outer region where the hairpin eddies deform and generate turbulent vortex rings. The structure of the resulting fully developed turbulent boundary layer is discussed in the light of the proposed model for the evolutionary process.

Sign in / Sign up

Export Citation Format

Share Document