Three-Dimensional Analysis of Definitive Secondary Unilateral Cleft Rhinoplasty Using Cartilage Graft

2021 ◽  
pp. 105566562110340
Author(s):  
Thinnapat Hantawornchaikit ◽  
Raweewan Arayasantiparb ◽  
Kumar KC ◽  
Kiatanant Boonsiriseth
Keyword(s):  
Cleft Lip ◽  
Three Dimensional ◽  
Nasal Tip ◽  
Tip Projection ◽  
Alar Base ◽  
Cleft Rhinoplasty ◽  
Nasal Tip Projection ◽  
Base Width ◽  
Cleft Lip Nose

Objective Three-dimensional assessment of nasal morphology in patients with unilateral cleft lip nose treated by cartilage graft augmentation. Design Retrospective study. Patients and Intervention Thirteen patients with unilateral cleft lip nose underwent definitive secondary rhinoplasty and postsurgical changes were examined using a three-dimensional (3D) laser scan. Main Outcome Measure Nasal dorsum length, nasal tip, alar width, and alar base width in frontal view; nasion depth, nasal tip projection, nasal dorsal angle, and nasal tip angle in lateral view; nostril width, nostril height, and nasal tip height in basal view were measured at preoperative (T1: within 6 months), short follow-up (T2: 2-10 weeks), and long follow-up (T3: 9-14 months). Results A significant change in alar width, alar base width, nostril width, and nostril height at the cleft side, nasal dorsum length, nasion depth, nasal tip projection, and nasal tip height was observed from T1 to T3 follow-up after rhinoplasty ( P < .05), whereas the nostril height at the noncleft side was also significantly increased at T2 follow-up but the mean change in height relapsed at T3 follow-up. Alar width, alar base width, and nostril width at the noncleft side, and nasal tip angle did not change significantly after surgery at any follow-up period. Conclusions 3D imaging evaluation after secondary cleft rhinoplasty demonstrated improved functional and aesthetic outcomes using a septal or conchal graft.

scholarly journals Prosedur penatalaksanaan celah bibir inkomplit bilateral dan rinoplasti primer dengan modifikasi mulliken

2019 ◽  
Vol 49 (1) ◽  
pp. 93
Author(s):  
Al Hafiz ◽  
Debby Apri Grecwin
Keyword(s):  
Cleft Lip ◽  
Cochrane Library ◽  
Upper Lip ◽  
Literature Study ◽  
Nasal Tip ◽  
Tip Projection ◽  
Primary Rhinoplasty ◽  
Bilateral Cleft Lip ◽  
Modification Technique ◽  
Nasal Tip Projection

Latar belakang: Celah bibir dengan atau tanpa celah lelangit merupakan abnormalitas perkembangan kraniofasial yang paling sering terjadi. Kelainan ini bisa unilateral atau bilateral, dan mungkin disertai dengan anomali kongenital lain. Celah bibir bilateral berpotensi mengubah struktur dan bentuk wajah serta menyebabkan gangguan dalam perkembangan makan, bicara, gigi geligi, dan kosmetik. Celah bibir selalu disertai dengan deformitas hidung, termasuk pada kasus celah bibir inkomplit. Mulliken adalah pionir yang melakukan perbaikan celah bibir bilateral dan rinoplasti primer dalam satu tahap operasi. Tujuan: Mengetahui keberhasilan operasi celah bibir inkomplit bilateral dan rinoplasti primer dengan teknik modifikasi Mulliken. Laporan kasus: Dilaporkan satu kasus celah bibir inkomplit bilateral pada anak laki-laki usia 7 bulan yang ditatalaksana dengan teknik modifikasi Mulliken. Metode: Telaah literatur berbasis bukti mengenai perbaikan celah bibir inkomplit bilateral dan rinoplasti primer dengan teknik modifikasi Mulliken melalui database Cochrane library, Pubmed Medline, dan hand searching. Hasil: Pertumbuhan nasal tip projection, nasal width, columellar length, upper lip height, cutaneous lip height, dan vermilion-mucosal height mendekati nilai normal. Kesimpulan: Prosedur celah bibir inkomplit bilateral disertai rinoplasti primer dengan teknik modifikasi Mulliken memberikan hasil yang baik. Introduction: Cleft lip with or without cleft palate is the most common disorder of craniofacial development. This disorder could be occurred unilaterally or bilaterally, and sometimes were also accompanied by other type of congenital disorders. Bilateral cleft lip potentially could change the face structure and shape, causing interference in eating, speech, dental development, and aesthetics. Cleft lip always occurred with nasal deformity, even in incomplete cleft lip. Mulliken is a pioneer in performing a repair in bilateral cleft lip and primary rhinoplasty altogether at the same time. Purpose: To find out the result of surgery procedure in bilateral incomplete cleft lip and primary rhinoplasty using Mulliken modification technique. Case report: A bilateral incomplete cleft lip case in a 7 months old boy and managed by Mulliken modification technique. Method: Evidence based literature study of bilateral incomplete cleft lip and primary rhinoplasty with Mulliken modification technique through Cochrane library, Pubmed Medline, and hand searching. Result: The growth of nasal tip projection, nasal width, collumellar length, upper lip height, cutaneus lip height, and vermilion mucous height were close to normal size. Conclusion: Procedure of bilateral incomplete cleft lip and primary rhinoplasty repair using Mulliken modification technique delivered a good outcome.

Effectiveness of the Nasal Creator Device after Cheiloplasty in Patients with Cleft Lip and Palate as Measured by 3D Stereophotogrammetry

2021 ◽  
Vol 45 (4) ◽  
pp. 284-290
Author(s):  
Sulawan Waewsanga ◽  
Poonsak Pisek ◽  
Palakorn Surakunprapha ◽  
Surasith Piyasin ◽  
Araya Pisek
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Repeated Measure ◽  
Measure Anova ◽  
Affected Side ◽  
Alar Base ◽  
3D Stereophotogrammetry ◽  
A Prospective Study ◽  
Base Width

Objective: To evaluate nostril morphology post-cheiloplasty after patients with unilateral cleft lip and palate (UCLP) use of the nasal creator device. Study Design: This is a prospective study. Sixteen patients with nonsyndromic UCLP treated at Khon Kaen University underwent cheiloplasty and then wear the nasal creator device for 6 months. Three-dimensional images were taken, from which 5 lines and 8 landmark points were evaluated prior to (T0) and 1 day (T1), 1 month (T2), 3 months (T3), and 6 months (T4) after cheiloplasty. A Repeated Measure ANOVA was used to evaluate nostril changes between time periods and a paired t-test was used to compare values between the affected and non-affected side at T4 (P &lt; .05). Results: On the affected side, the nostril height significantly increased from T0 (2.46±0.89 mm) to T4 (4.22±1.03 mm), and the nostril width significantly decreased from T0 (9.46±2.57 mm) to T4 (7.34±1.41 mm). On the non-affected side, the nostril height significantly increased from T0 (3.39±0.78 mm) to T4 (4.65±1.07 mm), and the nostril width was not significantly different from T0 (6.00±1.25 mm) to T4 (6.59±0.95 mm). The alar base width was not significantly different between T0 (30.18±2.72 mm) and T4 (29.82±1.69 mm). Nostril height and width were not significantly different by T4 when comparing the affected and non-affected sides. Conclusion: Using nasal creator device for 6 months significantly increased the nostril height and decreased nostril width and alar base width after cheiloplasty.

Folded Cymba Concha: Is It Large and Stable Enough for Caudal Septal Extension Graft in Asian Rhinoplasty?

2021 ◽  
Author(s):  
Sik Namgoong ◽  
Soobyn Kim ◽  
Hyung-Rok Kim ◽  
Seong-Ho Jeong ◽  
Seung-Kyu Han ◽  
...  
Keyword(s):  
Septal Cartilage ◽  
Men And Women ◽  
Nasal Tip ◽  
Tip Projection ◽  
Tongue In Groove ◽  
Physical Validity ◽  
The Mean ◽  
Nasal Tip Projection ◽  
Extension Graft

Abstract Background Septal extension grafting (SEG) is used for nasal tip projection and positioning. Often, insufficient quadrangular cartilage is available for grafting in Asians and in most secondary cases, the septum is already harvested. We utilized the folded cymba concha as an alternative for caudal SEG (CSEG) by modifying a tongue-in-groove technique. Objectives To evaluate the physical validity of the cymba concha for CSEG and compare its outcomes with those of septal quadrangular cartilage. Methods The mean length and width of 311 harvested consecutive folded cymba conchae were measured from intraoperative photographs. Data from 220 patients with &gt;12 months of follow-up were retrospectively reviewed for clinical outcomes. Clinical demography was determined based on the need for additional spreader grafts. For clinical reliability, anthropometric photographs of patients in whom folded cymba conchae were used were compared with those in whom quadrangular cartilage was used. Results Mean lengths and widths of the folded cymba conchae in men and women were 24.2 ± 3.9 and 22.4 ± 3.7 mm, and 7.8 ± 1.9 and 7.2 ± 1.9 mm, respectively. Using the folded cymba concha graft significantly increased nasal tip projection by 28.9% and columellar-labial angle by 9.7%, improving both aspects postoperatively. Anthropometric comparison revealed no significant differences between folded cymba conchae and septal cartilage in terms of nasal tip projection (p = 0.264) and postoperative columellar-labial angle (p = 0.182). Conclusions Folded cymba conchal cartilage can be a primary option for CSEG in Asian septorhinoplasty cases or for individuals with insufficient septal cartilage remnants.

Digital Surface Photogrammetry for Anthropometric Analysis of the Cleft Infant Face

2006 ◽  
Vol 43 (3) ◽  
pp. 350-355 ◽  
Author(s):  
Michael Krimmel ◽  
Susanne Kluba ◽  
Margit Bacher ◽  
Klaus Dietz ◽  
Siegmar Reinert
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Upper Lip ◽  
Facial Deformity ◽  
Alar Base ◽  
Healthy Infants ◽  
Standard Values ◽  
Base Width ◽  
Plaster Casts

Objective To analyze the three-dimensional morphology of the cleft infant face with digital surface photogrammetry. Design Fifty plaster casts of unoperated infants with cleft lip and palate were imaged three-dimensionally with digital surface photogrammetry. Twenty-one standard craniofacial measurements were taken. The plaster casts were divided into 4 groups with unilateral, bilateral, complete, and incomplete clefts of the lip and palate. The measurements were compared with standard values for healthy infants. Results Significant differences (p < .0025) were found for the alar base width (33% to 55%), the alar base root width (59% to 103%), the width of the nose (7% to 25%), the length of the alar wing (18% to 25%), and the intercanthal (6% to 17%) and biocular (4% to 12%) width, depending on the cleft type. The vertical dimensions of the nose and the upper lip did not differ significantly from the controls. Conclusion This study describes preliminary data on the cleft infant facial deformity. The obtained results were mainly in agreement with data in the limited literature. Three-dimensional photogrammetry has proven to be reliable and can be applied more readily to potentially uncooperative patients.

Three-Dimensional Analysis of Bilateral Cleft Lip and Palate Nasal Deformity

2020 ◽  
Vol 58 (1) ◽  
pp. 105-113
Author(s):  
Lucas M. Harrison ◽  
Rami R. Hallac ◽  
Christopher A. Derderian
Keyword(s):  
Cleft Lip ◽  
Cleft Lip And Palate ◽  
Three Dimensional ◽  
Cross Sectional Study ◽  
Cross Sectional ◽  
Time Points ◽  
Alar Base ◽  
Nasolabial Angle ◽  
Base Width ◽  
Nasal Length

Objective: This cross-sectional study utilizes 3-dimensional analysis to assess nasal morphology in patients with bilateral cleft lip and palate (BCLP) compared to controls across the timeline of cleft care. Design: Retrospective comparative cross-sectional study. Setting: Tertiary pediatric academic institution. Patients and Participants: One hundred and twelve patients with BCLP and an equal number of age and sex-matched control participants. Main Outcome Measure(s): Nasolabial angle, nasal length, nasal protrusion, columella length, columella width, nasal tip width, alar width, and alar base width were collected at each time point. The measurements were collected pre-nasoalveolar molding (NAM) therapy, post-NAM therapy, post-primary cleft rhinoplasty, 1 year, 5 years, 10 years, and 15 years of age. Results: Nasolabial angle and nasal tip width were significantly different from controls from pre-NAM through 15 years of age time points. Nasal length was not significantly different at any time point. Alar width and alar base width were significantly different from pre-NAM through 10 years of age time points. Nasal protrusion, columella length, and columella width were significantly different from pre-NAM through 5 years of age time points. Conclusions: This study demonstrates that three-dimensional photogrammetry is effective in assessing the changes in nasal morphology that occur throughout the course of care in patients with BCLP from before cleft lip repair to the completion of nasal growth.

scholarly journals Three-dimensional changes of noses after transplantation of implant-type tissue-engineered cartilage for secondary correction of cleft lip–nose patients

2017 ◽  
Vol 7 ◽  
pp. 72-79 ◽  
Author(s):  
Kazuto Hoshi ◽  
Yuko Fujihara ◽  
Hideto Saijo ◽  
Kumiko Kurabayashi ◽  
Hideyuki Suenaga ◽  
...  
Keyword(s):  
Cleft Lip ◽  
Three Dimensional ◽  
Dimensional Changes ◽  
Engineered Cartilage ◽  
Cleft Lip Nose

The Contoured Auricular Projection Graft for Nasal Tip Projection

1999 ◽  
Vol 1 (4) ◽  
pp. 312-315 ◽  
Author(s):  
Jennifer Parker Porter ◽  
M. Eugene Tardy ◽  
Jacqueline Cheng
Keyword(s):  
Nasal Tip ◽  
Tip Projection ◽  
Nasal Tip Projection
Sign in / Sign up

Export Citation Format

Share Document